--
-- HUAWEI-SEP-MIBv2.my
-- Wednesday, December 02, 2009 at 16:58:09
--
HUAWEI-SEP-MIB DEFINITIONS ::= BEGIN
IMPORTS
hwDatacomm
FROM HUAWEI-MIB
EnabledStatus
FROM P-BRIDGE-MIB
VlanId
FROM Q-BRIDGE-MIB
OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF
Integer32, Unsigned32, OBJECT-TYPE, MODULE-IDENTITY, OBJECT-IDENTITY,
InterfaceIndex, ifName
FROM IF-MIB
NOTIFICATION-TYPE
FROM SNMPv2-SMI
RowStatus
FROM SNMPv2-TC;
-- 1.3.6.1.4.1.2011.5.25.223
hwSepMIB MODULE-IDENTITY
LAST-UPDATED "200911171530Z"
ORGANIZATION
"Huawei Technologies Co.,Ltd."
CONTACT-INFO
"8090 Team Huawei Technologies Co.,Ltd.
Huawei Bld.,NO.3 Xinxi Rd.,
Shang-Di Information Industry Base,
Hai-Dian District Beijing P.R. China
http://www.huawei.com
Zip:100085
"
DESCRIPTION
"The private mib file includes the general extent
information of the device.hwDatacomm(165).hwSepMIB.
"
::= { hwDatacomm 223 }
--
-- Node definitions
--
-- Node definitions
--
-- 1.3.6.1.4.1.2011.5.25.223.1
hwSepObjects OBJECT IDENTIFIER ::= { hwSepMIB 1 }
-- 1.3.6.1.4.1.2011.5.25.223.1.1
hwSepResetPktCnt OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
unused(65535)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the packet counter of all running SEP ports.
The value of hwSepResetPktCnt is unused(65535) when it is read.
The value of hwSepResetPktCnt must be clear(1) when it is set."
::= { hwSepObjects 1 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2
hwSepSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSepSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table includes the information of SEP segments."
::= { hwSepObjects 2 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1
hwSepSegmentEntry OBJECT-TYPE
SYNTAX HwSepSegmentEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table includes the information of SEP segments.
The index of the table is SEP segment id."
INDEX { hwSepSegmentId }
::= { hwSepSegmentTable 1 }
HwSepSegmentEntry ::=
SEQUENCE {
hwSepSegmentId
Integer32,
hwSepControlVlanId
Integer32,
hwSepPreemptManual
Integer32,
hwSepPreemptDelay
Integer32,
hwSepBlockPortMode
INTEGER,
hwSepBlockPortHop
Integer32,
hwSepBlockPortSysname
OCTET STRING,
hwSepBlockPortIfname
OCTET STRING,
hwSepTcNotifySep
OCTET STRING,
hwSepTcNotifyRrpp
EnabledStatus,
hwSepTcNotifyStp
EnabledStatus,
hwSepTcNotifyVpls
EnabledStatus,
hwSepTcNotifyVll
EnabledStatus,
hwSepTcNotifySmartLinkCtrlVlan
Integer32,
hwSepDealSmartLinkFlush
EnabledStatus,
hwSepProtectedInstanceList
OCTET STRING,
hwSepTcProtectionInterval
Integer32,
hwSepSegmentRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.1
hwSepSegmentId OBJECT-TYPE
SYNTAX Integer32 (1..1024)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"SEP segment Identifier."
::= { hwSepSegmentEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.2
hwSepControlVlanId OBJECT-TYPE
SYNTAX Integer32 (0 | 1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The control VLAN identifier of the SEP segment.
If the value of the object is set 0, the operation is delete configuration."
::= { hwSepSegmentEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.3
hwSepPreemptManual OBJECT-TYPE
SYNTAX Integer32 (0..1)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Trigger the manual preemption by setting the object to be 1.
When getting the object it will always be 0."
::= { hwSepSegmentEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.4
hwSepPreemptDelay OBJECT-TYPE
SYNTAX Integer32 (0 | 15..600)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The preemption delay timer of the SEP segment.
If the value of the object is set 0, the operation is delete configuration."
::= { hwSepSegmentEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.5
hwSepBlockPortMode OBJECT-TYPE
SYNTAX INTEGER
{
optimal(1),
middle(2),
hop(3),
name(4),
null(5)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The way to choose the port to be blocked.
if the value of the object is set 1, the optimal port.
if the value of the object is set 2, the middle port.
if the value of the object is set 3, the port with the designated hop(hwSepBlockPortHop).
if the value of the object is set 4, the port with the designated system name(hwSepBlockPortSysname) and port name(hwSepBlockPortIfname).
if the value of the object is set 5, the operation is delete configuration of the block port.
BlockPortMode | BlockPortValue
| active inactive
-----------------------|------------------------------------------------------------------------------
optimal(1) | (1) (2/3/4)
middle(2) | (2) (1/3/4)
hop(3) | (3)(hwSepBlockPortHop) (1/2/4)
name(4) | (4)(hwSepBlockPortSysname & hwSepBlockPortIfname) (1/2/3)
"
::= { hwSepSegmentEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.6
hwSepBlockPortHop OBJECT-TYPE
SYNTAX Integer32 (0 | 1..512)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The hop count of the preffered blocking port.
If the value of the object is set 0, the operation is delete configuration.
If the mode of block port is not hop(3), the value is not have effect."
::= { hwSepSegmentEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.7
hwSepBlockPortSysname OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The system name of the preffered blocking port.
if not set the value of hwSepBlockPortIfname, this configuration is not take effect.
if the mode of block port is not name(4), this configuration is not task effect."
::= { hwSepSegmentEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.8
hwSepBlockPortIfname OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..63))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interface name of the preffered blocking port.
if not set the value of hwSepBlockPortSysname, this configuration is not take effect.
if the mode of block port is not name(4), this configuration is not take effect."
::= { hwSepSegmentEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.9
hwSepTcNotifySep OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..129))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The bitmap of the SEP segments to which the topology change event will be notified "
::= { hwSepSegmentEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.10
hwSepTcNotifyRrpp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set 1, the topology change event of the SEP segment will be notified to RRPP"
::= { hwSepSegmentEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.11
hwSepTcNotifyStp OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set 1, the topology change event of the SEP segment will be notified to STP"
::= { hwSepSegmentEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.12
hwSepTcNotifyVpls OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set 1, the topology change event of the SEP segment will be notified to VPLS"
::= { hwSepSegmentEntry 12 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.13
hwSepTcNotifyVll OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set 1, the topology change event of the SEP segment will be notified to VLL"
::= { hwSepSegmentEntry 13 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.14
hwSepTcNotifySmartLinkCtrlVlan OBJECT-TYPE
SYNTAX Integer32 (0 | 1..4094)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set control vlan, the topology change event of the SEP segment will be notified to Smart-Link.
If the value of the object is set 0, the operation is delete configuration."
::= { hwSepSegmentEntry 14 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.15
hwSepDealSmartLinkFlush OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"If set 1, the SEP segment will deal the smart link flush-FDB packet"
::= { hwSepSegmentEntry 15 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.16
hwSepProtectedInstanceList OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The protected instance list of the SEP segment"
::= { hwSepSegmentEntry 16 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.17
hwSepTcProtectionInterval OBJECT-TYPE
SYNTAX Integer32 (1..10)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The interval of tc-protection, the default value is 2."
::= { hwSepSegmentEntry 17 }
-- 1.3.6.1.4.1.2011.5.25.223.1.2.1.128
hwSepSegmentRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation of CreateAndGo can be used to create a new SEP segment,
and operation of Destroy be used to destroy an existent SEP segment."
::= { hwSepSegmentEntry 128 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3
hwSepTopologyTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSepTopologyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table includes the information of the topology of the SEP segment."
::= { hwSepObjects 3 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1
hwSepTopologyEntry OBJECT-TYPE
SYNTAX HwSepTopologyEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table includes the information of the topology of the SEP segment.
The index of the table is the segment identifier and the hop count of the port."
INDEX { hwSepSegmentId, hwSepHop }
::= { hwSepTopologyTable 1 }
HwSepTopologyEntry ::=
SEQUENCE {
hwSepHop
Integer32,
hwSepPortId
OCTET STRING,
hwSepTopoSysname
OCTET STRING,
hwSepTopoPortname
OCTET STRING,
hwSepTopoPortConfigPriority
Integer32,
hwSepTopoPortActivePriority
Integer32,
hwSepTopoConfigPortRole
Integer32,
hwSepTopoActivePortRole
Integer32,
hwSepTopoPortNbrState
INTEGER,
hwSepTopoBrotherPortId
OCTET STRING,
hwSepTopoNbrPortId
OCTET STRING,
hwSepTopoPortLinkState
INTEGER,
hwSepTopoPortFwdState
INTEGER
}
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.1
hwSepHop OBJECT-TYPE
SYNTAX Integer32 (1..512)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The hop count of the port."
::= { hwSepTopologyEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.2
hwSepPortId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device"
::= { hwSepTopologyEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.3
hwSepTopoSysname OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system name."
::= { hwSepTopologyEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.4
hwSepTopoPortname OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port name."
::= { hwSepTopologyEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.5
hwSepTopoPortConfigPriority OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configured port priority.The default value is 64."
::= { hwSepTopologyEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.6
hwSepTopoPortActivePriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active port priority."
::= { hwSepTopologyEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.7
hwSepTopoConfigPortRole OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The configued port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0x32"
::= { hwSepTopologyEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.8
hwSepTopoActivePortRole OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0x32"
::= { hwSepTopologyEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.9
hwSepTopoPortNbrState OBJECT-TYPE
SYNTAX INTEGER
{
down(1),
init(2),
preup(3),
up(4),
conflict(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the neighbor state machine:
state value
down 1
init 2
preup 3
up 4
conflict 5"
::= { hwSepTopologyEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.10
hwSepTopoBrotherPortId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The brother port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device"
::= { hwSepTopologyEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.11
hwSepTopoNbrPortId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The neighbor port identifier. For example: 00.E0.6E.70.23.00.00.00 (hex). The first 6 bytes is the mac address of the device"
::= { hwSepTopologyEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.12
hwSepTopoPortLinkState OBJECT-TYPE
SYNTAX INTEGER
{
down(1),
up(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The link state of the port:
state value
link down 1
link up 2"
::= { hwSepTopologyEntry 12 }
-- 1.3.6.1.4.1.2011.5.25.223.1.3.1.13
hwSepTopoPortFwdState OBJECT-TYPE
SYNTAX INTEGER
{
discarding(1),
forwarding(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forwarding state of the port:
state value
discarding 1
forwarding 2"
::= { hwSepTopologyEntry 13 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4
hwSepPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwSepPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table includes the information of SEP ports"
::= { hwSepObjects 4 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1
hwSepPortEntry OBJECT-TYPE
SYNTAX HwSepPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table includes the information of SEP ports.
The index of the table is SEP segment identifier, port type, port identifier1, port identifier2, port identifier3, port identifier4.
If it is an ethernet port including fast ethernet/gigabit ethernet/eth-trunk, the port type is 1, the port identifier1 is the IfIndex of the ethernet port.
the other port identifier is for extension and not used currently, should be set 0."
INDEX { hwSepSegmentId, hwSepPortType, hwSepPortId1, hwSepPortId2, hwSepPortId3,
hwSepPortId4 }
::= { hwSepPortTable 1 }
HwSepPortEntry ::=
SEQUENCE {
hwSepPortType
Unsigned32,
hwSepPortId1
Unsigned32,
hwSepPortId2
Unsigned32,
hwSepPortId3
Unsigned32,
hwSepPortId4
Unsigned32,
hwSepSysname
OCTET STRING,
hwSepPortname
OCTET STRING,
hwSepPortConfigPriority
Integer32,
hwSepPortActivePriority
Integer32,
hwSepConfigPortRole
Integer32,
hwSepActivePortRole
Integer32,
hwSepPortNbrState
INTEGER,
hwSepNbrPortId
OCTET STRING,
hwSepPortFwdState
INTEGER,
hwSepRxNbrPktCnt
Integer32,
hwSepTxNbrPktCnt
Integer32,
hwSepRxLsaInfoPktCnt
Integer32,
hwSepTxLsaInfoPktCnt
Integer32,
hwSepRxLsaAckPktCnt
Integer32,
hwSepTxLsaAckPktCnt
Integer32,
hwSepRxPreemptReqPktCnt
Integer32,
hwSepTxPreemptReqPktCnt
Integer32,
hwSepRxPreemptAckPktCnt
Integer32,
hwSepTxPreemptAckPktCnt
Integer32,
hwSepRxTcPktCnt
Integer32,
hwSepTxTcPktCnt
Integer32,
hwSepRxEpaPktCnt
Integer32,
hwSepTxEpaPktCnt
Integer32,
hwSepResetPortPktCnt
INTEGER,
hwSepPortRowStatus
RowStatus
}
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.1
hwSepPortType OBJECT-TYPE
SYNTAX Unsigned32 (1)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port type.Currently SEP just support ethernet port and the value is 1."
::= { hwSepPortEntry 1 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.2
hwSepPortId1 OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port identifier1, when the hwSepPortType is 1, the value of the object is the IfIndex of the port."
::= { hwSepPortEntry 2 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.3
hwSepPortId2 OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port identifier2, Currently it is not used and only for extension, should be set 0."
::= { hwSepPortEntry 3 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.4
hwSepPortId3 OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port identifier3, Currently it is not used and only for extension, should be set 0."
::= { hwSepPortEntry 4 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.5
hwSepPortId4 OBJECT-TYPE
SYNTAX Unsigned32 (0..2147483647)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port identifier4, Currently it is not used and only for extension, should be set 0."
::= { hwSepPortEntry 5 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.6
hwSepSysname OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..20))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The system name."
::= { hwSepPortEntry 6 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.7
hwSepPortname OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..16))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The port name"
::= { hwSepPortEntry 7 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.8
hwSepPortConfigPriority OBJECT-TYPE
SYNTAX Integer32 (1..128)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configured port priority.The default value is 64."
::= { hwSepPortEntry 8 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.9
hwSepPortActivePriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active port priority."
::= { hwSepPortEntry 9 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.10
hwSepConfigPortRole OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The configued port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0x32"
::= { hwSepPortEntry 10 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.11
hwSepActivePortRole OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The active port role:
role value
common 0x10
edge secondary 0x21
edge primary 0x22
no neighbor edge secondary 0x31
no neighbor edge primary 0x32"
::= { hwSepPortEntry 11 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.12
hwSepPortNbrState OBJECT-TYPE
SYNTAX INTEGER
{
down(1),
init(2),
preup(3),
up(4),
conflict(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The state of the neighbor state machine:
state value
down 1
init 2
preup 3
up 4
conflict 5"
::= { hwSepPortEntry 12 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.13
hwSepNbrPortId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..8))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The identifier of the neighbor port. For example: 00.E0.6E.70.23.00.00.00 (hex)
"
::= { hwSepPortEntry 13 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.14
hwSepPortFwdState OBJECT-TYPE
SYNTAX INTEGER
{
discarding(1),
forwarding(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The forwarding state of the port:
state value
discarding 1
forwarding 2"
::= { hwSepPortEntry 14 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.15
hwSepRxNbrPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received neighbor packets."
::= { hwSepPortEntry 15 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.16
hwSepTxNbrPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmited neighbor packets."
::= { hwSepPortEntry 16 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.17
hwSepRxLsaInfoPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received LSA information packets."
::= { hwSepPortEntry 17 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.18
hwSepTxLsaInfoPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted LSA information packets."
::= { hwSepPortEntry 18 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.19
hwSepRxLsaAckPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received LSA acknowledgement packets."
::= { hwSepPortEntry 19 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.20
hwSepTxLsaAckPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted LSA acknowledgement packets."
::= { hwSepPortEntry 20 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.21
hwSepRxPreemptReqPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received preemption request packets."
::= { hwSepPortEntry 21 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.22
hwSepTxPreemptReqPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted preemption request packets."
::= { hwSepPortEntry 22 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.23
hwSepRxPreemptAckPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received preemption acknowledgement packets."
::= { hwSepPortEntry 23 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.24
hwSepTxPreemptAckPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted preemption acknowledgement packets."
::= { hwSepPortEntry 24 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.25
hwSepRxTcPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received topology change packets."
::= { hwSepPortEntry 25 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.26
hwSepTxTcPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted topology change packets."
::= { hwSepPortEntry 26 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.27
hwSepRxEpaPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received topology change packets."
::= { hwSepPortEntry 27 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.28
hwSepTxEpaPktCnt OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of transmitted topology change packets."
::= { hwSepPortEntry 28 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.29
hwSepResetPortPktCnt OBJECT-TYPE
SYNTAX INTEGER
{
clear(1),
unused(65535)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Reset the packet counter of the port in the SEP segment.
The value of hwSepResetPktCnt is unused(65535) when it is read.
The value of hwSepResetPktCnt must be clear(1) when it is set."
::= { hwSepPortEntry 29 }
-- 1.3.6.1.4.1.2011.5.25.223.1.4.1.128
hwSepPortRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Operation of CreateAndGo can be used to have a port join the SEP segment.
and operation of Destroy be used to have a port leave the SEP segment."
::= { hwSepPortEntry 128 }
-- 1.3.6.1.4.1.2011.5.25.223.2
hwSepGroups OBJECT IDENTIFIER ::= { hwSepMIB 2 }
-- 1.3.6.1.4.1.2011.5.25.223.2.1
hwSepGlobalInfoGroup OBJECT-GROUP
OBJECTS { hwSepResetPktCnt }
STATUS current
DESCRIPTION
"The group of global information."
::= { hwSepGroups 1 }
-- 1.3.6.1.4.1.2011.5.25.223.2.2
hwSepSegmentInfoGroup OBJECT-GROUP
OBJECTS { hwSepSegmentId, hwSepControlVlanId, hwSepPreemptManual, hwSepPreemptDelay, hwSepBlockPortMode,
hwSepBlockPortHop, hwSepBlockPortSysname, hwSepBlockPortIfname, hwSepTcNotifySep, hwSepTcNotifyRrpp,
hwSepTcNotifyStp, hwSepTcNotifyVpls, hwSepTcNotifyVll, hwSepTcNotifySmartLinkCtrlVlan, hwSepDealSmartLinkFlush,
hwSepProtectedInstanceList, hwSepTcProtectionInterval, hwSepSegmentRowStatus }
STATUS current
DESCRIPTION
"The group of segment information."
::= { hwSepGroups 2 }
-- 1.3.6.1.4.1.2011.5.25.223.2.3
hwSepPortInfoGroup OBJECT-GROUP
OBJECTS { hwSepPortType, hwSepPortId1, hwSepPortId2, hwSepPortId3, hwSepPortId4,
hwSepSysname, hwSepPortname, hwSepPortConfigPriority, hwSepPortActivePriority, hwSepConfigPortRole,
hwSepActivePortRole, hwSepPortNbrState, hwSepNbrPortId, hwSepPortFwdState, hwSepRxNbrPktCnt,
hwSepTxNbrPktCnt, hwSepRxLsaInfoPktCnt, hwSepTxLsaInfoPktCnt, hwSepRxLsaAckPktCnt, hwSepTxLsaAckPktCnt,
hwSepRxPreemptReqPktCnt, hwSepTxPreemptReqPktCnt, hwSepRxPreemptAckPktCnt, hwSepTxPreemptAckPktCnt, hwSepRxTcPktCnt,
hwSepTxTcPktCnt, hwSepRxEpaPktCnt, hwSepTxEpaPktCnt, hwSepResetPortPktCnt, hwSepPortRowStatus }
STATUS current
DESCRIPTION
"The group of port information."
::= { hwSepGroups 3 }
-- 1.3.6.1.4.1.2011.5.25.223.2.4
hwSepTopologyInfoGroup OBJECT-GROUP
OBJECTS { hwSepHop, hwSepPortId, hwSepTopoSysname, hwSepTopoPortname, hwSepTopoPortConfigPriority,
hwSepTopoPortActivePriority, hwSepTopoConfigPortRole, hwSepTopoActivePortRole, hwSepTopoPortNbrState, hwSepTopoNbrPortId,
hwSepTopoPortLinkState, hwSepTopoPortFwdState, hwSepTopoBrotherPortId }
STATUS current
DESCRIPTION
"The group of topology information."
::= { hwSepGroups 4 }
END
--
-- HUAWEI-SEP-MIBv2.my
--