starlingx/metal
Code Issues Proposed changes
metal/kickstart/files/miniboot.cfg
Kyle MacLeod d634510319 Perform remote ostree pull during local-based ostree install 
For Redfish-based subcloud installs which use a local ostree repo as the
basis of their install, we perform a secondary ostree pull from the
system controller. This will pull any ostree commits which have been
applied (via patch) since the local ostree repo was created.

Note that this also requires syncing of the patch metadata via
/opt/patching. This step is done via the install ansible playbook.

Test Plan:

PASS:
- Simulate a local ostree-based install during a sushy subcloud add in
  libvirt. Verify that a remote ostree pull retrieves any patch commits
  from the system controller. This is done by manipulating ostree repo
  contents on the system controller during the miniboot.cfg kicktart.

PASS:
- Prestage a subcloud from a non-patched system controller.
  Prestaged ostree_repo is stored on platform-backup partition.
  Patch the system controller. Add the prestaged subcloud.
  Verify that the subcloud boots and that the patched ostree commit
  is transferred to the subcloud during the miniboot.cfg kickstart.

Partial-Bug: 1998256

Signed-off-by: Kyle MacLeod <kyle.macleod@windriver.com>
Change-Id: Iee08b40dc2b930dacbbf4df08b0f727eb945d4ba
2022-11-30 21:24:01 -05:00

2995 lines
114 KiB
INI
Raw Blame History

#
# Copyright (c) 2022 Wind River Systems, Inc.
# SPDX-License-Identifier: Apache-2.0
#
############################################################################
#
# StarlingX Debian Unified Miniboot/USB Install Kickstart
#
############################################################################
#
# This is the unified kickstart for Debian installation of subcloud nodes
# from the USB or over Redfish.
#
# IMPORTANT:
# This file is derived from kickstart.cfg. Since we must pull bug fixes
# from kickstart.cfg, developers should be mindful to minimize the diff
# between the two files.
#
# The Linux Assembly Tool (LAT) performs a unified install for all subcloud
# nodes and exposes boot loader environment variables to this kickstart.
#
# This kickstart must be called with the 'traits=' boot parameter.
# Valid traits are:
#
# controller ... the controller function
# storage ... the storage function
# worker ... the worker function
# lowlatency ... the low latency function
#
# Valid node personality trait groupings ... set configuration function
#
# traits=controller ... Controller
# traits=controller,worker ... All-in-one
# traits=controller,worker,lowlatency ... All-in-one Low Latency
# traits=storage ... Storage
# traits=worker ... Worker
# traits=worker,lowlatency ... Worker Low Latency
#
# Kickstart Stages
#
# Kickstart Early - Common Functions Script
# Pre Partition - Pre Disk Setup Common Script
# Partition - Partition Disks
# Mkfs - Format Partitions & LVM Volumes
# Post - Traits & Platform Config File update
# Post - Persistent Interface Setup
# Post - Set Kernel Args
# Post - Interface Setup
# Post Nochroot - Kickstart Finalize Install UUID
# Post Nochroot - Restage OSTree repo
# - Save Install Scripts and Logs
# Post - Log Filesystem Setup
# Post Nochroot - Workarounds for enabling integration
# Post Nochroot - Set up filesystems access
# Post Nochroot - Set up package links per node type
#
###########################################################################
#
# The first kickstart script creates '/tmp/lat/functions' common functions
# file that can be loaded from any of the other hook sections.
#
###########################################################################
# Kickstart Early - Common Functions Script
%ks-early --interpreter=/bin/bash
# Define a hook to report error log if install failed
cat << EOF > /tmp/lat/report_error_log.sh
#!/bin/bash
_dev=\$(blkid --label fluxdata -o device)
if [ "\$_dev" != "" ] ; then
mkdir -p /t
mount -o rw,noatime \$_dev /t
echo "Save install-fail.log to partition fluxdata /var (\$_dev)"
sleep 2
cp /install.log /t/install-fail.log
umount /t
fi
EOF
chmod 755 /tmp/lat/report_error_log.sh
cat << EOF >> /tmp/lat/ks_functions.sh
[ "\${HOOK_LABEL}" = "" ] && HOOK_LABEL="unknown"
export LOG_DIR="var/log"
export LAT_DIR="tmp/lat"
export LOGFILE="/\${LAT_DIR}/miniboot.log"
############################################################################
# log utils
############################################################################
function log()
{
local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
echo "\$dt miniboot \${HOOK_LABEL} info: \${prefix} \$1" >>\${LOGFILE}
}
function ilog()
{
[ -z "\${stdout}" ] && stdout=1
local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
echo "\$dt miniboot \${HOOK_LABEL} info: \${prefix} \$1" >&\${stdout}
echo "\$dt miniboot \${HOOK_LABEL} info: \${prefix} \$1" >>\${LOGFILE}
}
function dlog()
{
if [ \${debug} -ne 0 ] ; then
[ -z "\$stdout" ] && stdout=1
local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
echo "\$dt miniboot \${HOOK_LABEL} debug: \${prefix} \$1" >&\${stdout}
echo "\$dt miniboot \${HOOK_LABEL} debug: \${prefix} \$1" >>\${LOGFILE}
fi
}
function wlog()
{
[ -z "\$stdout" ] && stdout=1
local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
echo "\$dt miniboot \${HOOK_LABEL} warn: \${prefix} \$1" >&\${stdout}
echo "\$dt miniboot \${HOOK_LABEL} warn: \${prefix} \$1" >>\${LOGFILE}
}
function elog()
{
[ -z "\$stdout" ] && stdout=1
local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")"
echo "\$dt miniboot \${HOOK_LABEL} error: \${prefix} \$1" >&\${stdout}
echo "\$dt miniboot \${HOOK_LABEL} error: \${prefix} \$1" >>\${LOGFILE}
}
########################################################################
# Name : report_failure_with_msg
# Purpose : Report installation error, offer a console and
# reboot on exit.
# Parameters: \$1 is the failure message string
# Return : Does not return
########################################################################
function report_failure_with_msg()
{
local msg=\${1}
echo -e '\n\nInstallation failed.\n'
wlog "Installation Failed: ERROR: \${msg}"
echo "... dropping to shell ; exit to reboot ..."
sleep 1
bash
reboot -f
}
########################################################################
# Name : get_disk
# Parameters: \$1 - ??????
# Returns : No return but common disk name is echo's to stdio
#########################################################################
function get_disk()
{
echo "\$(cd /dev ; readlink -f \$1)"
}
#########################################################################
# Name : get_by_path
# Parameters: \$1 - device name i.e. /dev/sda
# Returns : echo of device name by-path
# example: /dev/disk/by-path/pci-0000:03:00.0-scsi-0:2:0:0
#
# Notes: During kickstarts there are 2 links to a generic /dev/sd<X>.
# Example: pci-0000:00:1f.2-ata-1 and pci-0000:00:1f.2-ata-1.0.
# After reboot only the longer 'ata-1.0' exists.
# Reverse the parsing so we return the longer path.
#########################################################################
function get_by_path()
{
# log "Function: get_by_path '\${1}'"
local disk=\$(cd /dev ; readlink -f \$1)
reverse_list=""
for p in /dev/disk/by-path/*; do
reverse_list="\${p} \${reverse_list}"
done
for p in \${reverse_list}; do
if [ "\$disk" = "\$(readlink -f \$p)" ]; then
echo "\$p"
return
fi
done
}
#########################################################################
# Name : get_disk_dev
# Purpose : get the disk name
# Returns : echo of the first disk name found ; base on coded priority
#########################################################################
function get_disk_dev()
{
local disk
# Detect HDD
for blk_dev in vda vdb sda sdb dda ddb hda hdb; do
if [ -d /sys/block/\$blk_dev ]; then
disk=\$(ls -l /sys/block/\$blk_dev | grep -v usb | head -n1 | sed 's/^.*\([vsdh]d[a-z]\+\).*\$/\1/');
if [ -n "\$disk" ]; then
echo "\$disk"
return
fi
fi
done
for blk_dev in nvme0n1 nvme1n1; do
if [ -d /sys/block/\$blk_dev ]; then
disk=\$(ls -l /sys/block/\$blk_dev | grep -v usb | head -n1 | sed 's/^.*\(nvme[01]n1\).*\$/\1/');
if [ -n "\$disk" ]; then
echo "\$disk"
return
fi
fi
done
}
#########################################################################
# Name : exec_retry
# Purpose : Retry operations up to a caller specified ...
# Parameters: $1 - retries - up to number of retries before giving up
# $2 - time in seconds between each retry
# $3 - the command string to execute
# Returns : exit code from last command operation
#########################################################################
function exec_retry()
{
local retries=\${1}
local interval=\${2}
local command=\${3}
# local variables
retry_count=1
local ret_code=0
local ret_stdout=""
command="\${command}" # 2>&\${stdout}"
while [ \${retry_count} -le \${retries} ]; do
# dlog "Running command: '\${command}'."
ret_stdout=\$(eval \${command})
ret_code=\${?}
[ \${ret_code} -eq 0 ] && break
wlog "Error running command '\${command}'. Try \${retry_count} of \${retries} retry in \${interval}s."
wlog "ret_code: \${ret_code}, stdout: '\${ret_stdout}'."
sleep \${interval}
retry_count=\$((retry_count+1))
done
echo "\${ret_stdout}"
return \${ret_code}
}
#########################################################################
# Name : exec_no_fds
# Purpose : Execute command (with retries) after closing fds
# Parameters: $1 - List of volume file descriptors
# $2 - the command string to execute
# $3 - up to number of retries before giving up
# $4 - time in seconds between each retry
# Returns : exit code from last command operation
#########################################################################
function exec_no_fds()
{
# Close open FDs when executing commands that complain about leaked FDs.
local fds=\${1}
local cmd=\${2}
local retries=\${3}
local interval=\${4}
local ret_code=0
local ret_stdout=""
for fd in \${fds}
do
local cmd="\${cmd} \$fd>&-"
done
if [ -z "\${retries}" ]; then
#wlog "Running command: '\${cmd}'."
eval "\${cmd}"
else
ret_stdout=\$(exec_retry "\${retries}" "\${interval}" "\${cmd}")
ret_code=\${?}
echo "\${ret_stdout}"
return \${ret_code}
fi
}
#########################################################################
# Name : is_miniboot
# Returns : true : 0 if this is remote subcloud install (redfish)
# false: 1
#########################################################################
function is_miniboot()
{
if [ "\$(grep -c 'ip=' /proc/cmdline)" -ne 0 ]; then
return 0
else
return 1
fi
}
#########################################################################
# Name : is_system_node_install
# Returns : true : 0 if 'pxecontroller' is in $insturl boot arg
# false: 1
#########################################################################
function is_system_node_install()
{
# minboot: always false
return 1
}
#########################################################################
# Name : is_usb_install
# Returns : true :0
# false:1
#########################################################################
function is_usb_install()
{
# minboot: always false
return 1
}
#########################################################################
# Name : check_prestage
# Returns : true :0
# false:1
#########################################################################
function check_prestage()
{
# minboot: always false
return 1
}
#########################################################################
# Name : is_prestage
# Returns : true :0
# false:1
#########################################################################
function is_prestage()
{
# minboot: always false
return 1
}
#########################################################################
# Name : update_platform_conf
# Purpose : Update the platform.conf file with logging
#########################################################################
PLATFORM_CONF="/etc/platform/platform.conf"
function update_platform_conf()
{
ilog "update \${IMAGE_ROOTFS}\${PLATFORM_CONF} : \${1}"
echo "\${1}" >> \${IMAGE_ROOTFS}\${PLATFORM_CONF}
}
#########################################################################
# Name : get_iface_from_ethname
# Purpose : Translate eth# interface to the alternate predicitive
# interface name'altname'.
# Parameter: eth# name interface string to translate
# Return : echo's of altname interface string
#########################################################################
# TODO: Move to where its used if there is only one section caller
function get_iface_from_ethname()
{
iface=\${1}
# log the interface info for post issue debug
udevadm info --export --query=property --path=/sys/class/net/\${iface} >> \${LOGFILE}
# convert to predictive name: ONBOARD > SLOT > PATH
# https://wiki.debian.org/NetworkInterfaceNames
altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_ONBOARD)
altname=\${altname#ID_NET_NAME_ONBOARD=}
if [ -z "\${altname}" ] ; then
# try searching for ID_NET_NAME_SLOT
log "... retrying to translate \${iface} to predictive name with ID_NET_NAME_SLOT filter label "
altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_SLOT)
altname=\${altname#ID_NET_NAME_SLOT=}
fi
if [ -z "\${altname}" ] ; then
# try searching for ID_NET_NAME_PATH
log "... retrying to translate \${iface} to predictive name with ID_NET_NAME_PATH filter label "
altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_PATH)
altname=\${altname#ID_NET_NAME_PATH=}
fi
# The altname is seen enveloped with tick's ; 'eno1'
# Handle with and without tick's just in case
if [ -z "\${altname}" ] ; then
log "Failed to translate \${iface} to predictive name"
elif [ "\${altname::1}" = "'" ] ; then
echo "\${altname:1:-1}"
else
echo "\${altname}"
fi
}
function display_volume_info ()
{
if [ \${debug} -ne 0 ] ; then
ilog "Volume Info:\${1}"
pvscan 2>/dev/null
pvscan 2>/dev/null >> \${LOGFILE}
lvscan 2>/dev/null
lvscan 2>/dev/null >> \${LOGFILE}
pvdisplay 2>/dev/null
pvdisplay 2>/dev/null >> \${LOGFILE}
lvdisplay 2>/dev/null
lvdisplay 2>/dev/null >> \${LOGFILE}
fi
}
display_mount_info()
{
if [ \${debug} -ne 0 ] ; then
echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
lsblk -o name,mountpoint,label,size,uuid
echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
fi
}
function log_lvm_conf ()
{
local msg=\${1}
local conf=\${2}
lvm_global_filter=\$(cat \${conf} | grep "global_filter =")
lvm_preferred_names=\$(cat \${conf} | grep "preferred_names =")
ilog "\${msg}: \${conf}: \${lvm_global_filter}"
ilog "\${msg}: \${conf}: \${lvm_preferred_names}"
}
function breakpoint()
{
echo "*** BREAKPOINT ***: \${1} ; type exit to continue"
bash
echo "continuing from breakpoint: \${1}"
}
function set_variable()
{
touch "/\${LAT_DIR}/\${1}"
}
function get_variable()
{
[ -e "/\${LAT_DIR}/\${1}" ] && return 1
return 0
}
function clr_variable()
{
rm -f "/\${LAT_DIR}/\${1}"
}
#########################################################################
# Name : get_aio_controller_provisioning_sizes
# Purpose : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return : Nothing, but exports key values
#########################################################################
function get_aio_controller_provisioning_sizes()
{
gib=\$((1024*1024*1024))
# Partitions
export PART_SZ_EFI=300
export PART_SZ_BOOT=2048
export PART_SZ_ROOT=0
# Logical volumes
export LV_SZ_LOG=8000
export LV_SZ_ROOT=20480
export LV_SZ_SCRATCH=16000
export LV_SZ_VAR=20480
##
## NOTE: updates to partition sizes need to be also reflected in
## - config/.../sysinv/conductor/manager.py:create_controller_filesystems()
## - config/.../sysinv/common/constants.py
##
## NOTE: When adding partitions, we currently have a max of 4 primary partitions.
## If more than 4 partitions are required, we can use a max of 3 --asprimary,
## to allow 1 primary logical partition with extended partitions
##
## NOTE: Max default PV size must align with the default controllerfs sizes
##
##
## NOTE TO REVIEWERS:
## This section was talen from CentOS and needs to be updated for Debian.
##
##***********************************************************************
## Large disk install (for disks over 240GB)
## - DB size is doubled to allow for upgrades
##
## BACKUP_OVERHEAD = 5GiB
## DEFAULT_PLATFORM_STOR_SIZE = 10GiB
## DEFAULT_DATABASE_STOR_SIZE = 10GiB
## BACKUP = DEFAULT_DATABASE_STOR_SIZE +
## DEFAULT_PLATFORM_STOR_SIZE +
## BACKUP_OVERHEAD = 25GiB
## LV_SZ_LOG = 8GiB
## LV_SZ_ROOT = 20 GiB
## LV_SZ_SCRATCH = 16GiB
## LV_SZ_VAR = 20 GiB
## RABBIT_LV = 2GiB
## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
## KUBERNETES_DOCKER_STOR_SIZE = 30GiB
## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB
## ETCD_STOR_SIZE = 5GiB
## CEPH_MON_SIZE = 20GiB
## KUBELET_STOR_SIZE = 10GiB
## DC_VAULT_SIZE = 15GiB
## RESERVED_PE = 16MiB (based on pesize=32768)
##
## MINIMUM_PLATFORM_PV_SIZE = (10 + 2*10 + 25 + 8 + 20 + 16 + 20 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 218.02GiB
##
##***********************************************************************
## Small disk install - (for disks below 240GB)
## - DB size is doubled to allow for upgrades
##
## DEFAULT_PLATFORM_STOR_SIZE = 10GiB
## DEFAULT_SMALL_DATABASE_STOR_SIZE = 5GiB
## DEFAULT_SMALL_BACKUP_STOR_SIZE = 20GiB
##
## LV_SZ_LOG = 8GiB
## LV_SZ_SCRATCH = 16GiB
## RABBIT_LV = 2GiB
## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
## KUBERNETES_DOCKER_STOR_SIZE = 30GiB
## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB
## ETCD_STOR_SIZE = 5GiB
## CEPH_MON_SIZE = 20GiB
## KUBELET_STOR_SIZE = 10GiB
## DC_VAULT_SIZE = 15GiB
## RESERVED_PE = 16MiB (based on pesize=32768)
##
## MINIMUM_PLATFORM_PV_SIZE = (10 + 2*5 + 20 + 8 + 16 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 163.02GiB
##
##***********************************************************************
## Tiny disk install - (for disks below 154GB)
##
## NOTE: Tiny disk setup is mainly for StarlingX running in QEMU/KVM VM.
##
## DEFAULT_TINY_PLATFORM_STOR_SIZE = 1GiB
## DEFAULT_TINY_DATABASE_STOR_SIZE = 1GiB
## DEFAULT_TINY_BACKUP_STOR_SIZE = 1GiB
##
## LV_SZ_LOG = 3GiB
## LV_SZ_SCRATCH = 2GiB
## RABBIT_LV = 2GiB
## DEFAULT_EXTENSION_STOR_SIZE = 1GiB
## TINY_KUBERNETES_DOCKER_STOR_SIZE = 20GiB
## TINY_DOCKER_DISTRIBUTION_STOR_SIZE = 8GiB
## TINY_ETCD_STOR_SIZE = 1GiB
## TINY_KUBELET_STOR_SIZE = 2GiB
##
## MINIMUM_PLATFORM_PV_SIZE = (1 + 2*1 + 1 + 3 + 2 + 2 + 1 + 20 + 8 + 1 + 2)GiB = 43GiB
##
## MINIMUM_TINY_DISK_SIZE = MINIMUM_PLATFORM_PV_SIZE + PART_SZ_ROOT + PART_SZ_EFI + PART_SZ_BOOT + FLUXDATA + BACKUP_SIZE
## = 43 + 20 + 0.03 + 0.5 + 20 + 1 = 85GiB
# TODO: create a log representing 'free space" on self expand partition.
# TODO: Do the math for this new environment
# The default disk size thresholds must align with the ones in
# config/.../sysinv/common/constants.py
# which are DEFAULT_SMALL_DISK_SIZE
# MINIMUM_SMALL_DISK_SIZE
default_small_disk_size=240
minimum_small_disk_size=196
sz=\$(blockdev --getsize64 \${INSTDEV})
ilog "Install disk \${INSTDEV} has size:\${sz}B, \$((\${sz}/\$gib))GiB"
# Round MINIMUM_PLATFORM_PV_SIZE to the closest upper value that can be divided by 1024.
if [ \${sz} -gt \$((\${default_small_disk_size}*\${gib})) ] ; then
ilog "Large disk: MINIMUM_PLATFORM_PV_SIZE=219GiB*1024=224256 MiB"
export MINIMUM_PLATFORM_PV_SIZE=224256
export BACKUP_DEFAULT_PERSISTENT_SIZE=30000
elif [ \${sz} -ge \$((\${minimum_small_disk_size}*\${gib})) ] ; then
ilog "Small disk: MINIMUM_PLATFORM_PV_SIZE=164GiB*1024=167936 MiB"
export MINIMUM_PLATFORM_PV_SIZE=167936
export BACKUP_DEFAULT_PERSISTENT_SIZE=30000
else
ilog "Tiny disk: MINIMUM_PLATFORM_PV_SIZE=43GiB*1024=44032 MiB"
# Using a disk with a size under 85GiB will fail.
export MINIMUM_PLATFORM_PV_SIZE=44032
export LV_SZ_LOG=3000
export LV_SZ_SCRATCH=2000
export BACKUP_DEFAULT_PERSISTENT_SIZE=1000
fi
}
#########################################################################
# Name : get_std_controller_provisioning_sizes
# Purpose : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return : Nothing, but exports key values
#########################################################################
function get_std_controller_provisioning_sizes()
{
## NOTE: updates to partition sizes need to be also reflected in
## _controller_filesystem_limits() in sysinv/api/controllers/v1/istorconfig.py
# Partitions
export PART_SZ_EFI=300
export PART_SZ_BOOT=2048
export PART_SZ_ROOT=0
export BACKUP_DEFAULT_PERSISTENT_SIZE=30000
# Logical volumes
export LV_SZ_LOG=8000
export LV_SZ_ROOT=20480
export LV_SZ_SCRATCH=16000
export LV_SZ_VAR=20480
# Physical volumes
export MINIMUM_PLATFORM_PV_SIZE=0 # Use all available space
}
#########################################################################
# Name : get_worker_provisioning_sizes
# Purpose : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return : Nothing, but exports key values
#########################################################################
function get_worker_provisioning_sizes()
{
# miniboot: unused
ilog get_worker_provisioning_sizes
}
#########################################################################
# Name : get_storage_provisioning_sizes
# Purpose : Provide partition, physical volume, and logical volume sizes
# Parameter: None
# Return : Nothing, but exports key values
#########################################################################
function get_storage_provisioning_sizes()
{
# miniboot: unused
ilog get_storage_provisioning_sizes
}
#########################################################################
# Name : parse_miniboot_network_params
# Purpose : Setup IP addressing for two cases:
# 1) initial boot and 2) persistent across reboot
# Parameter: operation: one of 'initial' or 'persistent'
# Return : Nothing
#########################################################################
function parse_miniboot_network_params()
{
BOOTPARAM_MGMT_ADDRESS_FAMILY=
BOOTPARAM_IP_ADDR=
BOOTPARAM_VLAN=0
BOOTPARAM_GW=
BOOTPARAM_PREFIX_LEN=
BOOTPARAM_IFNAME=
BOOTPARAM_IP_VER=
BOOTPARAM_ROUTE_OPTIONS=
BOOTPARAM_METRIC=
BOOTPARAM_DNS=
# Pull out the ip= line from /proc/cmdline:
local ipstring
for arg in \$(cat /proc/cmdline); do
case "\$arg" in
ip=*)
ipstring=\${arg:3}
ilog "Using ip=\$ipstring"
break
;;
esac
done
ilog "Parsing boot ipstring=\$ipstring"
# Now we have a string like:
# <client-ip>,,<gw-ip>,<prefixlen>,<hostname>,<device>,off,<dns0-ip>,<dns1-ip>
# 1 2 3 4 5 6 7 8 9
# identify if ipv4 or ipv6, and get the ip address
#
# 10.10.10.22,,10.10.10.1,23,subcloud2,enp2s1,none (for ipv4)
# [2620:10a:a001:d41::212],,,64,subcloud3,ens1f0.401,none (for ipv6)
BOOTPARAM_IP_ADDR=\$(echo \$ipstring | awk -F',' '{print \$1}' | tr -d '\[\]')
BOOTPARAM_GW=\$(echo \$ipstring | awk -F',' '{print \$3}')
BOOTPARAM_PREFIX_LEN=\$(echo \$ipstring | awk -F',' '{print \$4}')
hostname=\$(echo \$ipstring | awk -F',' '{print \$5}')
BOOTPARAM_IFNAME=\$(echo \$ipstring | awk -F',' '{print \$6}')
# Do not setup DNS for now - we use IP addresses during boot:
# BOOTPARAM_DNS=\$(echo \$ipstring | awk -F',' '{print \$8}')
case "\$ipstring" in
*'['*)
# if has [ ] then it is ipv6:
BOOTPARAM_MGMT_ADDRESS_FAMILY="inet6"
BOOTPARAM_IP_VER="-6"
BOOTPARAM_METRIC="metric 1"
;;
*)
BOOTPARAM_MGMT_ADDRESS_FAMILY="inet"
BOOTPARAM_ROUTE_OPTIONS="via \$BOOTPARAM_GW"
;;
esac
# Parse the vlan= line from /proc/cmdline (if it exists):
local vlan=
for arg in \$(cat /proc/cmdline); do
case "\${arg}" in
vlan=*)
vlan=\${arg:5}
ilog "Parsing vlan=\${vlan}"
break
;;
esac
done
if [ -n "\${vlan}" ]; then
# Parameter format: "bootstrap_interface.bootstrap_vlan:bootstrap_interface"
dlog "Parsing vlan from \${vlan}"
vlan=\${vlan#*.} # remove prefix 'bootstrap_interface.'
vlan=\${vlan%:*} # remove suffix ':bootstrap_interface'
BOOTPARAM_VLAN=\${vlan}
BOOTPARAM_IFNAME=\${BOOTPARAM_IFNAME%.*} # remove suffix '.bootstrap_vlan'
fi
logmsg="Using IP values: ip:\$BOOTPARAM_IP_ADDR, family: \$BOOTPARAM_MGMT_ADDRESS_FAMILY"
if [ "\$BOOTPARAM_VLAN" -ne 0 ]; then
logmsg="\$logmsg vlan: \$BOOTPARAM_VLAN, "
fi
logmsg="\$logmsg prefix:\$BOOTPARAM_PREFIX_LEN, gw:\$BOOTPARAM_GW, ifname: \$BOOTPARAM_IFNAME, "
logmsg="\$logmsg route options: \$BOOTPARAM_ROUTE_OPTIONS, metric: \$BOOTPARAM_METRIC, dns: \$BOOTPARAM_DNS"
ilog "\$logmsg"
export BOOTPARAM_MGMT_ADDRESS_FAMILY
export BOOTPARAM_IP_ADDR
export BOOTPARAM_VLAN
export BOOTPARAM_GW
export BOOTPARAM_PREFIX_LEN
export BOOTPARAM_IFNAME
export BOOTPARAM_IP_VER
export BOOTPARAM_ROUTE_OPTIONS
export BOOTPARAM_METRIC
export BOOTPARAM_DNS
}
#########################################################################
# Name : wait_for_interface
# Purpose : Wait for interface to settle
# Parameter: interface name
# Return : Nothing
#########################################################################
function wait_for_interface()
{
local ifname=\$1
local timeout=\${2:-60}
local operstate=
local count_sec=0
ilog "Waiting for interface \${ifname} to settle... [timeout: \${timeout}s]"
while [ \${count_sec} -lt \${timeout} ]; do
sleep 1
if [ -e /sys/class/net/\${mgmt_dev}/operstate ]; then
operstate=\$(cat /sys/class/net/\${mgmt_dev}/operstate)
if [ "\$operstate" = up ]; then
ilog "\${mgmt_dev} operstate: up"
return
fi
dlog "\${mgmt_dev} operstate: \$operstate"
fi
count_sec=\$(( count_sec + 1 ))
done
case "\$operstate" in
unknown)
# see: https://www.kernel.org/doc/Documentation/networking/operstates.txt
wlog "Timeout: \${mgmt_dev} operstate: unknown. Allowing boot to continue."
return
;;
*)
report_failure_with_msg "Timeout waiting for interface \${ifname} to settle; operstate: \$operstate"
;;
esac
}
##########################################################################
# Global Kickstart Constants #
##########################################################################
#
# NOTE: exported Variables from other segments are NOT visible from functions
#
# Log the server firmware type
if [ -d /sys/firmware/efi ] ; then
ilog "UEFI Firmware execution"
USE_UEFI_PARTITIONS=1
else
ilog "BIOS Firmware execution"
USE_UEFI_PARTITIONS=0
fi
if [ "\${controller}" = true ] ; then
# Legacy locations of the backup partition
BACKUP_PART_UEFI=1
BACKUP_PART_BIOS=2
# Set the expected locations of the backup partition
if [ "\$USE_UEFI_PARTITIONS" = 0 ] ; then
BACKUP_PART_NO=\${BACKUP_PART_BIOS}
else
BACKUP_PART_NO=\${BACKUP_PART_UEFI}
fi
case \${INSTDEV} in
*"nvme"*)
BACKUP_PART=\${INSTDEV}p\${BACKUP_PART_NO}
;;
*)
BACKUP_PART=\${INSTDEV}\${BACKUP_PART_NO}
;;
esac
BACKUP_PART_LABEL="platform_backup"
# Note that the BA5EBA11-0000-1111-2222- is the prefix used by STX and it's
# defined in sysinv constants.py. Since the 000000000001 suffix is used by
# custom stx LVM partitions, the next suffix is used for the persistent backup
# partition (000000000002)
BACKUP_PART_GUID="BA5EBA11-0000-1111-2222-000000000002"
fi
# Node Personality Trait
TRAIT__CONTROLLER="controller"
TRAIT__STORAGE="storage"
TRAIT__WORKER="worker"
TRAIT__LOWLATENCY="lowlatency"
# System Types
SYSTEM_TYPE__AIO="All-in-one"
SYSTEM_TYPE__STANDARD="Standard"
# Node Subfunctions
SUBFUNCTION__CONTROLLER="\${TRAIT__CONTROLLER}"
SUBFUNCTION__STORAGE="\${TRAIT__STORAGE}"
SUBFUNCTION__WORKER="\${TRAIT__WORKER}"
SUBFUNCTION__AIO="\${TRAIT__CONTROLLER},\${TRAIT__WORKER}"
VOLUME_GROUPS="cgts-vg"
EOF
###############################
# END of Common Functions Block
###############################
chmod 755 /tmp/lat/ks_functions.sh
HOOK_LABEL="ks-early"
. /tmp/lat/ks_functions.sh
##########################################################################
# Global Kickstart variables #
##########################################################################
export debug=0
export prefix=""
# Assume there is no Platform Backup (persistent) Partition
export BACKUP_PART_FOUND=0
export BACKUP_PART_CURRENT_SIZE=0
export STOR_DEV_FDS=""
export PROC_SELF_FDS="$(ls -1 /proc/$$/fd | egrep -v "^(0|1|2|255)$" | xargs)"
for fd in ${PROC_SELF_FDS}; do
export realpath=$(readlink -f /proc/$$/fd/"${fd}")
if [ -e "${realpath}" ]; then
STOR_DEV_FDS="${STOR_DEV_FDS} ${fd}"
fi
done
##########################################################################
# Local Kickstart variables #
##########################################################################
BACKUP_PART_FIRST=0
BACKUP_PART_END=0
BACKUP_PART_SIZE=0
BACKUP_PART_FLAGS=0
BACKUP_PART_NAME=""
##########################################################################
ilog "*****************************************************"
ilog "*** Pre Partition - Volume Remove & Wipe Disk ***"
ilog "*****************************************************"
if [ -z "${traits}" ] ; then
report_failure_with_msg "No install traits specified ; need boot arg traits=<controller|worker|storage|lowlatency>"
fi
ilog "Waiting for disks to be available"
udevadm settle --timeout=300 || report_failure_with_msg "udevadm settle failed"
ilog "Disks became available"
export controller=false
export storage=false
export worker=false
export lowlatency=false
export aio=false
for trait in ${traits//,/ }; do
# dlog "trait:${trait}"
case ${trait} in
"controller") controller=true ;;
"storage") storage=true ;;
"worker") worker=true ;;
"lowlatency") lowlatency=true ;;
*) wlog "unknown trait '${trait}'" ;;
esac
done
# Force enable 'lowlatency' trait if the realtime kernel is detected ; PREEMPT_RT
uname=$(uname -a)
if [[ "${uname}" == *"PREEMPT_RT"* ]] ; then
if [ "${lowlatency}" = false ] ; then
wlog "forcing lowlatency trait after discovering the RT kernel"
lowlatency=true
fi
fi
# Handle trait conbination errors
#
# Handle no valid nodetypes specified
if [ "${controller}" = false -a "${storage}" = false -a "${worker}" = false ] ; then
report_failure_with_msg "No valid install traits specified ; ${traits} ; need boot arg traits=<controller|worker|storage>"
# Storage and controller don't go together
elif [ "${storage}" = true -a "${controller}" = true ] ; then
report_failure_with_msg "Cannot combine storage and controller traits"
# Storage and lowlatency don't go together
elif [ "${storage}" = true -a "${lowlatency}" = true ] ; then
report_failure_with_msg "Cannot combine storage and lowlatency traits"
# Storage and worker don't go together
elif [ "${storage}" = true -a "${worker}" = true ] ; then
report_failure_with_msg "Cannot combine storage and worker traits"
else
ilog "Install traits: $traits"
fi
# setup the install type for the log prefix
if [ "${controller}" = true -a "${worker}" = true ] ; then
aio=true
prefix="${SYSTEM_TYPE__AIO}"
elif [ "${controller}" = true ] ; then
prefix="${TRAIT__CONTROLLER}"
elif [ "${worker}" = true ] ; then
report_failure_with_msg "Invalid miniboot subcloud traits: $traits"
elif [ "${storage}" = true ] ; then
report_failure_with_msg "Invalid miniboot subcloud traits: $traits"
fi
if [ "${lowlatency}" = true ] ; then
prefix="${prefix}-${TRAIT__LOWLATENCY}"
fi
grep -q 'debug_kickstart' /proc/cmdline
if [ $? -eq 0 ]; then
debug=1
fi
# First, parse /proc/cmdline to find the boot args
set -- `cat /proc/cmdline`
ilog "/proc/cmdline:$*"
# for I in $*; do case "$I" in *=*) eval $I 2>/dev/null;; esac; done
for arg in $*; do
case "$arg" in
*=*)
eval $arg 2>/dev/null
log "arg : $arg"
;;
esac
done
# Note: This is equivalent to pre_disk_setup_common.cfg
# Name : check_execs
# Purpose: Confirm all the executables required by the kickstart are present
# Returns: 1 of one or more executable are missing
REQUIRED_EXECS="bc blkid dd lvcreate mkfs.ext4 partprobe pvremove pvs sgdisk vgcreate wipefs"
function check_execs()
{
missing_exec=0
for x in ${REQUIRED_EXECS} ; do
which ${x} > /dev/null 2>&1
if [ ${?} -ne 0 ] ; then
elog "dependency check failed ; required '${x}' exec is missing"
missing_exec=1
fi
done
return ${missing_exec}
}
# Log Traits
[ "${controller}" = true ] && ilog "Controller Function"
[ "${storage}" = true ] && ilog "Storage Function"
[ "${worker}" = true ] && ilog "Worker Function"
[ "${lowlatency}" = true ] && ilog "Low Latency Function"
# Log System Type
if [ ${aio} = true ] ; then
ilog "system"
else
ilog "${SYSTEM_TYPE__STANDARD} system"
fi
# Verify that all the required executables are presenty
check_execs
[ $? -ne 0 ] && report_failure_with_msg "Required executables are missing"
####################################################
# pre_common_head (obsolete with lat)
####################################################
# TODO: The installer does not have 'timezone'
# Does LAT handle this ?
wlog "timezone not set ; 'timezone --nontp --utc UTC'"
# We need both the system date and hwclock to be "close" to the current
# date/time, in order to avoid cases of invalid SSL certificates during
# interaction with the system controller. With the 'instdate'
# boot paramter, the system clock will already be initialized by LAT.
# If the hwclock differs from system date by a significant amount then
# we update it here based on the current system date.
#
# System date initialization summary:
# Note: NTP is not running at these early stages of install
#
# miniboot:
# - The system date is initialized to 'instdate' via LAT.
# Note that this may be several minutes out of sync with reality
# since instdate is a snapshot at time of bootimage.iso creation.
#
# ostree boot (after miniboot, prior to subcloud bootstrap):
# - The system date is initialized via hwclock.
#
# During miniboot we may have the case where the hwclock is more accurate
# than the system date. We therefore only want to adjust the hwclock if
# it is significantly different.
if [ -n "${instdate}" ]; then
ilog "Checking hwclock: $(hwclock), current date: $(date), instdate: $(date --date=${instdate})"
# Only adjust if date mismatch is > 20m
date_mismatch_threshold_secs=1200
current_date_epoch=$(date "+%s")
hwclock_date_epoch=$(date --date="$(hwclock --get --utc)" "+%s")
diff_epoch=$(( current_date_epoch - hwclock_date_epoch ))
# absolute value: strip off any '-' from front of string:
abs_diff_epoch=${diff_epoch#-}
if [ ${abs_diff_epoch} -gt ${date_mismatch_threshold_secs} ]; then
if [ -e /sbin/hwclock ] ; then
ilog "Aligning hwclock to system date"
/sbin/hwclock --systohc --utc
if [ $? -ne 0 ]; then
wlog "failed hwclock command ; /sbin/hwclock --systohc --utc [rc=${rc}]"
fi
else
wlog "lat initrd is missing /sbin/hwclock"
fi
ilog "System date is now: $(date), hwclock: $(hwclock)"
fi
else
elog "bootimage.iso was constructed without instdate: subcloud date may be out of sync"
fi
true
%end
# Pre Partition - Pre Disk Setup Common Script
%pre-part --interpreter=/bin/bash
HOOK_LABEL="pre-part"
. /tmp/lat/ks_functions.sh
#####################################################
# From pre_net_common.cfg for system node installs
#####################################################
if is_system_node_install -eq 0 ; then
# Setup ntp.conf and sync time
cat <<EOF >/etc/ntp_kickstart.conf
server pxecontroller
EOF
if [ -e /usr/sbin/ntpd ] ; then
/usr/sbin/ntpd -g -q -n -c /etc/ntp_kickstart.conf
rc=$?
if [ ${rc} -eq 0 ]; then
if [ -e /sbin/hwclock ] ; then
/sbin/hwclock --systohc --utc
if [ $? -ne 0 ]; then
wlog "failed hwclock command ; /sbin/hwclock --systohc --utc"
else
ilog "ntpd and hwclock set ok"
fi
else
wlog "lat initrd is missing /sbin/hwclock"
fi
else
wlog "ntpd setup failed rc:$rc ; /usr/sbin/ntpd -g -q -n -c /etc/ntp_kickstart.conf"
fi
else
wlog "lat initrd is missing /usr/sbin/ntpd"
fi
fi
#####################################################
# From pre_disk_setup_common.cfg
#####################################################
if [ -n "$INSTDEV" ] ; then
instdev_by_path=$(get_by_path $INSTDEV)
if [ -z ${instdev_by_path} ] ; then
report_failure_with_msg "invalid install device ${INSTDEV}"
else
ilog "Install device: ${INSTDEV} : ${instdev_by_path}"
fi
fi
# Get all block devices of type disk in the system.
# This includes solid state devices.
# Note: /dev/* are managed by kernel tmpdevfs while links in
# /dev/disk/by-path/ are managed by udev which updates them
# asynchronously so avoid using them while performing partition
# operations.
ilog "Detected storage devices:"
STOR_DEVS=""
for f in /dev/disk/by-path/*; do
dev=$(readlink -f $f)
# dlog "found device ${f}"
exec_retry 2 0.5 "lsblk --nodeps --pairs $dev" | grep -q 'TYPE="disk"'
if [ $? -eq 0 ] ; then
# Filter out ISO disk from storage devices
check_valid_dev $dev || continue
STOR_DEVS="$STOR_DEVS $dev"
ilog "Adding ${f} -> ${dev} to managed device list"
fi
done
# Filter STOR_DEVS variable for any duplicates as on some systems udev
# creates multiple links to the same device. This causes issues due to
# attempting to acquire a flock on the same device multiple times.
STOR_DEVS=$(echo "$STOR_DEVS" | xargs -n 1 | sort -u | xargs)
ilog "Unique storage devices: $STOR_DEVS"
if [ -z "$STOR_DEVS" ] ; then
report_failure_with_msg "No storage devices available."
fi
# Lock all devices so that udev doesn't trigger a kernel partition table
# rescan that removes and recreates all /dev nodes for partitions on those
# devices. Since udev events are asynchronous this could lead to a case
# where /dev/ links for existing partitions are briefly missing.
# Missing /dev links leads to command execution failures.
for dev in $STOR_DEVS; do
exec {fd}>$dev || report_failure_with_msg "Error creating file descriptor for $dev."
flock -n "$fd" || report_failure_with_msg "Can't get a lock on fd $fd of device $dev."
STOR_DEV_FDS="$STOR_DEV_FDS $fd"
ilog "Locked ${dev} fd:${fd}"
done
# Log info about system state at beginning of partitioning operation
for dev in $STOR_DEVS; do
ilog "Initial partition table for $dev is:"
# log "Initial partition table for $dev is:"
parted -s $dev unit mib print
# parted -s $dev unit mib print >> ${LOGFILE}
done
display_volume_info "before"
display_mount_info
# Consider removing since LAT already handles this failure mode
# Ensure specified device is not a USB drive
udevadm info --query=property --name=${INSTDEV} |grep -q '^ID_BUS=usb'
if [ $? -eq 0 ]; then
report_failure_with_msg "Specified installation ($INSTDEV) device is a USB drive."
fi
# Log the disk setup
ilog "Volume Groups : ${VOLUME_GROUPS} ; $STOR_DEV_FDS"
# update lvm.conf to prevent udev delays for locked devices
sed -i "s#obtain_device_list_from_udev = 1#obtain_device_list_from_udev = 0#" /etc/lvm/lvm.conf
# Deactivate existing volume groups to avoid Anaconda issues with pre-existing groups
vgs=( $(exec_no_fds "$STOR_DEV_FDS" "vgdisplay -C --noheadings -o vg_uuid 2>/dev/null") )
if [ ${#vgs[@]} -eq 0 ] ; then
ilog "No volume groups found"
else
for vg in ${vgs[@]}; do
ilog "Disable volume group ${vg}"
exec_no_fds "$STOR_DEV_FDS" "vgchange -an --select vg_uuid=${vg} 2>/dev/null" 5 0.5
[ $? -ne 0 ] && report_failure_with_msg "Failed to disable ${vg}."
done
for vg in ${vgs[@]}; do
vg_name=$(exec_no_fds "$STOR_DEV_FDS" "vgdisplay -C --noheadings --select vg_uuid=${vg} -o vg_name 2>/dev/null" | xargs)
pvs=( $(exec_no_fds "$STOR_DEV_FDS" "pvs --select vg_uuid=${vg} --noheadings -o pv_name 2>/dev/null" | grep -v unknown) )
if [ ${#pvs[@]} -ne 0 ] ; then
ilog "Remove logical volumes from ${vg_name} (${vg})"
exec_no_fds "$STOR_DEV_FDS" "lvremove --force --select vg_uuid=${vg} 2>/dev/null" 5 0.5 || wlog "WARNING: Failed to remove lvs on ${vg_name} (${vg})."
for pv in ${pvs[@]}; do
ilog "Remove physical volume ${pv} from ${vg_name} (${vg})"
exec_no_fds "$STOR_DEV_FDS" "pvremove --force --force --yes ${pv} 2>/dev/null" 5 0.5
[ $? -ne 0 ] && report_failure_with_msg "Failed to remove ${pv}."
done
fi
ilog "Force remove volume group ${vg_name} (${vg})"
exec_no_fds "$STOR_DEV_FDS" "vgremove --force --select vg_uuid=${vg} 2>/dev/null" 5 0.5
[ $? -ne 0 ] && report_failure_with_msg "Failed to remove ${vg_name} (${vg})."
done
fi
display_volume_info "after"
display_mount_info
ONLYUSE_HDD=""
part_type_guid_str="Partition GUID code"
part_type_name_str="Partition name"
part_type_size_str="Partition size"
part_type_first_str="First sector"
part_type_end_str="Last sector"
part_type_flags_str="Attribute flags"
# The /v1/upgrade/${hostname}/in_upgrade endpoint accepts any textual data
# as hostname and returns system-wide upgrade state
hostname="hostname"
if [ "$(curl -sf http://pxecontroller:6385/v1/upgrade/${hostname}/in_upgrade 2>/dev/null)" = "true" ]; then
# In an upgrade, only wipe the disk with the rootfs and boot partition
wlog "In upgrade, wiping only ${INSTDEV}"
WIPE_HDD=${INSTDEV}
ONLYUSE_HDD="$(basename ${INSTDEV})"
else
# Make a list of all the hard drives that are to be wiped.
# Never put the LAT install disk '${INSTDEV}' in that list.
WIPE_HDD=""
# Partition type OSD has a unique globally identifier
CEPH_OSD_GUID="4FBD7E29-9D25-41B8-AFD0-062C0CEFF05D"
CEPH_JOURNAL_GUID="45B0969E-9B03-4F30-B4C6-B4B80CEFF106"
# Check if we wipe OSDs
if [ "$(curl -sf http://pxecontroller:6385/v1/ihosts/wipe_osds 2>/dev/null)" = "true" ]; then
ilog "Wipe OSD data"
WIPE_CEPH_OSDS="true"
else
ilog "Skip Ceph OSD data wipe."
WIPE_CEPH_OSDS="false"
fi
for dev in $STOR_DEVS ; do
# TODO: Allowing the install dev 'in' results in a failure mode where
# every second install fails with the following error string
# and unrecoverable mount failure.
#
# Logs:
#
# Warning: The kernel is still using the old partition table.
# The new table will be used at the next reboot or after you
# run partprobe(8) or kpartx(8)
# and then
#
# Failure:
#
# mount: /sysroot: can't find LABEL=otaroot.
#
# Action: Find correct place to put partprobe
#
# Avoid wiping the install root disk
# [ ${dev} == ${INSTDEV} ] && continue
# Avoid wiping USB drives
udevadm info --query=property --name=$dev |grep -q '^ID_BUS=usb' && continue
# Avoid wiping ceph osds if sysinv tells us so
if [ ${WIPE_CEPH_OSDS} == "false" ]; then
wipe_dev="true"
exec_no_fds "$STOR_DEV_FDS" "pvs" | grep -q "$dev *ceph"
if [ $? -eq 0 ]; then
wlog "skip rook provisoned disk $dev"
continue
fi
part_numbers=( `parted -s $dev print | awk '$1 == "Number" {i=1; next}; i {print $1}'` )
# Scanning the partitions looking for CEPH OSDs and
# skipping any disk found with such partitions
for part_number in "${part_numbers[@]}"; do
sgdisk_part_info=$(sgdisk -i $part_number $dev)
part_type_guid=$(echo "$sgdisk_part_info" | grep "$part_type_guid_str" | awk '{print $4;}')
if [ "$part_type_guid" == $CEPH_OSD_GUID ]; then
wlog "OSD found on $dev, skipping wipe"
wipe_dev="false"
break
fi
exec_no_fds "$STOR_DEV_FDS" "pvs" | grep -q -e "${dev}${part_number} *ceph" -e "${dev}p${part_number} *ceph"
if [ $? -eq 0 ]; then
wlog "Rook OSD found on $dev$part_number, skip wipe"
wipe_dev="false"
break
fi
done
if [ "$wipe_dev" == "false" ]; then
continue
fi
fi
# Add device to the wipe list
devname=$(basename $dev)
if [ -e $dev -a "$ISO_DEV" != "../../$devname" -a "$USB_DEV" != "../../$devname" ]; then
ilog "Adding ${dev} to list of disks to be wiped"
if [ -n "$WIPE_HDD" ]; then
ilog "WIPE_HDD=$WIPE_HDD,$dev"
WIPE_HDD=$WIPE_HDD,$dev
else
ilog "WIPE_HDD=$dev"
WIPE_HDD=$dev
fi
fi
done
ilog "Not in upgrade"
fi
ilog "==========="
ilog "WIPE DISKs: ${WIPE_HDD}"
ilog "==========="
by_dev=${INSTDEV}
# TODO: Avoid this loop if the INSTDEV does not have by-path in its name
for f in /dev/disk/by-path/*; do
if [ "${f}" == "${INSTDEV}" ] ; then
by_dev=$(get_disk "${INSTDEV}")
break
fi
done
for dev in ${WIPE_HDD//,/ } ; do
ilog "Wiping $dev"
# Clear previous GPT tables or LVM data on each disk.
#
# Rule: Exclude the persistent 'Platform backup' partition.
# Note: Delete the first few bytes at the start and end of the partition.
# This is required with GPT partitions because they save partition
# info at both the start and the end of the block.
# Get a list of partitions for this disk
part_numbers=( $(parted -s $dev print | awk '$1 == "Number" {i=1; next}; i {print $1}') )
# For each '/dev/${dev}${part_number} apply wipe rules
for part_number in "${part_numbers[@]}"; do
sgdisk_part_info=$(sgdisk -i $part_number $dev)
part_name=$(echo "$sgdisk_part_info" | grep "$part_type_name_str" | awk '{print $3;}')
# special handling for the install device '${INSTDEV}'
if [ "${dev}" == "${by_dev}" ] ; then
# Skip over the bios, efi and boot partitions that got us here.
# LAT handles these partitions
case ${part_name} in
"'bios'")
ilog "skipping ${part_name} on ${dev}${part_number}"
continue
;;
"'otaefi'")
ilog "skipping ${part_name} on ${dev}${part_number}"
continue
;;
"'otaboot'")
ilog "skipping ${part_name} on ${dev}${part_number}"
continue
;;
"'otaboot_b'")
ilog "skipping ${part_name} on ${dev}${part_number}"
continue
;;
*)
dlog "wipe candidate ${part_name} on ${dev}${part_number}"
;;
esac
fi
# Deal with ssd's which have different partition labelling convention
part=$dev$part_number
case $part in
*"nvme"*)
part=${dev}p${part_number}
;;
esac
if [ "${controller}" = true ] ; then
# Skip if we already found a valid partition, look otherwise
[ ${BACKUP_PART_FOUND} -eq 1 ] && continue
ilog "Looking for platform-backup partition on $part from ... instdev=${INSTDEV} device=${by_dev}"
sgdisk_part_info=$(sgdisk -i $part_number $dev)
part_type_guid=$(echo "$sgdisk_part_info" | grep "$part_type_guid_str" | awk '{print $4;}')
dlog "Examining part_number=${part_number}, by_dev=${by_dev}, dev=${dev}, part_type_guid: ${part_type_guid}"
dlog "sgdisk_part_info: ${sgdisk_part_info}"
dlog "BACKUP_PART_GUID: ${BACKUP_PART_GUID}"
if [ "$dev" == "${by_dev}" -a "$part_type_guid" == $BACKUP_PART_GUID ] ; then
part_type_name=$(echo "$sgdisk_part_info" | grep "$part_type_name_str" | awk '{print $3,$4;}')
BACKUP_PART_NAME=${part_type_name:1:-1}
part_type_first=$(echo "$sgdisk_part_info" | grep "$part_type_first_str" | awk '{print $3;}')
BACKUP_PART_FIRST=${part_type_first}
part_type_end=$(echo "$sgdisk_part_info" | grep "$part_type_end_str" | awk '{print $3;}')
BACKUP_PART_END=${part_type_end}
part_type_size=$(echo "$sgdisk_part_info" | grep "$part_type_size_str" | awk '{print $3;}')
BACKUP_PART_SIZE=${part_type_size}
part_type_flags=$(echo "$sgdisk_part_info" | grep "$part_type_flags_str" | awk '{print $3;}')
BACKUP_PART_FLAGS=${part_type_flags}
ilog "Discovered persistent backup partition: ${part} [${BACKUP_PART_NAME}:${BACKUP_PART_FIRST}:${BACKUP_PART_END}:${BACKUP_PART_SIZE}:${part_type_guid}]"
# Only keep a backup partition that is in the expected location
# and contains a proper filesystem
if [ "${part_number}" == "${BACKUP_PART_NO}" ] ; then
part_fstype=$(exec_retry 5 0.5 "blkid -s TYPE -o value $part")
if [ "${part_fstype}" == "ext4" ]; then
BACKUP_PART_CURRENT_SIZE=$(parted -s ${part} unit MiB print | grep ${part} | awk '{print $3}' | sed 's/[^C0-9]*//g')
BACKUP_PART_FOUND=1
ilog "Discovered persistent backup partition, ${part} [${BACKUP_PART_CURRENT_SIZE} MiB], is in the expected location and is formatted correctly. Maintaining..."
continue
else
ilog "Discovered persistent backup partition, ${part}, has a missing 'ext4' filesystem . Recreating..."
fi
else
# Make sure we only recreate the backup partition on systems that are
# known to be invalid. Detect a potential switch in BIOS vs. UEFI and
# exit with an appropriate message.
ilog "Discovered persistent backup partition, ${part}, is in an unexpected location. Expected: ${BACKUP_PART}."
if [ "$USE_UEFI_PARTITIONS" = 0 ] ; then
# BIOS boot...
if [ "${part_number}" == "${BACKUP_PART_UEFI}" ] ; then
# Found a UEFI location for platform backup
report_failure_with_msg "BIOS booted system has a persistent backup partition in a UEFI expected location. Wipe disks or boot system in UEFI mode."
else
ilog "BIOS booted system has an invalid installation. Recreating "
fi
else
# UEFI boot...
if [ "${part_number}" == "${BACKUP_PART_BIOS}" ] ; then
# Found a BIOS location for platform backup
report_failure_with_msg "UEFI booted system has a persistent backup partition in a BIOS expected location. Wipe disks or boot system in BIOS mode."
else
ilog "UEFI booted system has an invalid installation. Recreating "
fi
fi
fi
fi
fi
if [ $WIPE_CEPH_OSDS == "true" -a "$part_type_guid" == $CEPH_JOURNAL_GUID ]; then
# Journal partitions require additional wiping. Based on the ceph-manage-journal.py
# script in the integ repo (at the ceph/ceph/files/ceph-manage-journal.py location)
# wiping 100MB of data at the beginning of the partition should be enough. We also
# wipe 100MB at the end, just to be safe.
ilog "Wiping Ceph ${part_name} on ${part} start and end with dd"
dd if=/dev/zero of=$part bs=1M count=100 2>/dev/null
dd if=/dev/zero of=$part bs=1M count=100 seek=$(( `blockdev --getsz $part` / (1024 * 2) - 100 )) 2>/dev/null
else
ilog "Wiping ${part_name} on ${part} start and end with dd"
dd if=/dev/zero of=$part bs=512 count=34 2>/dev/null
dd if=/dev/zero of=$part bs=512 count=34 seek=$((`blockdev --getsz $part` - 34)) 2>/dev/null
fi
done
if [ ${BACKUP_PART_FOUND} -eq 0 -o "${dev}" != "${by_dev}" ]; then
ilog "Creating disk label for $dev"
parted -s $dev mktable gpt
ilog "... done"
fi
done
ilog "Ensure any LAT installer root/boot partitions are zapped/wiped"
for oldrootlabel in otaroot otaroot_1 otaroot_b otaroot_b_1 ; do
oldrootpart=$(blkid --label $oldrootlabel)
[ -z "$oldrootpart" ] && continue
oldinstdev=/dev/$(lsblk $oldrootpart -n -o pkname)
ilog "... destroying ${oldrootpart} on ${oldinstdev}"
# sgdisk - Command-line GUID partition table (GPT) manipulator
# Zap the entire partition
ilog "... zapping ${oldinstdev}"
sgdisk -Zo ${oldinstdev}
# partprobe - inform the OS of partition table changes
# root@(none):/# partprobe /dev/sda -s
# /dev/sda: gpt partitions 1 2 3 4 5 6
ilog "... probing ${oldinstdev}"
partprobe ${oldinstdev}
# wipefs - wipe a signature from a device
ilog "... wiping ${oldinstdev}"
wipefs --all --backup ${oldinstdev}
done
# Override installer variable to not prompt for erasing the disk
export INSTW=0
ilog "Setting up initial IP address for ostree pull"
parse_miniboot_network_params
mgmt_dev=${BOOTPARAM_IFNAME}
mgmt_vlan=${BOOTPARAM_VLAN}
mgmt_address_family=${BOOTPARAM_MGMT_ADDRESS_FAMILY}
if [ $mgmt_vlan -eq 0 ] ; then
if [ "$mgmt_address_family" = "inet" ]; then
ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_dev}"
ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_dev}
else
ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_dev}"
ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_dev}
fi
ilog "ip ${BOOTPARAM_IP_VER} link set dev ${mgmt_dev} up"
ip ${BOOTPARAM_IP_VER} link set dev ${mgmt_dev} up
ilog "ip ${BOOTPARAM_IP_VER} route add default ${BOOTPARAM_ROUTE_OPTIONS} dev ${mgmt_dev} ${BOOTPARAM_METRIC}"
ip ${BOOTPARAM_IP_VER} route add default ${BOOTPARAM_ROUTE_OPTIONS} dev ${mgmt_dev} ${BOOTPARAM_METRIC}
wait_for_interface ${mgmt_dev} 60
ilog "ip addr:"
ip addr show
ilog "ip route:"
ip ${BOOTPARAM_IP_VER} route show
else
mgmt_iface=vlan${mgmt_vlan}
ilog "mgmt_dev=${mgmt_dev}"
ilog "mgmt_iface=vlan${mgmt_vlan}"
ilog "mgmt_address_family: ${mgmt_address_family}"
ilog "ip ${BOOTPARAM_IP_VER} link add link ${mgmt_dev} name $mgmt_iface type vlan id ${mgmt_vlan}"
ip ${BOOTPARAM_IP_VER} link add link ${mgmt_dev} name $mgmt_iface type vlan id ${mgmt_vlan}
if [ "${mgmt_address_family}" = "inet" ]; then
ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_iface}"
ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN} dev ${mgmt_iface}
else
ilog "ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_iface}"
ip ${BOOTPARAM_IP_VER} address add ${BOOTPARAM_IP_ADDR} dev ${mgmt_iface}
fi
ilog "ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_dev}"
ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_dev}
sleep 15
ilog "ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_iface}"
ip ${BOOTPARAM_IP_VER} link set up dev ${mgmt_iface}
ilog "Wait 10s to settle interface..."
sleep 10
ilog "ip ${BOOTPARAM_IP_VER} route add default ${BOOTPARAM_ROUTE_OPTIONS} dev ${mgmt_dev} ${BOOTPARAM_METRIC}"
ip ${BOOTPARAM_IP_VER} route add default ${BOOTPARAM_ROUTE_OPTIONS} dev ${mgmt_dev} ${BOOTPARAM_METRIC}
ilog "ip ${BOOTPARAM_IP_VER} addr:"
ip ${BOOTPARAM_IP_VER} addr show
ilog "ip ${BOOTPARAM_IP_VER} route:"
ip ${BOOTPARAM_IP_VER} route show
fi
# get the nameserver
local dns="none"
for e in \${dns}; do
echo "nameserver \${e}" > /etc/resolv.conf
done
true
%end
###########################################################################
%part --interpreter=/bin/bash
HOOK_LABEL=" part"
. /tmp/lat/ks_functions.sh
ilog "*****************************************"
ilog "*** Partition - Partition Disks ***"
ilog "*****************************************"
dev=$(get_disk "${INSTDEV}")
###########################################################
# From pre_disk_controller.cfg
###########################################################
function check_partitioning_status() {
start_sec=$(($end_sec+1))
part_no=$((part_no+1))
if [ $start_sec -gt $last ] ; then
report_failure_with_msg "Disk is not big enough for requested layout (start_sec: $start_sec, last: $last)"
fi
}
if [ "$BIOSPLUSEFI" = 1 ] ; then
ilog "BIOSPLUSEFI=1 configuration is requested"
if [ "${controller}" = true -a "$USE_UEFI_PARTITIONS" = 1 ] ; then
ilog "WARNING: UEFI booted and installed controllers will NOT have a BIOS MBR partition due to partitioning patterns established in previous releases."
fi
fi
MIB_BYTES=$((1024*1024))
# Start common partitioning regardless of personality
sgdisk_parts=""
# Get the logical sector size used for determining partition boundaries
LOGICAL_SECTOR_SZ=`lsblk -n ${dev} -o LOG-SEC -d`
# Zap the GPT/MBR information
sgdisk -Z ${dev}
# Get the first aligned sector
first=`sgdisk -F ${dev} | grep -v Creating`
# Get the last aligned sector
export last=$(sgdisk -E ${dev} 2>/dev/null |grep -v Creating)
ilog "Allocate host partitions on ${dev} with first sector: $first and last sector: $last"
# Maintain BIOS partition mappings from previous releases
start_sec=$first
part_no=1
if [ "$USE_UEFI_PARTITIONS" = 0 -o "${controller}" = false ] ; then
# 1MB size for BIOS boot partition
BIOSSZ=1
end_sec=$(($start_sec+(${BIOSSZ}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:bios -t $part_no:EF02"
check_partitioning_status
fi
if [ "${controller}" = true ] ; then
if [ "${aio}" = true ] ; then
get_aio_controller_provisioning_sizes
ilog "AIO Controller: MINIMIZING root disk space allocation"
else
get_std_controller_provisioning_sizes
ilog "STD Controller: MAXIMIZING root disk space allocation"
fi
# Only controllers have a persistent backup partition
# Use current partition size if it has been detected
if [ ${BACKUP_PART_CURRENT_SIZE} -gt 0 ]; then
BACKUP_SIZE=${BACKUP_PART_CURRENT_SIZE}
else
BACKUP_SIZE=${BACKUP_DEFAULT_PERSISTENT_SIZE}
fi
export BACKUP_SIZE
# Check for a bootline override and allocate platform backup partition
if [ -z "$persistent_size" ]; then
# Default backup partition size in MiB
ilog "Platform Backup persistent size not on command line ; defaulting to ${BACKUP_SIZE}"
else
if [ ${persistent_size} -lt ${BACKUP_SIZE} ] ; then
report_failure_with_msg "Cannot set persistent_size smaller than ${BACKUP_SIZE} MiB"
else
ilog "Using Platform Backup persistent size from boot command: ${persistent_size}"
BACKUP_SIZE=${persistent_size}
fi
fi
backup_part_extension_required=0
if [ ${BACKUP_PART_CURRENT_SIZE} -gt 0 ]; then
# Reconcile current backup partition size against BACKUP_SIZE
if [ ${BACKUP_SIZE} -eq ${BACKUP_PART_CURRENT_SIZE} ] ; then
ilog "Platform Backup partition size is unchanged: ${BACKUP_SIZE} MiB."
elif [ ${BACKUP_SIZE} -gt ${BACKUP_PART_CURRENT_SIZE} ] ; then
# We need to extend the existing partition - this is done after the partitions are recreated
backup_part_extension_required=1
else
# Do not allow shrinking of backup partition
report_failure_with_msg "Cannot shrink platform backup smaller than existing ${BACKUP_PART_CURRENT_SIZE} MiB"
fi
fi
ilog "Platform Backup partition size: ${BACKUP_SIZE}"
if [ ${BACKUP_PART_FOUND} -eq 0 ] ; then
ilog "Platform Backup partition not detected: CREATING"
else
ilog "Platform Backup Partition was detected: PERSISTING"
fi
dlog "BACKUP_SIZE=${BACKUP_SIZE} after persistent_size=${persistent_size}, backup_part_extension_required=${backup_part_extension_required}"
end_sec=$(($start_sec+(${BACKUP_SIZE}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:${BACKUP_PART_LABEL} -t $part_no:${BACKUP_PART_GUID}"
check_partitioning_status
elif [ "${worker}" = true ] ; then
ilog "Setting up platform_pv partition sizes for worker node"
get_worker_provisioning_sizes
elif [ "${storage}" = true ] ; then
ilog "Setting up platform_pv partition sizes for storage node"
get_storage_provisioning_sizes
fi
ilog "PART_SZ_EFI : ${PART_SZ_EFI}"
ilog "PART_SZ_BOOT : ${PART_SZ_BOOT}"
ilog "PART_SZ_ROOT : ${PART_SZ_ROOT}"
# 300 MiB size for EFI boot partition to align with previous releases
end_sec=$(($start_sec+(${PART_SZ_EFI}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaefi -t $part_no:EF00"
check_partitioning_status
# Boot/Root OSTree Partition A (Note: OSTree Partition B not used)
if [ "${PART_SZ_BOOT}" != 0 ] ; then
end_sec=$(($start_sec+(${PART_SZ_BOOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaboot"
check_partitioning_status
fi
if [ "${PART_SZ_ROOT}" != 0 ] ; then
if [ "$INSTAB" = 0 -a "${INSTFLUX}" = 0 ] ; then
if [ "$VSZ" = 0 ] ; then
report_failure_with_msg "Installation with VSZ=0 is not supported."
else
end_sec=$(($start_sec+(${PART_SZ_ROOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
fi
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaroot"
else
end_sec=$(($start_sec+(${PART_SZ_ROOT}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:otaroot"
fi
check_partitioning_status
fi
# Flux Partition
if [ "${LV_SZ_VAR}" = 0 -a "${INSTFLUX}" = 1 ] ; then
if [ "$VSZ" = 0 ] ; then
report_failure_with_msg "Installation with VSZ=0 is not supported."
else
end_sec=$(($start_sec+(${VSZ}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
fi
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:fluxdata"
check_partitioning_status
fi
# Allocate platform pv
if [ "$MINIMUM_PLATFORM_PV_SIZE" = 0 ] ; then
ilog "platform_pv partition - using all remaining disk space"
end_sec=$last
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:platform_pv -t $part_no:8E00"
else
ilog "platform_pv partition - requesting ${MINIMUM_PLATFORM_PV_SIZE} MiB"
end_sec=$(($start_sec+(${MINIMUM_PLATFORM_PV_SIZE}*${MIB_BYTES}/${LOGICAL_SECTOR_SZ})-1))
sgdisk_parts="$sgdisk_parts -n $part_no:$start_sec:$end_sec -c $part_no:platform_pv -t $part_no:8E00"
check_partitioning_status
fi
STOR_DEVS=$(echo "$STOR_DEVS" | xargs -n 1 | sort -u | xargs)
[ -z "$STOR_DEVS" ] && report_failure_with_msg "No storage devices available."
ilog "STOR_DEV_FDS Updated ; $STOR_DEV_FDS"
# CREATE PARTITIONS
dlog "Requesting ${dev} Partition Table: ${a}"
dlog "Executing: sgdisk ${sgdisk_parts} -p ${dev}"
sgdisk $sgdisk_parts -p ${dev}
rc=$?
[ ${rc} -ne 0 ] && report_failure_with_msg "sgdisk failed to create partitions: ${a} [rc=${rc}]"
if [ "${backup_part_extension_required}" -ne 0 ]; then
# The backup partition has been increased via persistent_size.
# Extend the partition and resize the FS
wlog "Platform Backup partition: resizing ${BACKUP_PART} from ${BACKUP_PART_CURRENT_SIZE}MiB to ${BACKUP_SIZE}MiB"
e2fsck -p -f ${BACKUP_PART}
rc=$?
[ ${rc} -ne 0 ] && report_failure_with_msg "e2fsck failed on platform backup partition [rc=${rc}]"
resize2fs -f ${BACKUP_PART}
rc=$?
[ ${rc} -ne 0 ] && report_failure_with_msg "Failed to resize ext4 fs of platform backup partition [rc=${rc}]"
fi
true
%end
###########################################################################
%mkfs --interpreter=/bin/bash
HOOK_LABEL="mkfs"
. /tmp/lat/ks_functions.sh
ilog "***************************************************"
ilog "*** Mkfs - Format Partitions & LVM Volumes ***"
ilog "***************************************************"
#######################################################
# From pre_disk_aio
######################################################
vg="volume group"
lv="logical volume"
dev=$(get_disk "${INSTDEV}")
if [ "${controller}" = true ] ; then
if [ "${aio}" = true ] ; then
get_aio_controller_provisioning_sizes
else
get_std_controller_provisioning_sizes
fi
else
report_failure_with_msg "Unsupported install type: only Standard or All-in-one is supported"
fi
fs_dev=$dev
case ${fs_dev} in
*"nvme"*)
fs_dev=${fs_dev}p
;;
esac
# Maintain BIOS partition mappings from previous releases
part_no=1
if [ "$USE_UEFI_PARTITIONS" = 0 -o "${controller}" = false ] ; then
# No formating for the BIOS boot partition
part_no=$((part_no+1))
fi
if [ "${controller}" = true ] ; then
ilog "BACKUP_SIZE : ${BACKUP_SIZE}"
ilog "BACKUP_PART : ${BACKUP_PART}"
ilog "BACKUP_PART_NO : ${BACKUP_PART_NO}"
ilog "BACKUP_PART_LABEL : ${BACKUP_PART_LABEL}"
ilog "BACKUP_PART_GUID : ${BACKUP_PART_GUID}"
# Only init Platform Backup partition filesystem if the partition was just created
if [ ${BACKUP_PART_FOUND} -eq 0 ] ; then
# Sanity check
[ "${fs_dev}${part_no}" != "${BACKUP_PART}" ] && report_failure_with_msg "Abort creating platform backup filesystem, unexpected location: ${fs_dev}${part_no}"
ilog "Platform Backup Partition was CREATED. Initialize filesystem on ${BACKUP_PART}"
mkfs.ext4 -F -L ${BACKUP_PART_LABEL} ${BACKUP_PART}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed Platform Backup partition filesystem init ${BACKUP_PART}"
else
# Preserving the contents of the backup partition, but make sure it's labeled correctly
e2label ${BACKUP_PART} ${BACKUP_PART_LABEL}
fi
part_no=$((part_no+1))
fi
# Maintain UEFI partition mappings from previous releases
mkfs.vfat -n otaefi ${fs_dev}${part_no}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed UEFI filesystem init: ${fs_dev}${part_no}, rc=${?}"
part_no=$((part_no+1))
# Boot/Root OSTree Partition A (Note: OSTree Partition B not used)
if [ "${PART_SZ_BOOT}" != 0 ] ; then
mkfs.ext4 -F -L otaboot ${fs_dev}${part_no}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed Boot filesystem init: ${fs_dev}${part_no}, rc=${?}"
part_no=$((part_no+1))
fi
if [ "${PART_SZ_ROOT}" != 0 ] ; then
mkfs.ext4 -F -L otaroot ${fs_dev}${part_no}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed Root filesystem init: ${fs_dev}${part_no}, rc=${?}"
part_no=$((part_no+1))
fi
# Flux Partition
if [ "${LV_SZ_VAR}" = 0 -a "${INSTFLUX}" = 1 ] ; then
mkfs.ext4 -F -L fluxdata ${fs_dev}${part_no}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed Fluxdata (/var) filesystem init: ${fs_dev}${part_no}, rc=${?}"
part_no=$((part_no+1))
fi
# Log important LVM config settings
log_lvm_conf "Installer Initial" /etc/lvm/lvm.conf
# Create Volume Group
pv_part=${fs_dev}${part_no}
ilog "Install disk: ${INSTDEV}"
ilog "Current disk: ${dev} ; current partition index:$part_no"
ilog "MINIMUM_PLATFORM_PV_SIZE (${pv_part}): ${MINIMUM_PLATFORM_PV_SIZE} MB (0 = all avail space)"
ilog "LV_SZ_LOG (cgts--vg-log--lv size): ${LV_SZ_LOG} MB"
ilog "LV_SZ_ROOT (cgts--vg-root--lv) : ${LV_SZ_ROOT} MB"
ilog "LV_SZ_SCRATCH (cgts--vg-scratch--lv) : ${LV_SZ_SCRATCH} MB"
ilog "LV_SZ_VAR (cgts--vg-var--lv) : ${LV_SZ_VAR} MB"
ilog "Wipe any previous signatures from the platform physical volume ${pv_part}"
wipefs -a ${pv_part}
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to wipe signatures from ${pv_part}, rc=${?}"
ilog "Create ${vg} 'cgts-vg' ${pv_part} ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "vgcreate -y --force cgts-vg ${pv_part} 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${vg} 'cgts-vg' ${pv_part}"
if [ "${LV_SZ_ROOT}" != 0 ] ; then
# Create and Init the '/' logical volume
ilog "Create ${lv} 'root-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n root-lv --size ${LV_SZ_ROOT}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'root-lv'"
ilog "InitFs ${lv} 'root-lv'"
mkfs.ext4 -F /dev/cgts-vg/root-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'root-lv'"
fi
if [ "${LV_SZ_VAR}" != 0 ] ; then
# Create and Init the '/' logical volume
ilog "Create ${lv} 'var-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n var-lv --size ${LV_SZ_ROOT}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'root-lv'"
ilog "InitFs ${lv} 'var-lv'"
mkfs.ext4 -F /dev/cgts-vg/var-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'root-lv'"
fi
# Create and Init the '/var/log' logical volume
ilog "Create ${lv} 'log-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n log-lv --size ${LV_SZ_LOG}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'log-lv'"
ilog "InitFs ${lv} 'log-lv'"
mkfs.ext4 -F /dev/cgts-vg/log-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'log-lv'"
# Create and init the '/scratch' logical volume
ilog "Create ${lv} 'scratch-lv' ; $STOR_DEV_FDS"
exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n scratch-lv --size ${LV_SZ_SCRATCH}MB cgts-vg 2>/dev/null" 5 0.5
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'scratch-lv'"
ilog "InitFs ${lv} 'scratch-lv'"
mkfs.ext4 -F /dev/cgts-vg/scratch-lv
[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'scratch-lv'"
#######################################################################
# From post_lvm_on_rootfs.cfg (all hosts)
#######################################################################
# uncomment the global_filter line in lvm.conf
perl -0777 -i.bak -pe 's:(# This configuration option has an automatic default value\.\n)\t# global_filter:$1 global_filter:m' /etc/lvm/lvm.conf
perl -0777 -i -pe 's:(# Example\n)\t# preferred_names:$1 preferred_names:m' /etc/lvm/lvm.conf
# Get the LVM disk partition and add it to the lvm.conf file
export LV_ROOTDISK=$(exec_no_fds "$STOR_DEV_FDS" "pvdisplay --select 'vg_name=cgts-vg' -C -o pv_name --noheadings" | xargs)
[ -z ${LV_ROOTDISK} ] && report_failure_with_msg "Failed to identify logical volume rootdisk via pvdisplay"
# Edit the LVM config so LVM only looks for LVs on ${LV_ROOTDISK}
ilog "Edit the LVM config so LVM only looks for LVs on the root disk"
sed -i "s#^\( *\)global_filter = \[.*#\1global_filter = [ \"a|${LV_ROOTDISK}|\", \"r|.*|\" ]#" /etc/lvm/lvm.conf
# Log important LVM config settings
log_lvm_conf "Installer Updated" /etc/lvm/lvm.conf
#####################################################################
# From pre_disk_setup_tail.cfg
#####################################################################
# Close all FDs and wait for udev to reshuffle all partitions.
ilog "Releasing storage device locks and FDs."
for fd in $STOR_DEV_FDS
do
flock -u "$fd"
exec {fd}>&-
done
sleep 2
udevadm settle --timeout=300 || report_failure_with_msg "udevadm settle failed"
#lsblk -o name,mountpoint,label,size,uuid
# Rescan LVM cache to avoid warnings for VGs that were recreated.
pvscan --cache 2>/dev/null
# Stage the ostree_repo in /sysroot for network installations
# of controller nodes. Doing so avoids a double ostree pull of
# the huge ostree_repo over the network.
if is_usb_install -eq 0 ; then
ilog "USB Install"
else
ilog "Network Install"
##################################################################
#
# System node installs of worker and storage nodes are installed
# over the network rather than from a staged archive.
# This is because these node types do not have/need a local feed.
#
##################################################################
if [ "${controller}" = true ] ; then
ilog "Controller Install"
##############################################################
#
# Controller node network installs pull the ostree_repo from
# the pxeboot server's feed directory in 'archive' mode into
# /sysroot as a local staging location. In this case LAT's
# INSTL (install) variable is updated to install from that
# local stage.
#
# This is done to avoid a second (double) ostree_repo pull
# over the network that would otherwise be needed to populate
# the controller's feed directory.
#
# This staged ostree_repo archive is later moved to the
# controller's feed directory to be used for future installs
# of other system nodes from this controller.
#
##############################################################
ilog "OSTREE_ROOT_DEVICE: ${OSTREE_ROOT_DEVICE}"
ilog "OSTREE_VAR_DEVICE : ${OSTREE_VAR_DEVICE}"
PHYS_SYSROOT="/sysroot"
mkdir -p ${PHYS_SYSROOT}
mount -o rw,noatime "${OSTREE_ROOT_DEVICE}" "${PHYS_SYSROOT}" || elog "Error mounting ${OSTREE_ROOT_DEVICE}"
repo="${PHYS_SYSROOT}/var/www/pages/feed/rel-xxxPLATFORM_RELEASExxx/ostree_repo"
mkdir -p "${repo}"
# If we have already prestaged ostree_repo in /opt/platform-backup,
# then we should use that repo instead of downloading off of the system controller.
backup_device=/dev/disk/by-partlabel/platform_backup
backup_mount=/tmp/platform-backup
ilog "Temporary backup mount is ${backup_mount}"
mkdir -p "${backup_mount}"
mount "${backup_device}" "${backup_mount}" 2>/dev/null
# If ostree_repo is found at the mounted backup directory,
# then set the ostree url to its location.
remote_insturl=
if [ -e ${backup_mount}/ostree_repo ]; then
# Preserve remote_insturl for use in 2nd ostree pull below
remote_insturl=${insturl}
insturl="file:///${backup_mount}/ostree_repo"
ilog "Setting insturl to ${insturl} to use prestaged ostree_repo"
fi
# Tell LAT to install from this local stage
# i.e. override where LAT installs from.
export instl=${repo}
export INSTL=${instl}
ostree --repo=${repo} init --mode=archive
if [ "${insturl}" = "file://NOT_SET" ] ; then
ilog "ostree_repo archive pull from file:///instboot/ostree_repo"
ostree --repo=${repo} remote add ${instbr} file:///instboot/ostree_repo
else
ilog "ostree_repo archive pull from ${insturl}"
ostree --repo=${repo} remote add ${instbr} ${insturl}
fi
# Check for noverifyssl in boot arguments.
# Note: even if noverifyssl is not set, we still don't have proper support
# for SSL certificates (which would require configuring cert paths here).
if grep -q noverifyssl /proc/cmdline 2>/dev/null; then
ilog "Configuring ostree for unverified SSL"
ostree config --repo=${repo} set "remote \"${instbr}\"".tls-permissive true
fi
ilog "Executing: ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}"
ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}
rc=$?
if [ $rc -ne 0 ]; then
report_failure_with_msg "ostree pull failed, rc=$rc"
fi
if [ -n "${remote_insturl}" ]; then
# In this case, we've initialized our ostree repo from local disk
# store - either via prestaging or due to installing from ISO.
# We now perform an extra ostree pull from the system controller
# in order to pick up any patch commits.
ilog "ostree_repo archive pull from ${remote_insturl} for patch commits"
# Set feed ostree remote "starlingx" to point to active controller's feed ostree repo
ilog "Replacing ostree feed remote with: ${remote_insturl} ${instbr}"
ostree --repo=${repo} remote delete ${instbr}
ostree --repo=${repo} remote add ${instbr} ${remote_insturl} ${instbr}
if grep -q noverifyssl /proc/cmdline 2>/dev/null; then
ilog "Configuring ostree for unverified SSL"
ostree config --repo=${repo} set "remote \"${instbr}\"".tls-permissive true
fi
ilog "Executing ostree pull from ${remote_insturl}:"
ilog "ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}"
ostree --repo=${repo} pull --depth=-1 --mirror ${instbr}:${instbr}
rc=$?
if [ $rc -ne 0 ]; then
report_failure_with_msg "ostree pull failed, rc=$rc"
fi
fi
ilog "ostree log for ${repo}, branch=${instbr}:"
ostree --repo=${repo} log ${instbr}
umount ${backup_mount}
umount ${PHYS_SYSROOT}
fi
fi
# Important: To align with installer expectations of where otaefi will reside,
# reset the value of p1
if [ "${controller}" = true ] ; then
if [ "$USE_UEFI_PARTITIONS" = 0 ] ; then
# BIOS firmware execution
# Number Start (sector) End (sector) Size Code Name
# 1 2048 4095 1024.0 KiB EF02 bios
# 2 4096 61444095 29.3 GiB FFFF platform_backup
# 3 61444096 62058495 300.0 MiB EF00 otaefi
#
p1=3
else
# UEFI firmware execution
# Number Start (sector) End (sector) Size Code Name
# 1 2048 61442047 29.3 GiB FFFF platform_backup
# 2 61442048 62056447 300.0 MiB EF00 otaefi
p1=2
# LAT installer will attempt to write the legacy BIOS grub information
# after exiting from this hook. Skip it, in this case, as we don't have
# a BIOS boot partition
export BIOSPLUSEFI=0
fi
elif [ "${worker}" = true -o "${storage}" = true ] ; then
# UEFI and BIOS firmware execution
# Number Start (sector) End (sector) Size Code Name
# 1 2048 4095 1024.0 KiB EF02 bios
# 2 4096 618495 300.0 MiB EF00 otaefi
p1=2
fi
true
%end
###########################################################################
%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "**** Post - Add user/groups **"
ilog "*********************************************************"
# Set password for root to 'root'
usermod -p '$6$hEv/K.fPeg/$ezIWhJPrMG3WtdEwqQRdyBwdYmPZkqW2PONFAcDd6TqWliYc9dHAwW4MFTlLanVH3/clE0/34FheDMpbAqZVG.' root
# Remove admin user whether it exists or not
deluser admin || true
# Create the sysadmin user
useradd sysadmin -m --shell /bin/bash -G sudo --password 4SuW8cnXFyxsk
chage -d 0 sysadmin
# add 'nobody' group
groupadd nobody
# Reload /etc/group- to make systemd-sysusers.service happy
/usr/sbin/grpconv || report_failure_with_msg "Failed to convert from shadow passwords and groups"
%end
%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "*** Post - Traits & Platform Config File update ***"
ilog "*********************************************************"
# Set node traits' state
[ "${controller}" = true ] && ilog "Controller Function"
[ "${storage}" = true ] && ilog "Storage Function"
[ "${worker}" = true ] && ilog "Worker Function"
[ "${lowlatency}" = true ] && ilog "Low Latency Function"
[ "${controller}" = true -a ${worker} = true ] && aio=true
# Parse traits to nodetype, subfunction and system_type
# -----------------------------------------------------
# Set nodetype from traits
if [ "${controller}" = true ] ; then
nodetype=${TRAIT__CONTROLLER}
elif [ "${storage}" = true ] ; then
nodetype=${TRAIT__STORAGE}
elif [ "${worker}" = true ] ; then
nodetype=${TRAIT__WORKER}
fi
ilog "nodetype=${nodetype}"
# Set system type and subfunction
subfunction=""
system_type=""
[ "${controller}" = true -a "${worker}" = true ] && aio=true
if [ "${aio}" = true ] ; then
ilog "${SYSTEM_TYPE__AIO} System"
system_type="${SYSTEM_TYPE__AIO}"
subfunction="${SUBFUNCTION__AIO}"
if [ "${lowlatency}" = true ] ; then
ilog "Setting aio lowlatency"
ln -s /usr/share/systemd-presets/lowlatency.preset /etc/systemd/system-preset/10-aio.preset
else
ln -s /usr/share/systemd-presets/aio.preset /etc/systemd/system-preset/10-aio.preset
fi
else
ilog "${SYSTEM_TYPE__STANDARD} System"
system_type="${SYSTEM_TYPE__STANDARD}"
if [ "${worker}" = true ] ; then
subfunction=${SUBFUNCTION__WORKER}
if [ "${lowlatency}" = true ] ; then
ilog "Setting ${SUBFUNCTION__WORKER} lowlatency"
ln -s /usr/share/systemd-presets/worker-lowlatency.preset /etc/systemd/system-preset/10-${SUBFUNCTION__WORKER}.preset
else
ln -s /usr/share/systemd-presets/worker.preset /etc/systemd/system-preset/10-${SUBFUNCTION__WORKER}.preset
fi
elif [ "${storage}" = true ] ; then
subfunction=${SUBFUNCTION__STORAGE}
ilog "Setting ${SUBFUNCTION__STORAGE} preset"
ln -s /usr/share/systemd-presets/storage.preset /etc/systemd/system-preset/10-${SUBFUNCTION__STORAGE}.preset
else
subfunction=${SUBFUNCTION__CONTROLLER}
ilog "Setting ${SUBFUNCTION__CONTROLLER} preset"
ln -s /usr/share/systemd-presets/controller.preset /etc/systemd/system-preset/10-${SUBFUNCTION__CONTROLLER}.preset
fi
fi
if [ "${lowlatency}" = true ] ; then
subfunction="${subfunction},${TRAIT__LOWLATENCY}"
fi
ilog "subfunction=${subfunction}"
ilog "system_type=${system_type}"
#################################################################
# From post_platform_conf_controller.cfg
# From post_platform_conf_aio.cfg
# From post_platform_conf_aio_lowlatency.cfg
#################################################################
ilog "create platform.conf and set personality traits"
[ ! -d "/etc/platform" ] && mkdir -p -m 0775 /etc/platform
cat <<EOF > ${PLATFORM_CONF}
nodetype=${nodetype}
subfunction=${subfunction}
system_type=${system_type}
EOF
ilog "Create systemd presets and set personality traits"
systemctl daemon-reload
systemctl --preset-mode=full preset-all
##############################################################
# From post_pxeboot_controller
# From post_net_common.cfg
# ############################################################
# Set http port
# Persist the default http port number to platform configuration.
# This will get overwritten when by manifest during sw configuration phase.
if [[ "${insturl}" == *"http"* ]] ; then
http_port=$(echo $(cat /proc/cmdline |xargs -n1 echo |grep '^insturl=' | sed -r 's#^[^/]*://[^/]*:([0-9]*)/.*#\1#'))
else
http_port=8080
fi
update_platform_conf "http_port=${http_port}"
#############################################################
# From post_common.cfg (all hosts)
#############################################################
rm /etc/hostname
# TODO: is this needed with LAT ??
# If using a serial install make sure to add a getty on the tty1
conarg=`cat /proc/cmdline |xargs -n1 echo |grep console= |grep ttyS`
if [ -n "$conarg" ] ; then
echo "1:2345:respawn:/sbin/mingetty tty1" >> /etc/inittab
fi
blkid >> ${LOGFILE}
# TODO: See if other post_common.cfg content is needed
true
%end
###########################################################################
%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "*************************************"
ilog "*** Post - Set Kernel Args ***"
ilog "*************************************"
###########################################################
# From post_kernel_controller.cfg
# From post_kernel_aio_worker.cfg
###########################################################
. /etc/platform/platform.conf
# Prepare the disk boot kernel comand line
# ----------------------------------------
KERN_OPTS="${KERNEL_PARAMS}"
ilog "Building up KERN_OPTS: ${KERN_OPTS}"
function add_kernel_option()
{
option="${1}"
ilog "... adding: ${option}"
# avoid adding leading space on first option
if [ "${KERN_OPTS}" = "" ] ; then
KERN_OPTS="${option}"
else
KERN_OPTS="${KERN_OPTS} ${option}"
fi
}
# If the installer asked us to use security related kernel params, use
# them in the grub line as well (until they can be configured via puppet)
security_feature=""
# Handle security options
# TODO: Create a list and loop over it
security_options="nopti nospectre_v2 nospectre_v1"
for o in ${security_options}
do
grep -q ${o} /proc/cmdline
if [ $? -eq 0 ]; then
add_kernel_option "${o}"
if [ "${security_feature}" = "" ] ; then
security_feature="${o}"
else
security_feature="${security_feature} ${o}"
fi
fi
done
[ "${KERN_OPTS}" != "" ] && ilog "Learned kernel params: ${KERN_OPTS}"
ilog "Adding kernel options"
if [ "${aio}" = true -o "${worker}" = true ] ; then
if [ -e /etc/init.d/cpumap_functions.sh ] ; then
# Update grub with custom kernel bootargs
source /etc/init.d/cpumap_functions.sh
n_cpus=$(cat /proc/cpuinfo 2>/dev/null | \
awk '/^[pP]rocessor/ { n +=1 } END { print (n>0) ? n : 1}')
ilog "cpumap: n_cpus:${n_cpus}"
n_numa=$(ls -d /sys/devices/system/node/node* 2>/dev/null | wc -l)
ilog "cpumap: n_numa:${n_numa}"
KERN_OPTS="${KERN_OPTS} iommu=pt"
KERN_OPTS="${KERN_OPTS} hugepagesz=2M hugepages=0 default_hugepagesz=2M"
# If this is an all-in-one system, we need at least 4 CPUs
if [ "${aio}" = true -a ${n_cpus} -lt 4 ]; then
report_failure_with_msg "At least 4 CPUs are required for ${SYSTEM_TYPE__AIO} node."
fi
# Add kernel options for cpu isolation / affinity
if [ ${n_cpus} -gt 1 ] ; then
base_cpulist=$(platform_expanded_cpu_list)
ilog "cpumap: base_cpulist: ${base_cpulist}"
base_cpumap=$(cpulist_to_cpumap ${base_cpulist} ${n_cpus})
ilog "cpumap: base_cpumap: ${base_cpumap}"
avp_cpulist=$(vswitch_expanded_cpu_list)
ilog "cpumap: avp_cpulist:${avp_cpulist}"
if [ -e /etc/vswitch/vswitch.conf ] ; then
# Update vswitch.conf
sed -i "s/^VSWITCH_CPU_LIST=.*/VSWITCH_CPU_LIST=\"${avp_cpulist}\"/" /etc/vswitch/vswitch.conf
else
wlog "Missing /etc/vswitch/vswitch.conf ; update bypassed"
fi
norcu_cpumap=$(invert_cpumap ${base_cpumap} ${n_cpus})
ilog "cpumap: norcu_cpumap:${norcu_cpumap}"
norcu_cpulist=$(cpumap_to_cpulist ${norcu_cpumap} ${n_cpus})
ilog "cpumap: norcu_cpulist:${norcu_cpulist}"
if [ "${lowlatency}" = true ]; then
KERN_OPTS="${KERN_OPTS} nohz_full=${norcu_cpulist}"
fi
KERN_OPTS="${KERN_OPTS} rcu_nocbs=${norcu_cpulist}"
KERN_OPTS="${KERN_OPTS} kthread_cpus=${base_cpulist}"
KERN_OPTS="${KERN_OPTS} irqaffinity=${norcu_cpulist}"
fi
else
wlog "Missing /etc/init.d/cpumap_functions.sh ; cpumap setup bypassed"
fi
# Add kernel options to set NMI watchdog
if [ "${lowlatency}" = true ] ; then
add_kernel_option "nmi_watchdog=0 softlockup_panic=0"
else
add_kernel_option "nmi_watchdog=panic,1 softlockup_panic=1"
fi
if [[ "$(dmidecode -s system-product-name)" =~ ^ProLiant.*Gen8$ ]]; then
add_kernel_option "intel_iommu=on,eth_no_rmrr"
else
add_kernel_option "intel_iommu=on"
fi
# Add kernel options to disable kvm-intel.eptad on Broadwell
# Broadwell: Model: 79, Model name: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz
if grep -q -E "^model\s+:\s+79$" /proc/cpuinfo
then
add_kernel_option "kvm-intel.eptad=0"
fi
# Add kernel option to avoid jiffies_lock contention on real-time kernel
if [ "${lowlatency}" = true ] ; then
add_kernel_option "skew_tick=1"
fi
elif [ "${controller}" = true ] ; then
ilog "Adding ${TRAIT__CONTROLLER} function kernel options"
## Custom kernel options
add_kernel_option "intel_iommu=off usbcore.autosuspend=-1"
## Setup the loop module to support up to 15 partitions so that we
## can enable the customer to manually resize images if needed.
##
add_kernel_option "loop.max_part=15"
# Add kernel options to ensure NMI watchdog is enabled, if supported
add_kernel_option "nmi_watchdog=panic,1 softlockup_panic=1"
elif [ "${storage}" = true ] ; then
# We should never reach this code in miniboot:
report_failure_with_msg "Unexpected: 'storage' type not supported in miniboot"
fi
#########################################################################################
# From post_kernel_aio_and_worker.cfg
# From post_kernel_controller.cfg
# From post_kernel_storage.cfg
#########################################################################################
# Add kernel options to ensure an selinux is disabled for all node types
add_kernel_option "selinux=0 enforcing=0"
# Add kernel option to panic on a softdog timeout
add_kernel_option "softdog.soft_panic=1"
# Make sure that we are using cgroups v1
add_kernel_option "systemd.unified_cgroup_hierarchy=0"
# k8s updates
add_kernel_option "user_namespace.enable=1"
# Add kernel option to disable biosdevname if enabled
# As this may already be in GRUB_CMDLINE_LINUX, only add if it is not already present
grep -q '^GRUB_CMDLINE_LINUX=.*biosdevname=0' /etc/default/grub
if [ $? -ne 0 ]; then
add_kernel_option "biosdevname=0"
fi
########################################################################################
ilog "Adding these kernel params to disk boot: ${KERN_OPTS}"
if [ -n "${KERN_OPTS}" ] ; then
grep -q "^kernel_params=" /boot/efi/EFI/BOOT/boot.env
if [ ${?} -ne 0 ]; then
# Add line
sed -i "1 a kernel_params=${KERN_OPTS}" /boot/efi/EFI/BOOT/boot.env
else
# Update existing
sed -i "s/^kernel_params=.*/kernel_params=${KERN_OPTS}/" /boot/efi/EFI/BOOT/boot.env
fi
else
wlog "no kernel options added"
fi
ilog "Override LAT grub file"
GRUB_PATH_N_FILE="/boot/efi/EFI/BOOT/grub.cfg"
if [ ! -e ${GRUB_PATH_N_FILE}.lat ] ; then
mv ${GRUB_PATH_N_FILE} ${GRUB_PATH_N_FILE}.lat
cp /var/pxeboot/pxelinux.cfg.files/grub.cfg.stx ${GRUB_PATH_N_FILE}
fi
######################################################################
# From post_system_aio
######################################################################
if [ "${aio}" = true ] ; then
## Reserve more memory for base processes since the controller has higher
## memory requirements but cap it to better handle systems with large
## amounts of memory
TOTALMEM=$(grep MemTotal /proc/meminfo | awk '{print int($2/1024)}')
ilog "${SYSTEM_TYPE__AIO} MemTotal:${TOTALMEM}"
if [ -e /sys/devices/system/node/node0 ]; then
RESERVEDMEM=$(grep MemTotal /sys/devices/system/node/node0/meminfo | awk '{printf "%d\n", $4/1024}')
else
RESERVEDMEM=$(grep MemTotal /proc/meminfo | awk '{print int($2/1024/4)}')
fi
if [ ${RESERVEDMEM} -lt 6144 ]; then
RESERVEDMEM=6144
elif [ ${RESERVEDMEM} -gt 14500 ]; then
RESERVEDMEM=14500
elif [ ${RESERVEDMEM} -gt 8192 ]; then
RESERVEDMEM=8192
fi
ilog "${SYSTEM_TYPE__AIO} Reserved Memory: ${RESERVEDMEM}"
sed -i -e "s#\(WORKER_BASE_RESERVED\)=.*#\1=(\"node0:${RESERVEDMEM}MB:1\" \"node1:2000MB:0\" \"node2:2000MB:0\" \"node3:2000MB:0\")#g" /etc/platform/worker_reserved.conf
worker_reserved=$(grep WORKER_BASE_RESERVED /etc/platform/worker_reserved.conf)
ilog "${SYSTEM_TYPE__AIO} '${worker_reserved}'"
# Update WORKER_CPU_LIST
N_CPUS=$(cat /proc/cpuinfo 2>/dev/null | awk '/^[pP]rocessor/ { n +=1 } END { print (n>0) ? n : 1}')
sed -i "s/^WORKER_CPU_LIST=.*/WORKER_CPU_LIST=\"0-$((N_CPUS-1))\"/" /etc/platform/worker_reserved.conf
worker_cpu_list=$(grep WORKER_CPU_LIST /etc/platform/worker_reserved.conf)
ilog "${SYSTEM_TYPE__AIO} '${worker_cpu_list}'"
fi
true
%end
###########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
ilog "************************************"
ilog "*** Post - Interface Setup ***"
ilog "************************************"
ilog "Creating network definitions in /etc/network/interfaces.d"
parse_miniboot_network_params
mgmt_dev=${BOOTPARAM_IFNAME}
mgmt_vlan=${BOOTPARAM_VLAN}
mgmt_address_family=${BOOTPARAM_MGMT_ADDRESS_FAMILY}
ilog "mgmt_dev : ${mgmt_dev}"
ilog "mgmt_vlan: ${mgmt_vlan}"
if [ ! -e "${IMAGE_ROOTFS}/etc/network/interfaces" ] ; then
cat << EOF >> ${IMAGE_ROOTFS}/etc/network/interfaces
# This file describes the network interfaces available on the system
# and how to activate them. For more information , see interfaces(5)
source ${IMAGE_ROOTFS}/etc/network/interfaces.d/*
EOF
fi
if [ ! -d "${IMAGE_ROOTFS}/etc/network/interfaces.d" ] ; then
mkdir -p -m 0775 ${IMAGE_ROOTFS}/etc/network/interfaces.d
fi
ilog "Setup network scripts"
if [ $mgmt_vlan -eq 0 ] ; then
# Persist the boot device to the platform configuration. This will get
# overwritten later if the management_interface is on a bonded interface.
update_platform_conf "management_interface=$mgmt_dev"
# Build networking scripts
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo
auto lo
iface lo inet loopback
EOF
if [ $mgmt_dev != "lo" ]; then
ilog "Creating ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-$mgmt_dev"
if [ "${mgmt_address_family}" == "inet" ]; then
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-$mgmt_dev
auto $mgmt_dev
iface $mgmt_dev inet static
address $BOOTPARAM_IP_ADDR/$BOOTPARAM_PREFIX_LEN
gateway $BOOTPARAM_GW
mtu 1500
EOF
else # inet6
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-$mgmt_dev
auto $mgmt_dev
iface $mgmt_dev inet6 static
address $BOOTPARAM_IP_ADDR/$BOOTPARAM_PREFIX_LEN
mtu 1500
post-up echo 0 > /proc/sys/net/ipv6/conf/lo/autoconf; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_redirects
EOF
fi
fi
else # vlan
ilog "Configuring vlan: mgmt_iface=vlan${mgmt_vlan}"
# Persist the boot device to the platform configuration. This will get
# overwritten later if the management_interface is on a bonded interface.
update_platform_conf "management_interface=vlan${mgmt_vlan}"
# Build networking scripts
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo
auto lo
iface lo ${mgmt_address_family} loopback
EOF
if [ "${mgmt_address_family}" == "inet" ]; then
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-$mgmt_dev
auto ${mgmt_dev}
iface ${mgmt_dev} inet manual
post-up echo 0 > /proc/sys/net/ipv4/conf/${mgmt_dev}/autoconf; echo 0 > /proc/sys/net/ipv4/conf/${mgmt_dev}/accept_ra; echo 0 > /proc/sys/net/ipv4/conf/${mgmt_dev}/accept_redirects
EOF
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${mgmt_vlan}
auto vlan${mgmt_vlan}
iface vlan${mgmt_vlan} inet static
vlan-raw-device ${mgmt_dev}
address ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN}
gateway ${BOOTPARAM_GW}
mtu 1500
post-up echo 0 > /proc/sys/net/ipv4/conf/vlan${mgmt_vlan}/autoconf; echo 0 > /proc/sys/net/ipv4/conf/vlan${mgmt_vlan}/accept_ra; echo 0 > /proc/sys/net/ipv4/conf/vlan${mgmt_vlan}/accept_redirects
EOF
else # inet6
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${mgmt_dev}
auto ${mgmt_dev}
iface ${mgmt_dev} inet6 manual
post-up echo 0 > /proc/sys/net/ipv6/conf/${mgmt_dev}/autoconf; echo 0 > /proc/sys/net/ipv6/conf/${mgmt_dev}/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/${mgmt_dev}/accept_redirects
EOF
cat << EOF > ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${mgmt_vlan}
auto vlan${mgmt_vlan}
iface vlan${mgmt_vlan} inet6 static
vlan-raw-device ${mgmt_dev}
address ${BOOTPARAM_IP_ADDR}/${BOOTPARAM_PREFIX_LEN}
mtu 1500
post-up echo 0 > /proc/sys/net/ipv6/conf/vlan${mgmt_vlan}/autoconf; echo 0 > /proc/sys/net/ipv6/conf/vlan${mgmt_vlan}/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/vlan${mgmt_vlan}/accept_redirects
EOF
fi
fi
ilog "Contents of ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo:"
ilog "$(cat "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-lo")"
ilog "Contents of ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${mgmt_dev}:"
ilog "$(cat "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-${mgmt_dev}")"
if [ -f "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${mgmt_vlan}" ]; then
ilog "Contents of ${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${mgmt_vlan}:"
ilog "$(cat "${IMAGE_ROOTFS}/etc/network/interfaces.d/ifcfg-vlan${mgmt_vlan}")"
fi
true
%end
##########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
ilog "*********************************************************"
ilog "*** Post Nochroot - Kickstart Finalize Install UUID ***"
ilog "*********************************************************"
# Create a uuid specific to this installation
# install_uuid under /var needs to match what is written to /etc/platform/platform.conf
# When instflux=0 (/var not on a dedicated fluxdata partition)
# When instflux=1 (/var is part of the two different sysroot deployments).
# Therefore check if the file has been written and use that, otherwise generate it
feed="${IMAGE_ROOTFS}/var/www/pages/feed/rel-xxxPLATFORM_RELEASExxx"
[ ! -d "${feed}" ] && mkdir -p -m 0755 ${feed}
$(is_system_node_install)
if [ $? -ne 0 ] ; then
if [ -e "${LAT_DIR}/INSTALL_UUID" ]; then
INSTALL_UUID=$(< "${LAT_DIR}/INSTALL_UUID")
ilog "Using saved install uuid ${INSTALL_UUID}"
else
INSTALL_UUID=`uuidgen`
ilog "Generated install uuid ${INSTALL_UUID}"
echo "${INSTALL_UUID}" > ${LAT_DIR}/INSTALL_UUID
fi
ilog "... adding to ${feed}"
echo ${INSTALL_UUID} > ${feed}/install_uuid
ilog "... adding to ${PLATFORM_CONF}"
update_platform_conf "INSTALL_UUID=${INSTALL_UUID}"
else
# miniboot: this code should never be hit
report_failure_with_msg "Unexpected: incorrect node during UUID creation"
fi
true
%end
##########################################################################
%post --interpreter=/bin/bash
HOOK_LABEL="post"
. /tmp/lat/ks_functions.sh
ilog "****************************************"
ilog "*** Post - Log Filesystem Setup ***"
ilog "****************************************"
display_volume_info "final"
true
%end
##########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
ilog "***********************************************************"
ilog "*** Post Nochroot - Restage OSTree repo ***"
ilog "*** - Save Install Scripts and Logs ***"
ilog "***********************************************************"
ilog "IMAGE_ROOTFS=${IMAGE_ROOTFS}"
get_variable "ostree_repo_fetched"
OSTREE_REPO_FETCHED=$?
# Fetch ostree
if [ "${controller}" = true ] ; then
sw_release="xxxPLATFORM_RELEASExxx" # updated by the build
feed="${IMAGE_ROOTFS}/var/www/pages/feed/rel-${sw_release}"
repo="${feed}/ostree_repo"
pxedir="${IMAGE_ROOTFS}/var/pxeboot"
if [ ${OSTREE_REPO_FETCHED} -eq 0 ] ; then
if is_usb_install -eq 0 ; then
# miniboot: always false
report_failure_with_msg "Unexpected miniboot code block: usb install"
else
ilog "Stage ostree_repo from previous /sysroot pull to ${repo}"
mv -f /sysroot/var/www/pages/feed/rel-${sw_release}/ostree_repo ${IMAGE_ROOTFS}/var/www/pages/feed/rel-${sw_release}/
fi
# This is used by patching.
# Set ostree remote to the local install feed
file_feed="file:///var/www/pages/feed/rel-${sw_release}/ostree_repo/"
feed_branch="starlingx"
ilog "Replacing ostree sysroot remote with: ${file_feed} ${feed_branch}"
ostree --repo=/sysroot/ostree/repo remote delete ${instname}
ostree --repo=/sysroot/ostree/repo remote add ${instname} ${file_feed} ${feed_branch}
# Set feed ostree remote "starlingx" to point to active controller's feed ostree repo
feed_remote_name="starlingx"
feed_remote_url="http://controller:8080/feed/rel-${sw_release}/ostree_repo/"
ilog "Replacing ostree feed remote with: ${feed_remote_url} ${feed_remote_name}"
ostree --repo=${repo} remote delete ${feed_remote_name}
ostree --repo=${repo} remote add ${feed_remote_name} ${feed_remote_url} ${feed_branch}
# This fetch is only needed once because the repo is stored in /var
set_variable "ostree_repo_fetched"
# copy efi.img to /var/pxeboot to enable duplex/multinode subclouds
cp -a /instboot/efi.img ${pxedir}
rc=$?
if [ rc -ne 0 ]; then
elog "Failed to copy efi.img to ${pxedir}"
fi
# Temporary WorkAround: The current UEFI pxeboot loader does not call the
# default provisioning grub menu in /var/pxeboot/pxelinux.cfg/grub.cfg.
#
# While the above issue is investigated, to support DX and system node
# install for UEFI servers this code moves the lat grub.cfg aside and
# creates a link to the default provisioning mac based grub menu.
if [ ! -e ${pxedir}/EFI/BOOT ]; then
mkdir -p ${pxedir}/EFI/BOOT
fi
pushd ${pxedir}/EFI/BOOT > /dev/null
if [ ! -L grub.cfg ] ; then
if [ -e grub.cfg ] ; then
mv grub.cfg grub.cfg.lat
fi
ln -s ../../pxelinux.cfg/grub.cfg
fi
popd > /dev/null
fi
fi
# Save the install scripts and kickstart logs
mount /dev/mapper/cgts--vg-log--lv "${IMAGE_ROOTFS}/${LOG_DIR}"
if [ ${?} -ne 0 ] ; then
elog "Failed to mount /dev/mapper/cgts--vg-log--lv"
else
if [ -e "${IMAGE_ROOTFS}/${LOG_DIR}" ]; then
cp -a /${LAT_DIR} ${IMAGE_ROOTFS}/${LOG_DIR}
cp /install ${IMAGE_ROOTFS}/${LOG_DIR}/lat
cp /lat-installer* ${IMAGE_ROOTFS}/${LOG_DIR}/lat
ilog "Saved installer data to ${IMAGE_ROOTFS}/${LOG_DIR}"
else
wlog "Could not save installer data"
fi
umount "${IMAGE_ROOTFS}/${LOG_DIR}"
fi
true
%end
##########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
# This section needs to be removed when solutions are implemented
ilog "******************************************************************"
ilog "*** Post Nochroot - Workarounds for enabling integration ***"
ilog "******************************************************************"
# Workaround for enabling swacts on AIO-DX
# Workaround for enabling compute unlocks
# Launchpad: #1983580
[ -f ${IMAGE_ROOTFS}/var/lib/dpkg/triggers/Unincorp ] && rm ${IMAGE_ROOTFS}/var/lib/dpkg/triggers/Unincorp
true
%end
##########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
# This needs to update all available ostree based rootfs
ilog "******************************************************"
ilog "*** Post Nochroot - Set up filesystem access ***"
ilog "******************************************************"
if [ "${controller}" = true ] ; then
mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/opt/platform-backup
echo -e "LABEL=platform_backup\t/var/rootdirs/opt/platform-backup\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab
elif [ "${worker}" = true ] ; then
mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/opt/platform
echo -e "controller-platform-nfs:/opt/platform\t/opt/platform\tnfs\ttimeo=30,udp,rsize=1024,wsize=1024,_netdev 0 0" >> ${IMAGE_ROOTFS}/etc/fstab
fi
mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/scratch
echo -e "/dev/mapper/cgts--vg-scratch--lv\t/var/rootdirs/scratch\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab
mkdir -p ${IMAGE_ROOTFS}/var/log
echo -e "/dev/mapper/cgts--vg-log--lv\t/var/log\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab
# Report and update the lvm config for the sysroot. Remove preceeding tab and
# convert to spaces to align with puppet expectations
LV_ROOTDISK_BY_PATH=$(get_by_path ${LV_ROOTDISK})
log_lvm_conf "SysRoot Initial" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf
ilog ""
ilog "Update the LVM global filter to enable the initial physical volume only: ${LV_ROOTDISK_BY_PATH}"
ilog ""
sed -i "s@^\(\s*\)# global_filter = \[.*@ global_filter = [ \"a|${LV_ROOTDISK_BY_PATH}|\", \"r|.*|\" ]@" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf
log_lvm_conf "SysRoot Updated" ${IMAGE_ROOTFS}/etc/lvm/lvm.conf
eject_device=$(eject -d | awk -F\` '{print $2}' | awk -F\' '{print $1}')
ilog "eject device=$eject_device"
eject $eject_device
rc=$?
[ $rc -ne 0 ] && elog "eject failed, rc=$rc"
# Create first_boot flag
touch ${IMAGE_ROOTFS}/etc/platform/.first_boot
true
%end
##########################################################################
%post --interpreter=/bin/bash --nochroot
HOOK_LABEL="post_nochroot"
. /tmp/lat/ks_functions.sh
# This needs to update all available ostree based rootfs
ilog "****************************************************************"
ilog "*** Post Nochroot - Set up package links per node type ***"
ilog "****************************************************************"
ilog "IMAGE_ROOTFS=${IMAGE_ROOTFS}"
if [ ! -d "${IMAGE_ROOTFS}/etc/goenabled.d" ]; then
wlog "Directory ${IMAGE_ROOTFS}/etc/goenabled.d is missing, creating it now"
mkdir ${IMAGE_ROOTFS}/etc/goenabled.d
fi
if [ ! "${controller}" = true -a "${worker}" = true ] ; then
ilog "Setting up ${TRAIT__WORKER} package file links"
ln -s /etc/goenabled.d/config_goenabled_check.sh.worker ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/controllerconfig.service
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/storageconfig.service
elif [ "${storage}" = true ] ; then
ilog "Setting up ${TRAIT__STORAGE} package file links"
ln -s /etc/goenabled.d/config_goenabled_check.sh.storage ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/controllerconfig.service
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/workerconfig.service
elif [ "${controller}" = true ] ; then
ilog "Setting up ${TRAIT__CONTROLLER} package file links"
ln -s /etc/goenabled.d/config_goenabled_check.sh.controller ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/workerconfig.service
ln -s /dev/null ${IMAGE_ROOTFS}/etc/systemd/system/storageconfig.service
fi
chmod 700 ${IMAGE_ROOTFS}/etc/goenabled.d/config_goenabled_check.sh
if [[ ! -d "${IMAGE_ROOTFS}/etc/pmon.d" ]]; then
wlog "Directory ${IMAGE_ROOTFS}/etc/pmon.d/ is missing, creating it now"
mkdir ${IMAGE_ROOTFS}/etc/pmon.d
fi
if [ "${controller}" = true ] ; then
ilog "Setting up pmon files for ${TRAIT__CONTROLLER} and/or ${TRAIT__CONTROLLER} side of ${SYSTEM_TYPE__AIO}"
ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
ln -s /usr/share/starlingx/pmon.d/fm-api.conf ${IMAGE_ROOTFS}/etc/pmon.d/fm-api.conf
ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
ln -s /usr/share/starlingx/pmon.d/hbsAgent.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsAgent.conf
ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
ln -s /usr/share/starlingx/pmon.d/sm-api.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-api.conf
ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
ln -s /usr/share/starlingx/pmon.d/sm.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm.conf
ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
ln -s /usr/share/starlingx/pmon.d/sssd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sssd.conf
ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
ln -s /usr/share/starlingx/pmon.d/sw-patch-controller-daemon.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-controller-daemon.conf
ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
fi
if [ "${worker}" = true ] ; then
ilog "Setting up pmon files for ${TRAIT__WORKER} and/or ${TRAIT__WORKER} side of ${SYSTEM_TYPE__AIO}"
ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
ln -s /usr/share/starlingx/pmon.d/guestServer.conf ${IMAGE_ROOTFS}/etc/pmon.d/guestServer.conf
ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
ln -s /usr/share/starlingx/pmon.d/isolcpu_plugin.conf ${IMAGE_ROOTFS}/etc/pmon.d/isolcpu_plugin.conf
ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
ln -s /usr/share/starlingx/pmon.d/sssd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sssd.conf
ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
fi
if [ "${storage}" = true ] ; then
ilog "Setting up pmon files for ${TRAIT__STORAGE} and/or ${TRAIT__STORAGE} side of ${SYSTEM_TYPE__AIO}"
ln -s /usr/share/starlingx/pmon.d/acpid.conf ${IMAGE_ROOTFS}/etc/pmon.d/acpid.conf
ln -s /usr/share/starlingx/pmon.d/containerd.conf ${IMAGE_ROOTFS}/etc/pmon.d/containerd.conf
ln -s /usr/share/starlingx/pmon.d/docker.conf ${IMAGE_ROOTFS}/etc/pmon.d/docker.conf
ln -s /usr/share/starlingx/pmon.d/fsmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/fsmon.conf
ln -s /usr/share/starlingx/pmon.d/hbsClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/hbsClient.conf
ln -s /usr/share/starlingx/pmon.d/lmon.conf ${IMAGE_ROOTFS}/etc/pmon.d/lmon.conf
ln -s /usr/share/starlingx/pmon.d/logmgmt ${IMAGE_ROOTFS}/etc/pmon.d/logmgmt
ln -s /usr/share/starlingx/pmon.d/mtcClient.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcClient.conf
ln -s /usr/share/starlingx/pmon.d/mtcalarm.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtcalarm.conf
ln -s /usr/share/starlingx/pmon.d/mtclogd.conf ${IMAGE_ROOTFS}/etc/pmon.d/mtclogd.conf
ln -s /usr/share/starlingx/pmon.d/sm-eru.conf ${IMAGE_ROOTFS}/etc/pmon.d/sm-eru.conf
ln -s /usr/share/starlingx/pmon.d/sshd.conf ${IMAGE_ROOTFS}/etc/pmon.d/sshd.conf
ln -s /usr/share/starlingx/pmon.d/sw-patch-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sw-patch-agent.conf
ln -s /usr/share/starlingx/pmon.d/sysinv-agent.conf ${IMAGE_ROOTFS}/etc/pmon.d/sysinv-agent.conf
ln -s /usr/share/starlingx/pmon.d/syslog-ng.conf ${IMAGE_ROOTFS}/etc/pmon.d/syslog-ng.conf
fi
true
%end
View Git Blame Copy Permalink