drbd-devstack/devstack/lib/drbd_devstack

#!/bin/bash
# vim: set et ts=4 sw=4 ft=sh :


function pre_install_drbd_devstack {
    # Install OS packages, if necessary
    if [[ ! -d "${FILES:?FILES not set yet}"  ]]; then
        mkdir "${FILES}"
    fi
    packages=('drbd-utils_8.9.3rc1-1_amd64.deb' 'drbd8-utils_8.9.3rc1-1_amd64.deb' 'drbd-dkms_9.0.0rc3-1_all.deb' 'python-drbdmanage_0.36-1_all.deb');
    # get packages
    for p in "${packages[@]}"; do
        if [[ ! -f "${FILES}/${p}" ]]; then
            # If there are newer packages, change the download number here.
            wget "http://openstack-ci-pkgs.linbit.com/packages/001/trusty/$p" -O "${FILES}/${p}"
        fi
    done
    # install packages
    for i in "${packages[@]}"; do
        if [[ -f "${FILES}/${i}" ]]; then
            echo "installing ${i}"
            sudo dpkg -i "${FILES}/${i}" || true
        fi
    done

    # Hotfix, until DRBDmanage 0.42 is released.
    sudo sed -i "s/NAME_MAXLEN\s*=.*/NAME_MAXLEN = 4095/" /usr/lib/python2.7/dist-packages/drbdmanage/storage/storagecore.py

    # now go fetch :)
    echo   echo "installing deps"
    #sudo apt-get update
    sudo apt-get install -f -y
    sudo apt-get install python-dbus -y
    return 0
}

function install_drbd_devstack {
    # Install the service.

    # write /etc/drbdmanage*.conf
    #echo "drbdctrl-vg     = $DRBD_DRBDCTRL_VG" >> /etc/drbdmanaged.conf
    #echo "volume-group    = $DRBD_DATA_VG"     >> /etc/drbdmanaged-lvm.conf
    sudo sed -i "s/^drbdctrl-vg\s*=.*/drbdctrl-vg = ${DRBD_DRBDCTRL_VG}/g" /etc/drbdmanaged.conf
    sudo sed -i "s/^volume-group\s*=.*/volume-group = ${DRBD_DATA_VG}/g" /etc/drbdmanaged-lvm.conf
    sudo sed -i "s/^volume-group\s*=.*/volume-group = ${DRBD_DATA_VG}/g" /etc/drbdmanaged-lvm-thinpool.conf
    sudo sed -i "s/^volume-group\s*=.*/volume-group = ${DRBD_DATA_VG}/g" /etc/drbdmanaged-lvm-thinlv.conf

#    Use the single-thinpool driver for these tests.
#    sudo sed -i "s/^storage-plugin\s*=.*/storage-plugin = drbdmanage.storage.lvm_thinpool_ng.LvmThinPoolNg/g" /etc/drbdmanaged.conf
    sudo sed -i "s/^storage-plugin\s*=.*/storage-plugin = drbdmanage.storage.lvm_thinlv.LvmThinLv/g" /etc/drbdmanaged.conf

    # allow the stack user access to drbdmanage
    sudo tee /etc/dbus-1/system.d/org.drbd.drbdmanaged-stack.conf > /dev/null << "EOF"
    <!DOCTYPE busconfig PUBLIC
        "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
        "http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
    <busconfig>
        <policy user="stack">
            <allow send_destination="org.drbd.drbdmanaged"/>
        </policy>
    </busconfig>
EOF

    # done.
}

function _drbd_make_vg {
    local vg_name="${1:?No VG name given}"
    local vg_size="$2"
    local vg_lo_dev="$3"

    local vg_dev="/dev/${vg_lo_dev}"

    # If the VG exists, there's nothing left to do.
    if sudo vgdisplay | grep -q "${vg_name}" ; then
        return
    fi

    # if the file exists, don't destroy it...
    if [[ ! -f "${FILES}/${vg_name}" ]]; then
        sudo truncate -s "${vg_size}" "${FILES}/${vg_name}"
    fi

    # if the loop device is present, don't recreate it...
    if [[ ! -e "${vg_dev}" ]]; then
        local vg_lo_minor="$(echo "${vg_lo_dev}" | sed 's/loop//g')"
        sudo mknod -m 660 "${vg_dev}" b 7 "${vg_lo_minor}"
    fi

    # if the file is already assigned a loop device, don't reassign
    if ! sudo losetup -a | grep "${vg_lo_dev}" | grep -q "${vg_name}" ; then
        sudo losetup "${vg_dev}" "${FILES}/${vg_name}"
    fi

    local lvm_cfg="devices { global_filter=[ 'a|$vg_lo_dev|' ] }"

#    # if the lvm.conf already accepts the loop device, don't insert it again
#    if ! sudo grep -q "${vg_lo_dev}" /etc/lvm/lvm.conf ; then
#        sudo sed -i.drbdctrl-bak "s/global_filter = \[ /global_filter = \[ \"a|${vg_lo_dev}|\", /g" /etc/lvm/lvm.conf
#    fi

    # if theres already a pv signature, don't try to recreate
    if ! sudo pvdisplay | grep -q "${vg_lo_dev}" ; then
        sudo pvscan --config "$lvm_cfg"

        if sudo pvdisplay | grep -q "${vg_lo_dev}" ; then
            sudo pvcreate --config "$lvm_cfg" "${vg_dev}"
        fi
    fi

    # if theres already a vg, don't try to recreate
    if ! sudo vgdisplay | grep -q "${vg_name}" ; then
        sudo vgscan
        if ! sudo vgdisplay | grep -q "${vg_name}" ; then
            sudo vgcreate --config "$lvm_cfg" "${vg_name}" "${vg_dev}"
        fi
    fi
}

function configure_drbd_devstack {
    # Configure the service.
    # This gets called before starting the c-vol service; the next callback,
    # init_drbd_devstack, is too late for that, so we need to make DRBDmanage
    # operational here.
    local be_name="${1:-drbdmanage}"

    # Initialize and start the service.
    # need to setup loopback device(s) for DRBD

    _drbd_make_vg "${DRBD_DRBDCTRL_VG:?DRBD_DRBDCTRL_VG is not set}" "${DRBD_DRBDCTRL_VG_SZ}" "${DRBD_DRBDCTRL_LODEV}"

    # Do the same thing for the DATA volume group
    _drbd_make_vg "${DRBD_DATA_VG:?DRBD_DATA_VG is not set}" "${DRBD_DATA_VG_SZ}" "${DRBD_DATA_LODEV}"

    local thinpool_size=$(echo $(LC_ALL=C sudo vgdisplay --columns  --units M --noheadings -o vg_free --nosuffix "${DRBD_DATA_VG}") \* 30 / 32 - 64 | bc)
    if ! sudo lvdisplay "${DRBD_DATA_VG}/drbdthinpool" ; then
        sudo /sbin/lvcreate -L "${thinpool_size}"M -T "${DRBD_DATA_VG}/drbdthinpool"
    fi

    # initialize drbdmanage
    sudo drbdmanage init --quiet
    sudo drbdmanage shutdown --quiet

    sudo drbdmanage debug 'set loglevel=debug'

    # FIXME: multi-node setups


    iniset $CINDER_CONF "$be_name" volume_backend_name "$be_name"
    iniset $CINDER_CONF "$be_name" volume_driver cinder.volume.drivers.drbdmanagedrv.DrbdManageDriver
}

function init_drbd_devstack {
    true
}

function shutdown_drbd_devstack {
    # Shut the service down.
    # drbdadm down all
    # drbdmanage shutdown --quiet
    echo "shutdown drbd devstack"
}

function cleanup_drbd_devstack {
    # Cleanup the service.
    # something like
    #     drbdmanage list-resource --short | xargs -l drbdmanage remove-resource
    # ???
    # drbdmanage resources -m | sed 's/,.*//g' | xargs -l drbdmanage remove-resource --quiet
    echo "cleanup drbd devstack"
}

#debug main
#source $(dirname '$0')/../settings
#pre_install_drbd_devstack
#install_drbd_devstack
#configure_drbd_devstack
#init_drbd_devstack

# Tell emacs to use shell-script-mode
## Local variables:
## mode: shell-script
## End: