General configuration

All default configuration values are defined in timmy/conf.py. Timmy works with these values if no configuration file is provided. If a configuration file is provided via -c | --config option, it overlays the default configuration. An example of a configuration file is config.yaml.

Some of the parameters available in configuration file:

ssh_opts parameters to send to ssh command directly (recommended to leave at default), such as connection timeout, etc. See timmy/conf.py to review defaults.
env_vars environment variables to pass to the commands and scripts - you can use this to expand variables in commands or scripts
fuel_ip the IP address of the master node in the environment
fuel_user username to use for accessing Nailgun API
fuel_pass password to access Nailgun API
rqdir the path of rqdir, the directory containing scripts to execute and filelists to pass to rsync
out_dir directory to store output data
archive_dir directory to put resulting archives into
timeout timeout for SSH commands and scripts in seconds

Configuring actions

Actions can be configured in a separate yaml file (by default rq.yaml is used) and / or defind in the main config file or passed via command line options -P, -C, -S, -G.

The following actions are available for definition: * put - a list of tuples / 2-element lists: [source, destination]. Passed to scp like so scp source <node-ip>:destination. Wildcards supported for source. * cmds - a list of dicts: {'command-name':'command-string'}. Example: {'command-1': 'uptime'}. Command string is a bash string. Commands are executed in a sorted order of their names. * scripts - a list of script filenames located on a local system. If filename does not contain path separator, the script is expected ot be located inside rqdir/scripts. Otherwise the provided path is used to read the script. * files - a list of filenames to collect. passed to scp. Supports wildcards. * filelists - a list of filelist filenames located on a local system. Filelist is a text file containing files and directories to collect, passed to rsync. Does not support wildcards. If filename does not contain path separator, the filelist is expected to be located inside rqdir/filelists. Otherwise the provided path is used to read the filelist. * log_files ** path - base path to scan for logs ** include - regexp string to match log files against for inclusion (if not set = include all) ** exclude - regexp string to match log files against. Excludes matched files from collection. ** start - date or datetime string to collect only files modified on or after the specified time. Format - YYYY-MM-DD or YYYY-MM-DD HH:MM:SS

Filtering nodes

soft_filter - use to skip any operations on non-matching nodes
hard_filter - same as above but also removes non-matching nodes from NodeManager.nodes dict - useful when using timmy as a module

Nodes can be filtered by the following parameters defined inside soft_filter and/or hard_filter:

roles - the list of roles, ex. ['controller','compute']
online - enabled by default to skip non-accessible nodes
status - the list of statuses. Default: ['ready', 'discover']
ids - the list of ids, ex. [0,5,6]
any other attribute of Node object which is a simple type (int, float, str, etc.) or a list containing simple types

Lists match any, meaning that if any element of the filter list matches node value (if value is a list - any element in it), node passes.

Negative filters are possible by pretending filter parameter with no_, example: no_id = [0] will filter out Fuel.

Negative lists also match any - if any match / collision found, node is skipped.

You can combine any number of positive and negative filters as long as their names differ (since this is a dict).

You can use both positive and negative parameters to match the same node parameter (though it does not make much sense): roles = ['controller', 'compute'] no_roles = ['compute'] This will skip computes and run only on controllers. Like stated above, does not make much sense :)

Parameter-based configuration

It is possible to define special by_<parameter-name> dicts in config to (re)define node parameters based on other parameters. For example:

by_roles:
  controller:
    cmds: {'check-uptime': 'uptime'}

In this example for any controller node, cmds setting will be reset to the value above. For nodes without controller role, default (none) values will be used.

rqfile format

rqfile format is a bit different from config. The basic difference:

config:

scripts: [a ,b, c]
by_roles:
  compute:
    scripts: [d, e, f]

rqfile:

scripts:
  __default: [a, b, c]
  by_roles:
    compute: [d, e, f]

The config and rqfile definitions presented above are equivalent. It is possible to define config in a config file using the config format, or in an rqfile using rqfile format, linking to the rqfile in config with rqfile setting. It is also possible to define part here and part there. Mixing identical parameters in both places is not recommended - results may be unpredictable (such scenario was not thoroughly tested). In general rqfile is good for fewer settings with more parameter-based variations (by_), and main config for more different settings with less such variations.

Configuration application order

Configuration is assembled and applied in a specific order: 1. default configuration is initialized. See timmy/conf.py for details. 2. command line parameters, if defined, are used to modify the configuration. 3. rqfile, if defined (default - rq.yaml), is converted and injected into the configuration. At this stage the configuration is in its final form. 4. for every node, configuration is applied, except once_by_ directives: 4.1 first the top-level attributes are set 4.2 then by_<attribute-name> parameters except by_id are iterated to override or append(accumulate) the attributes 4.3 then by_id is iterated to override any matching attributes, redefining what was set before 5. finally once_by_`<attribute-name> parameters are applied - only for one matching node for any set of matching values. This is useful for example if you want a specific file or command from only a single node matching a specific role, like running nova list only on one controller.

Once you are done with the configuration, you might want to familiarize yourself with Usage </usage>.

6.8 KiB Raw Blame History