-- =================================================================
-- Copyright (C) 2008 by HUAWEI TECHNOLOGIES. All rights reserved
--
-- Description: HUAWEI DLDP MIB, this mib will maintain information of DLDP
-- protocol for datacomm product.
-- Reference:
-- Version: V1.00
-- History:
--
-- V1.00 2008-07-15 initial version
-- =================================================================
HUAWEI-DLDP-MIB DEFINITIONS ::= BEGIN
IMPORTS
TruthValue,MacAddress,TEXTUAL-CONVENTION,RowStatus
FROM SNMPv2-TC
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32,
OBJECT-IDENTITY, Unsigned32, NOTIFICATION-TYPE
FROM SNMPv2-SMI
OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
FROM SNMPv2-CONF
hwDatacomm
FROM HUAWEI-MIB
InterfaceIndex
FROM IF-MIB
EnabledStatus
FROM P-BRIDGE-MIB;
hwDldpMIB MODULE-IDENTITY
LAST-UPDATED "200807151430Z" -- July 15, 2008 at 14:30 GMT
ORGANIZATION
"Huawei Technologies co.,Ltd."
CONTACT-INFO
"R&D NanJing, Huawei Technologies co.,Ltd.
High hope mansion,
Baixia road,
Nanjing city
Zip:100085
Http://www.huawei.com
E-mail:support@huawei.com
Zip:100000
"
DESCRIPTION
"This file is a DLDP-MIB. It provides the functions such as
globally enabling or disabling the DLDP protocol, enabling the global
alarm, clearing statistics on ports and configuring work mode."
::= { hwDatacomm 173 }
-- Textual Convention
PortIndex ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Each port is uniquely identified by a port number. The port number ranges from 0
to 575."
SYNTAX Integer32(0..575)
-- ============================================================================
-- Node definitions
-- ============================================================================
hwDldpObjects OBJECT IDENTIFIER ::= { hwDldpMIB 1}
hwDldpPortTrapObjects OBJECT IDENTIFIER ::= { hwDldpMIB 2}
hwDldpTraps OBJECT IDENTIFIER ::= { hwDldpMIB 3 }
hwDldpConformance OBJECT IDENTIFIER ::= { hwDldpMIB 4 }
-- ============================================================================
--
-- ======================= Objects definitions=================================
--
-- ============================================================================
hwDldpConfiguration OBJECT IDENTIFIER ::= { hwDldpObjects 1}
hwDldpStatistics OBJECT IDENTIFIER ::= { hwDldpObjects 2}
hwDldpEnable OBJECT-TYPE
SYNTAX EnabledStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Globally enable or disable the DLDP configuration. If the hwDldpEnable
is 1, DLDP is enabled. If the hwDldpEnable is 2, DLDP is disabled.
By default, DLDP is disabled."
::= { hwDldpConfiguration 1 }
hwDldpUnidirectionalShutdown OBJECT-TYPE
SYNTAX INTEGER
{
auto(1),
manual(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"When the device discovers a one-way link, the shutdown mode of port. The modes include
auto and manual. By default, DLDP is auto."
::= { hwDldpConfiguration 2 }
hwDldpWorkMode OBJECT-TYPE
SYNTAX INTEGER
{
normal(1),
enhance(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"It configures the work mode of the DLDP protocol, including normal and enhanced mode.
By default, the mode is enhanced."
::= { hwDldpConfiguration 3 }
hwDldpAdvertInterval OBJECT-TYPE
SYNTAX Integer32(1..100)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global interval for sending advertisement packets for the DLDP configuration.
By default, the interval is 5s."
::= { hwDldpConfiguration 4 }
hwDelayDownTimer OBJECT-TYPE
SYNTAX Integer32(1..5)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global timeout of DelayDown timer. The value rangs from 1s to 5s,
By default, the time is 1s."
::= { hwDldpConfiguration 5 }
hwDldpAuthenMode OBJECT-TYPE
SYNTAX INTEGER
{
none(1),
md5(2),
simple(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global authentication mode of the DLDP configuration. It has three authentication
modes, including none, md5,and simple. By default the authentication mode
is none."
::= { hwDldpConfiguration 6 }
hwDldpMd5Password OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..24))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global md5 password for authentication when authentication is md5."
::= { hwDldpConfiguration 7 }
hwDldpSimplePassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..16))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Global simple password for authentication when authentication is simple."
::= { hwDldpConfiguration 8 }
hwDldpPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDldpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DLDP port configuration table."
::= { hwDldpConfiguration 9 }
hwDldpPortEntry OBJECT-TYPE
SYNTAX HwDldpPortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the DLDP port configuration table."
INDEX{ hwDldpPortIndex }
::= { hwDldpPortTable 1}
HwDldpPortEntry ::=
SEQUENCE{
hwDldpPortIndex PortIndex,
hwDldpPortStateReset TruthValue,
hwDldpPortState INTEGER,
hwDldpPortLinkState INTEGER,
hwDldpResetStatistics TruthValue,
hwDldpRowStatus RowStatus
}
hwDldpPortIndex OBJECT-TYPE
SYNTAX PortIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"It describes enabled DLDP port index. Each port is uniquely identified by a port number. It ranges from 0
to 575."
::= {hwDldpPortEntry 1}
hwDldpPortStateReset OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It describes the DLDP status of the reset port."
DEFVAL { false }
::= {hwDldpPortEntry 2}
hwDldpPortState OBJECT-TYPE
SYNTAX INTEGER
{
initial(1),
inactive(2),
active(3),
advertisement(4),
probe(5),
disable(6),
delayDown(7),
loop(8)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port state has seven states, including initial, inactive, active,
advertisement, probe, disable, and delayDown."
::= {hwDldpPortEntry 3}
hwDldpPortLinkState OBJECT-TYPE
SYNTAX INTEGER
{
up(1),
down(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Port state has two modes, including up and down."
::= {hwDldpPortEntry 4}
hwDldpResetStatistics OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"It clears the statistics of packets received and sent on the current
port."
::= { hwDldpPortEntry 5 }
hwDldpRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" Operation of CreateAndGo can be
used to create a new instance, and operation of Destroy be
used to destroy an existent index. But these operations
will not take effect if they are not activated by running the
command of activating or setting mib node of hwDldpEnable."
::= { hwDldpPortEntry 6 }
hwDldpNeighbourTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDldpNeighbourEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DLDP Neighbour configuration table."
::= { hwDldpConfiguration 10 }
hwDldpNeighbourEntry OBJECT-TYPE
SYNTAX HwDldpNeighbourEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the DLDP Neighbour configuration table."
INDEX{ hwDldpPortIndex, hwDldpNeighbourMacAddr, hwDldpNeighbourPortIndex}
::= { hwDldpNeighbourTable 1}
HwDldpNeighbourEntry ::=
SEQUENCE {
hwDldpNeighbourMacAddr
MacAddress,
hwDldpNeighbourPortIndex
Integer32,
hwDldpNeighbourPortName
OCTET STRING,
hwDldpNeighbourState
INTEGER,
hwDldpNeighbourAgeTime
Integer32
}
hwDldpNeighbourMacAddr OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the activated port detects a neighbor, it can record the neighbor information, including
MAC address of neighbor. The port may detect multiple neighbors."
::= {hwDldpNeighbourEntry 1}
hwDldpNeighbourPortIndex OBJECT-TYPE
SYNTAX Integer32(0..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"When the activated port detects a neighbor, it can record the port index of the neighbour."
::= {hwDldpNeighbourEntry 2}
hwDldpNeighbourPortName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the activated port detects a neighbor, it can record the port name of the neighbour."
::= {hwDldpNeighbourEntry 3}
hwDldpNeighbourState OBJECT-TYPE
SYNTAX INTEGER
{
unknown(1),
oneWay(2),
twoWay(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the activated port detects a neighbor, it can record the state of the neighbour, and its value includes unknown, one way, and two way."
::= {hwDldpNeighbourEntry 4}
hwDldpNeighbourAgeTime OBJECT-TYPE
SYNTAX Integer32(3..300)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"When the activated port detects a neighbor, it can record the aging time of the neighbor. The aging time
is three times the interval for sending advertisement packets."
::= {hwDldpNeighbourEntry 5}
hwDldpPortStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF HwDldpPortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DLDP port statics configuration table."
::= { hwDldpStatistics 1 }
hwDldpPortStatisticsEntry OBJECT-TYPE
SYNTAX HwDldpPortStatisticsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entries of the table of the packets sent or received on the DLDP port."
INDEX{ hwDldpPortIndex }
::= { hwDldpPortStatisticsTable 1}
HwDldpPortStatisticsEntry ::=
SEQUENCE {
hwDldpPortStatisticsTx
Counter32,
hwDldpPortStatisticsRxTotal
Counter32,
hwDldpPortStatisticsRxError
Counter32,
hwDldpPortStatisticsRxLoop
Counter32,
hwDldpPortStatisticsRxValid
Counter32,
hwDldpPortStatisticsRxAuthenFail
Counter32
}
hwDldpPortStatisticsTx OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It describes the number of packets sent on the activated port."
::= {hwDldpPortStatisticsEntry 1}
hwDldpPortStatisticsRxTotal OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It describes the number of packets received on the activated port."
::= {hwDldpPortStatisticsEntry 2}
hwDldpPortStatisticsRxError OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It describes the number of error packets received on the activated port."
::= {hwDldpPortStatisticsEntry 3}
hwDldpPortStatisticsRxLoop OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It describes the number of loop packets received on the activated port."
::= {hwDldpPortStatisticsEntry 4}
hwDldpPortStatisticsRxValid OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It describes the number of valid packets received on the activated port."
::= {hwDldpPortStatisticsEntry 5}
hwDldpPortStatisticsRxAuthenFail OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"It describes the number of authentication failure packets received on the activated port."
::= {hwDldpPortStatisticsEntry 6}
hwDldpTrapInterfaceIndex OBJECT-TYPE
SYNTAX InterfaceIndex
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"It describes the interface index of the activated port that detected one way or found that two way is resumed."
::= { hwDldpPortTrapObjects 1 }
hwDldpTrapIfName OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..64))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"It describes the interface name of the activated port that detected one way or found that two way is resumed."
::= { hwDldpPortTrapObjects 2 }
hwDldpTrapFaultReason OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(0..64))
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"It describes the reason interface fault."
::= { hwDldpPortTrapObjects 3 }
---Notifycation
hwDldpUnidirectionalLink NOTIFICATION-TYPE
OBJECTS {hwDldpTrapInterfaceIndex, hwDldpTrapIfName, hwDldpTrapFaultReason}
STATUS current
DESCRIPTION
"Notify the NMS that the DLDP detected one way. The hwDldpTrapInterfaceIndex node is the interface index."
::= { hwDldpTraps 1}
hwDldpLinkResume NOTIFICATION-TYPE
OBJECTS {hwDldpTrapInterfaceIndex, hwDldpTrapIfName}
STATUS current
DESCRIPTION
"Notify the NMS that the DLDP detected that unidirectional link was resumed. The hwDldpTrapInterfaceIndex node is interface index."
::= { hwDldpTraps 2}
hwDldpLoopDetect NOTIFICATION-TYPE
OBJECTS {hwDldpTrapInterfaceIndex, hwDldpTrapIfName}
STATUS current
DESCRIPTION
"Notify the NMS that the DLDP detected Loop State. The hwDldpTrapInterfaceIndex node is the interface index."
::= { hwDldpTraps 3}
hwDldpLoopResume NOTIFICATION-TYPE
OBJECTS {hwDldpTrapInterfaceIndex, hwDldpTrapIfName}
STATUS current
DESCRIPTION
"Notify the NMS that the DLDP detected Loop State was resumed. The hwDldpTrapInterfaceIndex node is interface index."
::= { hwDldpTraps 4}
--
-- ***********************************************************
--
-- HAUWEIDLDPMIBCONFORMANCE
--
-- ***********************************************************
--
hwDldpCompliances OBJECT IDENTIFIER ::= { hwDldpConformance 1 }
hwDldpGroups OBJECT IDENTIFIER ::= { hwDldpConformance 2 }
-- compliance statements
hwDldpCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement
the HUAWEI-DLDP-MIB."
MODULE -- this module
MANDATORY-GROUPS {
hwDldpConfigGroup,
hwDldpStatisticsGroup,
hwDldpPortGroup,
hwDldpPortTrapGroup,
hwDldpTrapGroup
}
::= { hwDldpCompliances 1 }
-- MIB groupings
hwDldpConfigGroup OBJECT-GROUP
OBJECTS {
hwDldpEnable,
hwDldpUnidirectionalShutdown,
hwDldpWorkMode,
hwDldpAdvertInterval,
hwDelayDownTimer,
hwDldpAuthenMode,
hwDldpMd5Password,
hwDldpSimplePassword
}
STATUS current
DESCRIPTION
"The collection of objects which are used to configure the
DLDP implementation behavior.
This group is mandatory for agents which implement the DLDP."
::= { hwDldpGroups 1 }
hwDldpStatisticsGroup OBJECT-GROUP
OBJECTS {
hwDldpPortStatisticsTx,
hwDldpPortStatisticsRxTotal,
hwDldpPortStatisticsRxError,
hwDldpPortStatisticsRxLoop,
hwDldpPortStatisticsRxValid,
hwDldpPortStatisticsRxAuthenFail
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent DLDP
statistics.
This group is mandatory for agents which implement the DLDP
and have the capability of receiving and transmitting DLDP frames."
::= { hwDldpGroups 2 }
hwDldpPortGroup OBJECT-GROUP
OBJECTS {
hwDldpPortStateReset,
hwDldpPortState,
hwDldpPortLinkState,
hwDldpResetStatistics,
hwDldpRowStatus,
hwDldpNeighbourPortName,
hwDldpNeighbourState,
hwDldpNeighbourAgeTime
}
STATUS current
DESCRIPTION
"The collection of objects indicates the information of port."
::= { hwDldpGroups 3 }
hwDldpPortTrapGroup OBJECT-GROUP
OBJECTS { hwDldpTrapInterfaceIndex, hwDldpTrapIfName }
STATUS current
DESCRIPTION
"The collection of objects indicates that the activated port index detected one way or found that two way is resumed."
::= { hwDldpGroups 4 }
hwDldpTrapGroup NOTIFICATION-GROUP
NOTIFICATIONS {
hwDldpUnidirectionalLink,
hwDldpLinkResume,
hwDldpLoopDetect,
hwDldpLoopResume
}
STATUS current
DESCRIPTION
"The collection of notifications used to indicate that the HUAWEI-DLDP-MIB
data is consistent and indicate the general status information.
This group is mandatory for agents which implement the DLDP
and have the capability of receiving DLDP frames."
::= { hwDldpGroups 5 }
END
--
-- HUAWEI-DLDP-MIB.mib
--