#set hostname=$getVar('hostname',None)
#set partition = $getVar('partition', None)
#set partition_size = $getVar('partition_size', None)
#set partition_maxsize = $getVar('partition_maxsize', None)

#if $hostname == None
#set $vgname = "VolGroup00"
#else
#set $vgname = $hostname.split('.')[0]
#end if

declare -A disk_mapping
set \$(ls -l /dev/disk/by-path | awk '{print \$9; print \$11}')
let disk_mapping_nums=\$#/2
let disk_mapping_offset=0
echo "disk_mapping_nums: \$disk_mapping_nums" > /tmp/log
echo "disk_mapping_offset: \$disk_mapping_offset" >> /tmp/log
echo "disk_mapping: $*" >> /tmp/log
while [ \$disk_mapping_offset -lt \$disk_mapping_nums ];
do
    let found_disk_type=0
#if $getVar('disk_type_only','') != ""
    if expr match "\$1" ".*-${disk_type_only}-.*"; then
        let found_disk_type=1
    fi
#else
    let found_disk_type=1
#end if
    if [ \$found_disk_type -gt 0 ]; then
        disk_name=\$(basename \$2)
        disk_mapping[\$disk_name]=\$1
    fi
    let disk_mapping_offset=\$disk_mapping_offset+1 
    shift 2
done
for key in \${!disk_mapping[@]}; do
    echo "disk mapping \$key => \${disk_mapping[\$key]}" >> /tmp/log
done

declare -A disks
set \$(list-harddrives)
let disk_nums=\$#/2
let disk_offset=0
let found_disk_offset=0
while [ \$disk_offset -lt \$disk_nums ];
do
let found_disk=0
if [[ x"\${disk_mapping[\$1]}" == x"" ]]; then
    echo "ignore disk \$1 since it is not in disk_mapping" >> /tmp/log
else
#if $getVar('partitions_only',  '') != ""
    #for $partition_only in $partitions_only.split(',')
    if expr match "\$1" "$partition_only"; then
        let found_disk=1
    else
        echo "disk \$1 does not match $partition_only" >> /tmp/log
    fi
    #end for
#else
    let found_disk=1
#end if
fi
if [ \$found_disk -gt 0 ]; then
    echo "add disk \$1 in partitioning list" >> /tmp/log
#if $getVar('partition_by_path', '0') != "0"
    disks[\$found_disk_offset]=/dev/disk/by-path/\${disk_mapping[\$1]}
#else
    disks[\$found_disk_offset]=\$1
#end if
    let found_disk_offset=\$found_disk_offset+1
fi
let disk_offset=\$disk_offset+1
shift 2
done
echo "disks \${disks[@]}" >> /tmp/log
#if $getVar('sort_disks', '0') != "0" 
sorted_disks=(\$(printf '%s\n' \${disks[@]} | sort))
#else
sorted_disks=(\${disks[@]})
#end if
echo "sorted disks \${sorted_disks[@]}" >> /tmp/log

#if $getVar('start_from_disk', '') != ""
set \${sorted_disks[@]}
sorted_disks=(\${@:$start_from_disk})
echo "sorted disks begin from the $start_from_disk: \${sorted_disks[@]}" >> /tmp/log
#end if

#if $getVar('disk_num', '') != ""
set \${sorted_disks[@]}
sorted_disks=(\${@:1:$disk_num})
echo "sorted disks for $disk_num disks: \${sorted_disks[@]}" >> /tmp/log
#end if
let disk_nums=\${#sorted_disks[@]}
sorted_disks_str=""
for disk in \${sorted_disks[@]}; do
    sorted_disks_str="\${sorted_disks_str},\${disk}"
done

echo "clearpart --all --initlabel" > /tmp/part-include

#if $getVar('keep_old_partitions', '0') != "0"
echo "only partition \$sorted_disks_str" >> /tmp/log
echo "ignoredisk --only-use=\$sorted_disks_str" >> /tmp/part-include
#end if

declare -A partitions_percentage
declare -A partitions_name
declare -A partitions_size
declare -A partitions_maxsize

#if $partition != None
    #set vol_sizes = [part.strip() for part in $partition.split(';') if part.strip()]
    #for vol_and_size in $vol_sizes
        #set vol, vol_size = $vol_and_size.split(' ', 1)
        #set vol = $vol.strip()
	#if $vol == '/'
	    #set volname = 'root'
	#elif $vol == 'swap'
	    #set volname = 'swap'
	#elif $vol.startswith('/')
            #set volname = $vol[1:].replace('/', '_')
	#else
	    #set volname = ''
# $vol is not starts with / 
        #end if
partitions_name[$vol]=$volname
        #set vol_size = $vol_size.strip()
        #if $vol_size.endswith('%'):
            #set vol_percent = $vol_size[:-1]
partitions_percentage[$vol]=${vol_percent}
        #else
	    #if $vol_size.endswith('K')
	        #set vol_min_size = $int($vol_size[:-1]) / 1000
	    #elif $vol_size.endswith('M')
	        #set vol_min_size = $int($vol_size[:-1])
	    #elif $vol_size.endswith('G')
	        #set vol_min_size = $int($vol_size[:-1]) * 1000
	    #elif $vol_size.endswith('T')
	        #set vol_min_size = $int($vol_size[:-1]) * 1000000
	    #else
	        #set vol_min_size = $int($vol_size)
	    #end if
partitions_size[$vol]=${vol_min_size}
        #end if
    #end for
#end if

#if $partition_size != None
    #set vol_sizes = [part.strip() for part in $partition_size.split(';') if part.strip()]
    #for vol_and_size in $vol_sizes
        #set vol, vol_size = $vol_and_size.split(' ', 1)
        #set vol = $vol.strip()
	#if $vol_size.endswith('K')
	    #set vol_min_size = $int($vol_size[:-1]) / 1000
	#elif $vol_size.endswith('M')
	    #set vol_min_size = $int($vol_size[:-1])
	#elif $vol_size.endswith('G')
	    #set vol_min_size = $int($vol_size[:-1]) * 1000
	#elif $vol_size.endswith('T')
	    #set vol_min_size = $int($vol_size[:-1]) * 1000000
	#else
	    #set vol_min_size = $int($vol_size)
	#end if
partitions_size[$vol]=${vol_min_size}
    #end for
#end if

#if $partition_maxsize != None
    #set vol_sizes = [part.strip() for part in $partition_maxsize.split(';') if part.strip()]
    #for vol_and_size in $vol_sizes
        #set vol, vol_size = $vol_and_size.split(' ', 1)
        #set vol = $vol.strip()
	#if $vol_size.endswith('K')
	    #set vol_max_size = $int($vol_size[:-1]) / 1000
	#elif $vol_size.endswith('M')
	    #set vol_max_size = $int($vol_size[:-1])
	#elif $vol_size.endswith('G')
	    #set vol_max_size = $int($vol_size[:-1]) * 1000
	#elif $vol_size.endswith('T')
	    #set vol_max_size = $int($vol_size[:-1]) * 1000000
	#else
	    #set vol_max_size = $int($vol_size)
	#end if
partitions_maxsize[$vol]=${vol_max_size}
    #end for
#end if

default_partition=$getVar('default_partition', '/')
partition_fstype=$getVar('partition_fstype', 'ext3')

for key in \${!partitions_name[@]}; do
    echo "partition names \$key => \${partitions_name[\$key]}" >> /tmp/log
done

for key in \${!partitions_percentage[@]}; do
    echo "partition percentage \$key => \${partitions_percentage[\$key]}" >> /tmp/log
done

for key in \${!partitions_size[@]}; do
    echo "partition min size \$key => \${partitions_size[\$key]}" >> /tmp/log
done

echo "default partition \${default_partition}" >> /tmp/log
echo "partition fstype \${partition_fstype}" >> /tmp/log

for key in \${!partitions_maxsize[@]}; do
    echo "partition max size \$key => \${partitions_maxsize[\$key]}" >> /tmp/log
done

partition_size=\${partitions_size[/boot]:-500}
unset \${partitions_name[/boot]}
echo "bootloader --location=mbr --driveorder=\${sorted_disks[0]}" >> /tmp/part-include
echo "zerombr" >> /tmp/part-include
echo "part biosboot --fstype=biosboot --size=1 --ondisk=\${sorted_disks[0]}" >> /tmp/part-include
echo "part /boot --fstype=\${partition_fstype} --size=\${partition_size} --ondisk=\${sorted_disks[0]}  --asprimary" >> /tmp/part-include
partition_size=\${partitions_size[swap]:-0}
if [[ "\$partition_size" == "0" ]]; then
    partition_maxsize=\${partitions_maxsize[swap]:-128000}
    echo "part swap --recommended --maxsize=\${partition_maxsize} --ondisk=\${sorted_disks[0]}" >> /tmp/part-include
else
    echo "part swap --size=\${partition_size} --ondisk=\${sorted_disks[0]}" >> /tmp/part-include
fi
unset \${partitions_name[swap]}

if [[ x"\${partitions_name[/]}" == x"" ]]; then
    partitions_name[/]="root"
fi

vggroup=''
let disk_offset=0
while [ \$disk_offset -lt \$disk_nums ];
do
let pv_id=\$disk_offset+1
partname="pv.0\$pv_id"
echo "part \$partname --size=1 --grow --ondisk=\${sorted_disks[\$disk_offset]}" >> /tmp/part-include
vggroup="\$vggroup \$partname"
let disk_offset=\$disk_offset+1;
done

echo "volgroup $vgname \$vggroup" >> /tmp/part-include

declare -A sorted_partitions
sorted_partitions[0]=\${default_partition}
partition_offset=1
for key in \${!partitions_name[@]}; do
    if [[ "\$key" != "\${default_partition}" ]]; then
        sorted_partitions[\${partition_offset}]=\$key
	let partition_offset=\${partition_offset}+1
    fi
done

for key in \${sorted_partitions[@]}; do
    partition_name=\${partitions_name[\$key]}
    if [[ "\$key" == "\${default_partition}" ]]; then
        grow_param="--grow"
    else
        grow_param=""
    fi
    partition_percentage=\${partitions_percentage[\$key]}
    if [[ x"\${partition_percentage}" != x"" ]]; then
        percentage_param="--percent=\${partition_percentage}"
	grow_param="--grow"
    else
        percentage_param=""
    fi
    partition_size=\${partitions_size[\$key]}
    if [[ x"\${partition_size}" != x"" ]]; then
        size_param="--size=\${partition_size}"
    else
        size_param="--size=1"
    fi
    partition_maxsize=\${partitions_maxsize[\$key]}
    if [[ x"\${partition_maxsize}" != x"" ]]; then
        maxsize_param="--maxsize=\${partition_maxsize}"
    else
        maxsize_param=""
    fi
    echo "logvol \$key --fstype=\${partition_fstype} --vgname=$vgname \${percentage_param} \${size_param} \${maxsize_param} \${grow_param} --name=\${partition_name}vol" >> /tmp/part-include
done