diff --git a/kickstart/debian/deb_folder/rules b/kickstart/debian/deb_folder/rules index 58e7c0f4..76010386 100644 --- a/kickstart/debian/deb_folder/rules +++ b/kickstart/debian/deb_folder/rules @@ -9,6 +9,7 @@ export platform_release="$(shell grep SW_VERSION /usr/include/build_info.h | cut override_dh_auto_configure: sed -i s/xxxPLATFORM_RELEASExxx/$(platform_release)/g kickstart.cfg + sed -i s/xxxPLATFORM_RELEASExxx/$(platform_release)/g miniboot.cfg dh_auto_configure override_dh_install: @@ -16,4 +17,5 @@ override_dh_install: install -p -D -m 700 kickstart.cfg $(ROOT)/var/www/pages/feed/rel-${platform_release} install -d -m 755 $(ROOT)/var/pxeboot install -p -D -m 700 menu.c32 $(ROOT)/var/pxeboot + install -p -D -m 700 miniboot.cfg $(ROOT)/var/www/pages/feed/rel-${platform_release} dh_install diff --git a/kickstart/files/miniboot.cfg b/kickstart/files/miniboot.cfg new file mode 100644 index 00000000..5e58d4ec --- /dev/null +++ b/kickstart/files/miniboot.cfg @@ -0,0 +1,1999 @@ +# +# Copyright (c) 2022 Wind River Systems, Inc. +# SPDX-License-Identifier: Apache-2.0 +# +############################################################################ +# +# StarlingX Debian Unified Miniboot/USB Install Kickstart +# +############################################################################ +# +# This is the unified kickstart for Debian installation of subcloud nodes +# from the USB or over Redfish. +# +# The Linux Assembly Tool (LAT) performs a unified install for all subcloud +# nodes and exposes boot loader environment variables to this kickstart. +# +# This kickstart must be called with the 'traits=' boot parameter. +# Valid traits are: +# +# controller ... the controller function +# storage ... the storage function +# worker ... the worker function +# lowlatency ... the low latency function +# miniboot ... redfish subcloud install function +# +# Valid node personality trait groupings ... set configuration function +# +# traits=controller ... Controller +# traits=controller,worker ... All-in-one +# traits=controller,worker,lowlatency ... All-in-one Low Latency +# traits=storage ... Storage +# traits=worker ... Worker +# traits=worker,lowlatency ... Worker Low Latency +# +# Kickstart Stages +# +# Pre Partition - Common Functions Script +# Pre Partition - Volume Remove & Wipe Disk +# Partition - Partition Disks & Create Volumes +# Mkfs - Create Volume Groups & Logical Volumes +# Post - Logical Volume Config +# Post - Traits & Platform Config File update +# Post - Set Kernel Args +# Post - Interface Setup +# Post - Kickstart Finalize Install UUID +# Post - Log Filesystem Setup +# Post Nochroot - Save Install scripts and Logs +# Post Nochroot - Set up /etc/fstab +# +############################################################################ +# +# LAT disk install override debug tool interface. +# +# lat-disk --install-device=${INSTDEV} \ +# --fat-size=${FSZ} \ +# --boot-size=${BSZ} \ +# --root-size=${RSZ} \ +# --var-size=${VSZ} \ +# --inst-flux=0 +# +# Notes: exported environment variables changed in 'post' sections +# do not change the original value. +# +########################################################################### +# +# The first kickstart script creates '/tmp/lat/functions' common functions +# file that can be loaded from any of the other hook sections. +# +########################################################################### +# Kickstart Early - Common Functions Script +%ks-early --interpreter=/bin/bash + +# Define a hook to report error log if install failed +cat << EOF > /tmp/lat/report_error_log.sh +#!/bin/bash +_dev=\$(blkid --label fluxdata -o device) +if [ "\$_dev" != "" ] ; then + mkdir -p /t + mount -o rw,noatime \$_dev /t + echo "Save install-fail.log to partition fluxdata /var (\$_dev)" + sleep 2 + cp /install.log /t/install-fail.log + umount /t +fi +EOF +chmod 755 /tmp/lat/report_error_log.sh + +cat << EOF >> /tmp/lat/ks_functions.sh + +[ "\${HOOK_LABEL}" = "" ] && HOOK_LABEL="unknown" + +export LOG_DIR="var/log" +export LAT_DIR="tmp/lat" +export LOGFILE="/\${LAT_DIR}/miniboot.log" + +############################################################################ +# log utils +############################################################################ +function log() +{ + local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")" + echo "\$dt kickstart \${HOOK_LABEL} info: \$1" >>\${LOGFILE} +} + +function ilog() +{ + [ -z "$stdout" ] && stdout=1 + local dt="$(date "+%Y-%m-%d %H:%M:%S.%3N")" + echo "\$dt kickstart \${HOOK_LABEL} info: \$1" >&\${stdout} + echo "\$dt kickstart \${HOOK_LABEL} info: \$1" >>\${LOGFILE} +} + +function dlog() +{ + if [ "\${debug}" ] ; then + [ -z "\$stdout" ] && stdout=1 + local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")" + echo "\$dt kickstart \${HOOK_LABEL} debug: \$1" >&\${stdout} + echo "\$dt kickstart \${HOOK_LABEL} debug: \$1" >>\${LOGFILE} + fi +} + +function wlog() +{ + [ -z "\$stdout" ] && stdout=1 + local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")" + echo "\$dt kickstart \${HOOK_LABEL} warn: \$1" >&\${stdout} + echo "\$dt kickstart \${HOOK_LABEL} warn: \$1" >>\${LOGFILE} +} + +function elog() +{ + [ -z "\$stdout" ] && stdout=1 + local dt="\$(date "+%Y-%m-%d %H:%M:%S.%3N")" + echo "\$dt kickstart \${HOOK_LABEL} error: \$1" >&\${stdout} + echo "\$dt kickstart \${HOOK_LABEL} error: \$1" >>\${LOGFILE} +} + +function report_failure_with_msg() +{ + local msg=\${1} + echo -e '\n\nInstallation failed.\n' + wlog "Installation Failed: ERROR: \${msg}" + exit 1 +} + +######################################################################## +# Name : get_disk +# Parameters: \$1 - ?????? +# Returns : No return but common disk name is echo's to stdio +######################################################################### +function get_disk() +{ + echo "\$(cd /dev ; readlink -f \$1)" +} + +######################################################################### +# Name : get_by_path +# Parameters: \$1 - device name i.e. /dev/sda +# Returns : echo of device name by-path +# example: /dev/disk/by-path/pci-0000:03:00.0-scsi-0:2:0:0 +######################################################################### +function get_by_path() +{ + # log "Function: get_by_path '\${1}'" + local disk=\$(cd /dev ; readlink -f \$1) + for p in /dev/disk/by-path/*; do + if [ "\$disk" = "\$(readlink -f \$p)" ]; then + echo "\$p" + return + fi + done +} + +######################################################################### +# Name : get_disk_dev +# Purpose : get the disk name +# Returns : echo of the first disk name found ; base on coded priority +######################################################################### +function get_disk_dev() +{ + local disk + # Detect HDD + for blk_dev in vda vdb sda sdb dda ddb hda hdb; do + if [ -d /sys/block/\$blk_dev ]; then + disk=\$(ls -l /sys/block/\$blk_dev | grep -v usb | head -n1 | sed 's/^.*\([vsdh]d[a-z]\+\).*\$/\1/'); + if [ -n "\$disk" ]; then + echo "\$disk" + return + fi + fi + done + for blk_dev in nvme0n1 nvme1n1; do + if [ -d /sys/block/\$blk_dev ]; then + disk=\$(ls -l /sys/block/\$blk_dev | grep -v usb | head -n1 | sed 's/^.*\(nvme[01]n1\).*\$/\1/'); + if [ -n "\$disk" ]; then + echo "\$disk" + return + fi + fi + done +} + +######################################################################### +# Name : exec_retry +# Purpose : Retry operations up to a caller specified ... +# Parameters: $1 - retries - up to number of retries before giving up +# $2 - time in seconds between each retry +# $3 - the command string to execute +# Returns : exit code from last command operation +######################################################################### +function exec_retry() +{ + local retries=\${1} + local interval=\${2} + local command=\${3} + + # local variables + retry_count=1 + local ret_code=0 + local ret_stdout="" + + command="\${command}" # 2>&\$stdout" + while [ \$retry_count -le \$retries ]; do + # dlog "Running command: '\${command}'." + ret_stdout=\$(eval \${command}) + ret_code=\${?} + [ \$ret_code -eq 0 ] && break + wlog "Error running command '\${command}'. Try \${retry_count} of \${retries} retry in \${interval}s." + wlog "ret_code: \${ret_code}, stdout: '\${ret_stdout}'." + sleep \${interval} + retry_count=\$((retry_count+1)) + done + echo "\${ret_stdout}" + return \${ret_code} +} + +######################################################################### +# Name : exec_no_fds +# Purpose : Execute command (with retries) after closing fds +# Parameters: $1 - List of volume file descriptors +# $2 - the command string to execute +# $3 - up to number of retries before giving up +# $4 - time in seconds between each retry +# Returns : exit code from last command operation +######################################################################### + +function exec_no_fds() +{ + # Close open FDs when executing commands that complain about leaked FDs. + local fds=\${1} + local cmd=\${2} + local retries=\${3} + local interval=\${4} + + local ret_code=0 + local ret_stdout="" + for fd in \$fds + do + local cmd="\$cmd \$fd>&-" + done + if [ -z "\$retries" ]; then + #wlog "Running command: '\$cmd'." + eval "\$cmd" + else + ret_stdout=\$(exec_retry "\$retries" "\$interval" "\$cmd") + ret_code=\$? + echo "\${ret_stdout}" + return \${ret_code} + fi +} + +######################################################################### +# Name : is_system_node_install +# Returns : 1 if yes 'pxecontroller' is in $insturl boot arg ; else 0 +######################################################################### +function is_system_node_install() +{ + if [[ "\$insturl" == *"pxecontroller"* ]] ; then + return 0 + else + return 1 + fi +} + +######################################################################### +# Name : update_platform_conf +# Purpose : Update the platform.conf file with logging +######################################################################### + +PLATFORM_CONF="/etc/platform/platform.conf" +function update_platform_conf() +{ + ilog "update \${PLATFORM_CONF} : \${1}" + echo "\${1}" >> \${PLATFORM_CONF} +} + +######################################################################### +# Name : get_iface_from_ethname +# Purpose : Translate eth# interface to the alternate predicitive +# interface name'altname'. +# Parameter: eth# name interface string to translate +# Return : echo's of altname interface string +######################################################################### +# TODO: Move to where its used if there is only one section caller +function get_iface_from_ethname() +{ + iface=\${1} + + # log the interface info for post issue debug + udevadm info --export --query=property --path=/sys/class/net/\${iface} >> \${LOGFILE} + + # convert to predictive name: ONBOARD > SLOT > PATH + # https://wiki.debian.org/NetworkInterfaceNames + altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_ONBOARD) + altname=\${altname#ID_NET_NAME_ONBOARD=} + + if [ -z "\${altname}" ] ; then + # try searching for ID_NET_NAME_SLOT + log "... retrying to translate \${iface} to predictive name with ID_NET_NAME_SLOT filter label " + altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_SLOT) + altname=\${altname#ID_NET_NAME_SLOT=} + fi + + if [ -z "\${altname}" ] ; then + # try searching for ID_NET_NAME_PATH + log "... retrying to translate \${iface} to predictive name with ID_NET_NAME_PATH filter label " + altname=\$(udevadm info --export --query=property --path=/sys/class/net/\${iface} | grep ID_NET_NAME_PATH) + altname=\${altname#ID_NET_NAME_PATH=} + fi + + # The altname is seen enveloped with tick's ; 'eno1' + # Handle with and without tick's just in case + if [ -z "\${altname}" ] ; then + log "Failed to translate \${iface} to predictive name" + elif [ "\${altname::1}" = "'" ] ; then + echo "\${altname:1:-1}" + else + echo "\${altname}" + fi +} + +function display_volume_info () +{ + if [ \${debug} -ne 0 ] ; then + ilog "Volume Info:\${1}" + + pvscan 2>/dev/null + pvscan 2>/dev/null >> \${LOGFILE} + + lvscan 2>/dev/null + lvscan 2>/dev/null >> \${LOGFILE} + + pvdisplay 2>/dev/null + pvdisplay 2>/dev/null >> \${LOGFILE} + + lvdisplay 2>/dev/null + lvdisplay 2>/dev/null >> \${LOGFILE} + fi +} + +display_mount_info() +{ + if [ \${debug} -ne 0 ] ; then + echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" + lsblk -o name,mountpoint,label,size,uuid + echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~" + fi +} + +function log_lvm_conf () +{ + lvm_global_filter=\$(cat /etc/lvm/lvm.conf | grep "global_filter =") + ilog "LVM 'global_filter' Config: \${lvm_global_filter}" + lvm_preferred_names=\$(cat /etc/lvm/lvm.conf | grep "preferred_names =") + ilog "LVM 'lvm_preferred_names' Config: \${lvm_preferred_names}" +} + +function breakpoint() +{ + echo "*** BREAKPOINT ***: \${1} ; type exit to continue" + bash + echo "continuing from breakpoint: \${1}" +} + +function set_variable() +{ + touch "/\${LAT_DIR}/\${1}" +} + +function get_variable() +{ + [ -e "/\${LAT_DIR}/\${1}" ] && return 1 + return 0 +} + +function clr_variable() +{ + rm -f "/\${LAT_DIR}/\${1}" +} + +######################################################################### +# Name : get_aio_controller_provisioning_sizes +# Purpose : Provide Physical volume / Logical volume sizes +# Parameter: None +# Return : Nothing, but exports key values +######################################################################### +function get_aio_controller_provisioning_sizes() +{ + gb=$((1024*1024*1024)) + + ## + ## NOTE: updates to partition sizes need to be also reflected in + ## - config/.../sysinv/conductor/manager.py:create_controller_filesystems() + ## - config/.../sysinv/common/constants.py + ## + ## NOTE: When adding partitions, we currently have a max of 4 primary partitions. + ## If more than 4 partitions are required, we can use a max of 3 --asprimary, + ## to allow 1 primary logical partition with extended partitions + ## + ## NOTE: Max default PV size must align with the default controllerfs sizes + ## + ## + ## NOTE TO REVIEWERS: + ## This section was talen from CentOS and needs to be updated for Debian. + ## + ##*********************************************************************** + ## Large disk install (for disks over 240GB) + ## - DB size is doubled to allow for upgrades + ## + ## BACKUP_OVERHEAD = 5GiB + ## DEFAULT_PLATFORM_STOR_SIZE = 10GiB + ## DEFAULT_DATABASE_STOR_SIZE = 10GiB + ## BACKUP = DEFAULT_DATABASE_STOR_SIZE + + ## DEFAULT_PLATFORM_STOR_SIZE + + ## BACKUP_OVERHEAD = 25GiB + ## LOG_VOL_SIZE = 8GiB + ## SCRATCH_VOL_SIZE = 16GiB + ## RABBIT_LV = 2GiB + ## DEFAULT_EXTENSION_STOR_SIZE = 1GiB + ## KUBERNETES_DOCKER_STOR_SIZE = 30GiB + ## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB + ## ETCD_STOR_SIZE = 5GiB + ## CEPH_MON_SIZE = 20GiB + ## KUBELET_STOR_SIZE = 10GiB + ## DC_VAULT_SIZE = 15GiB + ## RESERVED_PE = 16MiB (based on pesize=32768) + ## + ## MINIMUM_PLATFORM_PV_SIZE = (10 + 2*10 + 25 + 8 + 16 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 178.02GiB + ## + ##*********************************************************************** + ## Small disk install - (for disks below 240GB) + ## - DB size is doubled to allow for upgrades + ## + ## DEFAULT_PLATFORM_STOR_SIZE = 10GiB + ## DEFAULT_SMALL_DATABASE_STOR_SIZE = 5GiB + ## DEFAULT_SMALL_BACKUP_STOR_SIZE = 20GiB + ## + ## LOG_VOL_SIZE = 8GiB + ## SCRATCH_VOL_SIZE = 16GiB + ## RABBIT_LV = 2GiB + ## DEFAULT_EXTENSION_STOR_SIZE = 1GiB + ## KUBERNETES_DOCKER_STOR_SIZE = 30GiB + ## DOCKER_DISTRIBUTION_STOR_SIZE = 16GiB + ## ETCD_STOR_SIZE = 5GiB + ## CEPH_MON_SIZE = 20GiB + ## KUBELET_STOR_SIZE = 10GiB + ## DC_VAULT_SIZE = 15GiB + ## RESERVED_PE = 16MiB (based on pesize=32768) + ## + ## MINIMUM_PLATFORM_PV_SIZE = (10 + 2*5 + 20 + 8 + 16 + 2 + 1 + 30 + 16 + 5 + 20 + 10 + 15)GiB + 16MiB/1024 = 163.02GiB + ## + ##*********************************************************************** + ## Tiny disk install - (for disks below 154GB) + ## + ## NOTE: Tiny disk setup is mainly for StarlingX running in QEMU/KVM VM. + ## + ## DEFAULT_TINY_PLATFORM_STOR_SIZE = 1GiB + ## DEFAULT_TINY_DATABASE_STOR_SIZE = 1GiB + ## DEFAULT_TINY_BACKUP_STOR_SIZE = 1GiB + ## + ## LOG_VOL_SIZE = 3GiB + ## SCRATCH_VOL_SIZE = 2GiB + ## RABBIT_LV = 2GiB + ## DEFAULT_EXTENSION_STOR_SIZE = 1GiB + ## TINY_KUBERNETES_DOCKER_STOR_SIZE = 20GiB + ## TINY_DOCKER_DISTRIBUTION_STOR_SIZE = 8GiB + ## TINY_ETCD_STOR_SIZE = 1GiB + ## TINY_KUBELET_STOR_SIZE = 2GiB + ## + ## MINIMUM_PLATFORM_PV_SIZE = (1 + 2*1 + 1 + 3 + 2 + 2 + 1 + 20 + 8 + 1 + 2)GiB = 43GiB + ## + ## MINIMUM_TINY_DISK_SIZE = MINIMUM_PLATFORM_PV_SIZE + ROOTFS_SIZE + EFI_SIZE + BOOT_SIZE + FLUXDATA + PLATFORM_BACKUP_SIZE + ## = 43 + 20 + 0.03 + 0.5 + 20 + 1 = 85GiB + + # TODO: create a log representing 'free space" on self expand partition. + + # TODO: Do the math for this new environment + + # The default disk size thresholds must align with the ones in + # config/.../sysinv/common/constants.py + # which are DEFAULT_SMALL_DISK_SIZE + # MINIMUM_SMALL_DISK_SIZE + default_small_disk_size=240 + minimum_small_disk_size=196 + sz=\$(blockdev --getsize64 \${INSTDEV}) + ilog "install disk size:\$sz gb:\$gb" + + # Round MINIMUM_PLATFORM_PV_SIZE to the closest upper value that can be divided by 1024. + if [ \$sz -gt \$((\$default_small_disk_size*\$gb)) ] ; then + ilog "Large disk: MINIMUM_PLATFORM_PV_SIZE=179GiB*1024=183296" + export MINIMUM_PLATFORM_PV_SIZE=183296 + + elif [ \$sz -ge \$((\$minimum_small_disk_size*\$gb)) ] ; then + ilog "Small disk: MINIMUM_PLATFORM_PV_SIZE=164GiB*1024=167936" + export MINIMUM_PLATFORM_PV_SIZE=167936 + + else + ilog "Tiny disk: MINIMUM_PLATFORM_PV_SIZE=43GiB*1024=44032" + # Using a disk with a size under 85GiB will fail. + export MINIMUM_PLATFORM_PV_SIZE=44032 + export LOG_VOL_SIZE=3000 + export SCRATCH_VOL_SIZE=2000 + export PLATFORM_BACKUP_SIZE=1000 + fi +} + +######################################################################### +# Name : get_std_controller_provisioning_sizes +# Purpose : Provide Logical Volume sizes +# Parameter: None +# Return : Nothing, but exports key values +######################################################################### +function get_std_controller_provisioning_sizes() +{ + export LOG_VOL_SIZE=8000 + export SCRATCH_VOL_SIZE=16000 +} + + +########################################################################## +# Global Kickstart Constants # +########################################################################## +# +# NOTE: exported Variables from other segments are NOT visible from functions +# + +if [ "${INSTFLUX}" = 0 ] ; then + BACKUP_PART_NO=5 # in base_bullseye.yaml, instflux=0 +else + BACKUP_PART_NO=6 # in base_bullseye.yaml, instflux=1 or not set +fi +case \${INSTDEV} in + *"nvme"*) + BACKUP_PART=\${INSTDEV}p\${BACKUP_PART_NO} + ;; + *) + BACKUP_PART=\${INSTDEV}\${BACKUP_PART_NO} + ;; +esac +BACKUP_PART_LABEL="platform_backup" + +DEFAULT_PERSISTENT_SIZE=30000 + +# Note that the BA5EBA11-0000-1111-2222- is the prefix used by STX and it's +# defined in sysinv constants.py. Since the 000000000001 suffix is used by +# custom stx LVM partitions, the next suffix is used for the persistent backup +# partition (000000000002) +BACKUP_PART_GUID="BA5EBA11-0000-1111-2222-000000000002" + +# Node Personality Trait +TRAIT__CONTROLLER="controller" +TRAIT__STORAGE="storage" +TRAIT__WORKER="worker" +TRAIT__LOWLATENCY="lowlatency" + +# System Types +SYSTEM_TYPE__AIO="All-in-one" +SYSTEM_TYPE__STANDARD="Standard" + +# Node Subfunctions +SUBFUNCTION__CONTROLLER="\${TRAIT__CONTROLLER}" +SUBFUNCTION__STORAGE="\${TRAIT__STORAGE}" +SUBFUNCTION__WORKER="\${TRAIT__WORKER}" +SUBFUNCTION__AIO="\${TRAIT__CONTROLLER},\${TRAIT__WORKER}" +SUBFUNCTION__AIO_LOWLATENCY="\${TRAIT__CONTROLLER},\${TRAIT__WORKER},\${TRAIT__LOWLATENCY}" +VOLUME_GROUPS="cgts-vg" + +ROOTFS_SIZE=\${RSZ} # 20000 +BOOT_SIZE=\${BSZ} # 500 +EFI_SIZE=300 +LOG_VOL_SIZE=8000 +SCRATCH_VOL_SIZE=16000 +EOF + +chmod 755 /tmp/lat/ks_functions.sh +HOOK_LABEL="ks-early" +. /tmp/lat/ks_functions.sh + +########################################################################## +# Global Kickstart variables # +########################################################################## + +export debug=0 + +export PLATFORM_BACKUP_SIZE=${DEFAULT_PERSISTENT_SIZE} + +# Assume there is no Platform Backup (persistent) Partition +export BACKUP_CREATED=0 +export BACKUP_PERSISTED=0 + +# Platform Backup Partition Info +export BACKUP_PART_FIRST=0 +export BACKUP_PART_END=0 +export BACKUP_PART_SIZE=0 +export BACKUP_PART_FLAGS=0 +export BACKUP_PART_NAME="" + +export STOR_DEV_FDS="$(ls -1 /proc/$$/fd | egrep -v "^(0|1|2|255)$" | xargs)" + +########################################################################## + +ilog "***********************************************" +ilog "** Pre Partition - Volume Remove & Wipe Disk **" +ilog "***********************************************" + +ilog "Waiting for disks to be available" +udevadm settle --timeout=300 || report_failure_with_msg "udevadm settle failed" +ilog "Disks became available" + +# Default traits to AIO if missing +if [ -z "${traits}" ] ; then + traits="controller,worker" + wlog "traits option missing ; defaulting to ${traits}" +fi + +export controller=false +export storage=false +export worker=false +export lowlatency=false +export miniboot=false +export aio=false +for trait in ${traits//,/ }; do + # dlog "trait:${trait}" + case ${trait} in + "controller") controller=true ;; + "storage") storage=true ;; + "worker") worker=true ;; + "lowlatency") lowlatency=true ;; + "miniboot") miniboot=true ;; + *) wlog "unknown trait '${trait}'" ;; + esac +done + +ilog "Install traits: $traits" + +# Force enable 'lowlatency' trait if the realtime kernel is detected ; PREEMPT_RT +uname=$(uname -a) +if [[ "${uname}" == *"PREEMPT_RT"* ]] ; then + if [ "${lowlatency}" = false ] ; then + wlog "forcing lowlatency trait after discovering the RT kernel" + lowlatency=true + fi +fi + +[ "${controller}" = true -a "${worker}" = true ] && aio=true + +grep -q 'debug_kickstart' /proc/cmdline +if [ $? -eq 0 ]; then + debug=1 +fi + +ilog "LAT size parameters: FSZ=${FSZ} BSZ=${BSZ} RSZ=${RSZ} VSZ=${VSZ}" + +# First, parse /proc/cmdline to find the boot args +set -- `cat /proc/cmdline` +ilog "/proc/cmdline:$*" + +# for I in $*; do case "$I" in *=*) eval $I 2>/dev/null;; esac; done +for arg in $*; do + case "$arg" in + *=*) + eval $arg 2>/dev/null + log "arg : $arg" + ;; + esac +done + +# Note: This is equivalent to pre_disk_setup_common.cfg + +# Name : check_execs +# Purpose: Confirm all the executables required by the kickstart are present +# Returns: 1 of one or more executable are missing +REQUIRED_EXECS="bc blkid dd lvcreate mkfs.ext4 partprobe pvremove pvs sgdisk vgcreate wipefs" + +function check_execs() +{ + missing_exec=0 + for x in ${REQUIRED_EXECS} ; do + which ${x} > /dev/null 2>&1 + if [ ${?} -ne 0 ] ; then + elog "dependency check failed ; required '${x}' exec is missing" + missing_exec=1 + fi + done + return ${missing_exec} +} + +# TODO: Remove this function. LAT should be setting the IP address. +# +function set_nw_add_ipv4() +{ + ilog "Setting Network IPV4 address" + set -- `cat /proc/cmdline` + ipstring=$(echo $* | xargs -n 1 | awk '/ip/ {print}' | awk -F'=' '{print $2}') + ipadd=$(echo ${ipstring} | awk -F':' '{print $1}') + gw=$(echo ${ipstring} | awk -F':' '{print $3}') + bootif=$(echo ${ipstring} | awk -F':' '{print $6}') + dlog "IPSTRING IS ${ipstring}" + dlog "IP=${ipadd} gw=${gw} bootif=${bootif}" + ip address add ${ipadd}/24 dev ${bootif} + ip link set dev ${bootif} up + ip route add default via ${gw} dev ${bootif} + echo "nameserver 128.244.144.130" > /etc/resolv.conf + ip route show + sleep 15 +} + +# Log Traits +[ "${controller}" = true ] && ilog "Controller Function" +[ "${storage}" = true ] && ilog "Storage Function" +[ "${worker}" = true ] && ilog "Worker Function" +[ "${lowlatency}" = true ] && ilog "Low Latency Function" +[ "${miniboot}" = true ] && ilog "Zero Touch Install Function" + +# Log System Type +if [ ${aio} = true ] ; then + ilog "${SYSTEM_TYPE__AIO} system" +else + ilog "${SYSTEM_TYPE__STANDARD} system" +fi + +# Verify that all the required executables are presenty +check_execs +[ $? -ne 0 ] && report_failure_with_msg "Required executables are missing" + +#################################################### +# pre_common_head (obsolete with lat) +#################################################### +# TODO: The installer does not have 'timezone' +# Does LAT handle this ? +wlog "timezone not set ; 'timezone --nontp --utc UTC'" +true +%end + +# Pre Partition - Pre Disk Setup Common Script +%pre-part --interpreter=/bin/bash +HOOK_LABEL="pre-part" +. /tmp/lat/ks_functions.sh + +##################################################### +# From pre_disk_setup_common.cfg +##################################################### +set_nw_add_ipv4 + +if [ -n "$INSTDEV" ] ; then + instdev_by_path=$(get_by_path $INSTDEV) + if [ -z ${instdev_by_path} ] ; then + report_failure_with_msg "invalid install device ${INSTDEV}" + else + ilog "Install device: ${INSTDEV} : ${instdev_by_path}" + fi +fi + +# Get all block devices of type disk in the system. +# This includes solid state devices. +# Note: /dev/* are managed by kernel tmpdevfs while links in +# /dev/disk/by-path/ are managed by udev which updates them +# asynchronously so avoid using them while performing partition +# operations. +ilog "Detected storage devices:" +STOR_DEVS="" +for f in /dev/disk/by-path/*; do + dev=$(readlink -f $f) + # dlog "found device ${f}" + exec_retry 2 0.5 "lsblk --nodeps --pairs $dev" | grep -q 'TYPE="disk"' + if [ $? -eq 0 ] ; then + # Filter out ISO disk from storage devices + check_valid_dev $dev || continue + STOR_DEVS="$STOR_DEVS $dev" + ilog "Adding ${f} -> ${dev} to managed device list" + fi +done + +# Filter STOR_DEVS variable for any duplicates as on some systems udev +# creates multiple links to the same device. This causes issues due to +# attempting to acquire a flock on the same device multiple times. +STOR_DEVS=$(echo "$STOR_DEVS" | xargs -n 1 | sort -u | xargs) +ilog "Unique storage devices: $STOR_DEVS" +if [ -z "$STOR_DEVS" ] ; then + report_failure_with_msg "No storage devices available." +fi + +# Lock all devices so that udev doesn't trigger a kernel partition table +# rescan that removes and recreates all /dev nodes for partitions on those +# devices. Since udev events are asynchronous this could lead to a case +# where /dev/ links for existing partitions are briefly missing. +# Missing /dev links leads to command execution failures. +for dev in $STOR_DEVS; do + exec {fd}>$dev || report_failure_with_msg "Error creating file descriptor for $dev." + flock -n "$fd" || report_failure_with_msg "Can't get a lock on fd $fd of device $dev." + STOR_DEV_FDS="$STOR_DEV_FDS $fd" + ilog "Locked ${dev} fd:${fd}" +done + +# Log info about system state at beginning of partitioning operation +for dev in $STOR_DEVS; do + ilog "Initial partition table for $dev is:" + # log "Initial partition table for $dev is:" + parted -s $dev unit mib print + # parted -s $dev unit mib print >> ${LOGFILE} +done + +display_volume_info "before" +display_mount_info + +# Consider removing since LAT already handles this failure mode +# Ensure specified device is not a USB drive +udevadm info --query=property --name=${INSTDEV} |grep -q '^ID_BUS=usb' +if [ $? -eq 0 ]; then + report_failure_with_msg "Specified installation ($INSTDEV) device is a USB drive." +fi + +# Log the disk setup +ilog "Volume Groups : ${VOLUME_GROUPS} ; $STOR_DEV_FDS" + +# update lvm.conf to prevent udev delays for locked devices +sed -i "s#obtain_device_list_from_udev = 1#obtain_device_list_from_udev = 0#" /etc/lvm/lvm.conf + +# Deactivate existing volume groups to avoid Anaconda issues with pre-existing groups +# TODO: May not need this Anaconda specific behavior work around +vgs=$(exec_no_fds "$STOR_DEV_FDS" "vgs --noheadings -o vg_name 2>/dev/null") +if [ -z ${vgs} ] ; then + ilog "No volume groups found" +else + ilog "Found '${vgs}' volume groups" + for vg in $vgs; do + wlog "... disabling $vg" + exec_no_fds "$STOR_DEV_FDS" "vgchange -an $vg 2>/dev/null" 5 0.5 + [ $? -ne 0 ] && report_failure_with_msg "Failed to disable $vg." + done + + # Remove the volume groups that have physical volumes on the root disk + for vg in $(exec_no_fds "$STOR_DEV_FDS" "vgs --noheadings -o vg_name"); do + exec_no_fds "$STOR_DEV_FDS" "pvs --select \"vg_name=$vg\" --noheadings -o pv_name" | grep -q "${INSTDEV}" + if [ $? -ne 0 ]; then + wlog "Found $vg with no PV on rootfs, ignoring." + continue + fi + wlog "Removing LVs on $vg." + exec_no_fds "$STOR_DEV_FDS" "lvremove --force $vg" 5 0.5 || wlog "WARNING: Failed to remove lvs on $vg." + pvs=$(exec_no_fds "$STOR_DEV_FDS" "pvs --select \"vg_name=$vg\" --noheadings -o pv_name") + wlog "VG $vg has PVs: $(echo $pvs), removing them." + for pv in $pvs; do + wlog "Removing PV $pv." + exec_no_fds "$STOR_DEV_FDS" "pvremove --force --force --yes $pv" 5 0.5 + [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Failed to remove PV." + done + # VG should no longer be present + vg_check=$(exec_no_fds "$STOR_DEV_FDS" "vgs --select \"vg_name=$vg\" --noheadings -o vg_name") + if [ -n "$vg_check" ]; then + wlog "WARNING: VG $vg is still present after removing PVs! Removing it by force." + exec_no_fds "$STOR_DEV_FDS" "vgremove --force $vg" 5 0.5 + [ $? -ne 0 ] && report_pre_failure_with_msg "ERROR: Failed to remove VG." + fi + done +fi + +display_volume_info "after" +display_mount_info + +ONLYUSE_HDD="" + +part_type_guid_str="Partition GUID code" +part_type_name_str="Partition name" +part_type_size_str="Partition size" +part_type_first_str="First sector" +part_type_end_str="Last sector" +part_type_flags_str="Attribute flags" + +if [ "$(curl -sf http://pxecontroller:6385/v1/upgrade/$(hostname)/in_upgrade 2>/dev/null)" = "true" ]; then + + # In an upgrade, only wipe the disk with the rootfs and boot partition + wlog "In upgrade, wiping only ${INSTDEV}" + WIPE_HDD=${INSTDEV} + ONLYUSE_HDD="$(basename ${INSTDEV})" + +else + + # Make a list of all the hard drives that are to be wiped. + # Never put the LAT install disk '${INSTDEV}' in that list. + WIPE_HDD="" + + # Partition type OSD has a unique globally identifier + CEPH_OSD_GUID="4FBD7E29-9D25-41B8-AFD0-062C0CEFF05D" + CEPH_JOURNAL_GUID="45B0969E-9B03-4F30-B4C6-B4B80CEFF106" + + # Check if we wipe OSDs + if [ "$(curl -sf http://pxecontroller:6385/v1/ihosts/wipe_osds 2>/dev/null)" = "true" ]; then + wlog "Wipe OSD data" + WIPE_CEPH_OSDS="true" + else + wlog "Skip Ceph OSD data wipe." + WIPE_CEPH_OSDS="false" + fi + + for dev in $STOR_DEVS + do + # TODO: Allowing the install dev 'in' results in a failure mode where + # every second install fails with the following error string + # and unrecoverable mount failure. + # + # Logs: + # + # Warning: The kernel is still using the old partition table. + # The new table will be used at the next reboot or after you + # run partprobe(8) or kpartx(8) + # and then + # + # Failure: + # + # mount: /sysroot: can't find LABEL=otaroot. + # + # Action: Find correct place to put partprobe + # + # Avoid wiping the install root disk + # [ ${dev} == ${INSTDEV} ] && continue + + # Avoid wiping USB drives + udevadm info --query=property --name=$dev |grep -q '^ID_BUS=usb' && continue + + # Avoid wiping ceph osds if sysinv tells us so + if [ ${WIPE_CEPH_OSDS} == "false" ]; then + wipe_dev="true" + + exec_no_fds "$STOR_DEV_FDS" "pvs" | grep -q "$dev *ceph" + if [ $? -eq 0 ]; then + wlog "skip rook provisoned disk $dev" + continue + fi + + part_numbers=( `parted -s $dev print | awk '$1 == "Number" {i=1; next}; i {print $1}'` ) + # Scanning the partitions looking for CEPH OSDs and + # skipping any disk found with such partitions + for part_number in "${part_numbers[@]}"; do + sgdisk_part_info=$(sgdisk -i $part_number $dev) + part_type_guid=$(echo "$sgdisk_part_info" | grep "$part_type_guid_str" | awk '{print $4;}') + if [ "$part_type_guid" == $CEPH_OSD_GUID ]; then + wlog "OSD found on $dev, skipping wipe" + wipe_dev="false" + break + fi + + exec_no_fds "$STOR_DEV_FDS" "pvs" | grep -q -e "${dev}${part_number} *ceph" -e "${dev}p${part_number} *ceph" + if [ $? -eq 0 ]; then + wlog "Rook OSD found on $dev$part_number, skip wipe" + wipe_dev="false" + break + fi + done + + if [ "$wipe_dev" == "false" ]; then + continue + fi + fi + + # Add device to the wipe list + devname=$(basename $dev) + if [ -e $dev -a "$ISO_DEV" != "../../$devname" -a "$USB_DEV" != "../../$devname" ]; then + ilog "Adding ${dev} to list of disks to be wiped" + if [ -n "$WIPE_HDD" ]; then + ilog "WIPE_HDD=$WIPE_HDD,$dev" + WIPE_HDD=$WIPE_HDD,$dev + else + ilog "WIPE_HDD=$dev" + WIPE_HDD=$dev + fi + fi + done + ilog "Not in upgrade" +fi + +ilog "***************************************************" +ilog "WIPE DISKs: ${WIPE_HDD}" +ilog "***************************************************" +by_dev=${INSTDEV} +# TODO: Avoid this loop if the INSTDEV does not have by-path in its name +for f in /dev/disk/by-path/*; do + if [ "${f}" == "${INSTDEV}" ] ; then + by_dev=$(get_disk "${INSTDEV}") + break + fi +done +for dev in ${WIPE_HDD//,/ } +do + ilog "Wiping $dev" + + # Clear previous GPT tables or LVM data on each disk. + # + # Rule: Exclude the persistent 'Platform backup' partition. + # Note: Delete the first few bytes at the start and end of the partition. + # This is required with GPT partitions because they save partition + # info at both the start and the end of the block. + + # Get a list of partitions for this disk + part_numbers=( $(parted -s $dev print | awk '$1 == "Number" {i=1; next}; i {print $1}') ) + + # For each '/dev/${dev}${part_number} apply wipe rules + for part_number in "${part_numbers[@]}"; do + sgdisk_part_info=$(sgdisk -i $part_number $dev) + part_name=$(echo "$sgdisk_part_info" | grep "$part_type_name_str" | awk '{print $3;}') + + # special handling for the install device '${INSTDEV}' + if [ "${dev}" == "${by_dev}" ] ; then + + # Skip over the bios, efi and boot partitions that got us here. + # LAT handles these partitions + case ${part_name} in + "'bios'") + ilog "skipping ${part_name} on ${dev}${part_number}" + continue + ;; + "'otaefi'") + ilog "skipping ${part_name} on ${dev}${part_number}" + continue + ;; + "'otaboot'") + ilog "skipping ${part_name} on ${dev}${part_number}" + continue + ;; + "'otaboot_b'") + ilog "skipping ${part_name} on ${dev}${part_number}" + continue + ;; + "'otaroot'") + ilog "skipping ${part_name} on ${dev}${part_number}" + continue + ;; + "'fluxdata'") + ilog "skipping ${part_name} on ${dev}${part_number}" + continue + ;; + *) + dlog "wipe candidate ${part_name} on ${dev}${part_number}" + ;; + esac + fi + + # Deal with ssd's which have different partition labelling convention + part=$dev$part_number + case $part in + *"nvme"*) + part=${dev}p${part_number} + ;; + esac + + # ISSUE: ERIK: These are never the same when the by-path INSTDEV is used. + # dev = /dev/sda INSTDEV = by path string + ilog "Checking platform-backup partition ... $dev : ${INSTDEV} ${by_dev}" + sgdisk_part_info=$(sgdisk -i $part_number $dev) + part_type_guid=$(echo "$sgdisk_part_info" | grep "$part_type_guid_str" | awk '{print $4;}') + if [ "$dev" == "${by_dev}" -a "$part_type_guid" == $BACKUP_PART_GUID ] ; then + part_type_name=$(echo "$sgdisk_part_info" | grep "$part_type_name_str" | awk '{print $3,$4;}') + BACKUP_PART_NAME=${part_type_name:1:-1} + + part_type_first=$(echo "$sgdisk_part_info" | grep "$part_type_first_str" | awk '{print $3;}') + BACKUP_PART_FIRST=${part_type_first} + + part_type_end=$(echo "$sgdisk_part_info" | grep "$part_type_end_str" | awk '{print $3;}') + BACKUP_PART_END=${part_type_end} + + part_type_size=$(echo "$sgdisk_part_info" | grep "$part_type_size_str" | awk '{print $3;}') + BACKUP_PART_SIZE=${part_type_size} + + part_type_flags=$(echo "$sgdisk_part_info" | grep "$part_type_flags_str" | awk '{print $3;}') + BACKUP_PART_FLAGS=${part_type_flags} + + ilog "Platform Backup: ${BACKUP_PART_NAME}:${BACKUP_PART_FIRST}:${BACKUP_PART_END}:${BACKUP_PART_SIZE}:${part_type_guid}" + + part_fstype=$(exec_retry 5 0.5 "blkid -s TYPE -o value $part") + if [ "${part_fstype}" == "ext4" ]; then + ilog "Skipping wipe of persistent partition $part" + BACKUP_CREATED=1 + continue + fi + fi + + if [ $WIPE_CEPH_OSDS == "true" -a "$part_type_guid" == $CEPH_JOURNAL_GUID ]; then + # Journal partitions require additional wiping. Based on the ceph-manage-journal.py + # script in the integ repo (at the ceph/ceph/files/ceph-manage-journal.py location) + # wiping 100MB of data at the beginning of the partition should be enough. We also + # wipe 100MB at the end, just to be safe. + ilog "Wiping Ceph ${part_name} on ${part} start and end with dd" + dd if=/dev/zero of=$part bs=1M count=100 2>/dev/null + dd if=/dev/zero of=$part bs=1M count=100 seek=$(( `blockdev --getsz $part` / (1024 * 2) - 100 )) 2>/dev/null + else + ilog "STUBBED Wiping ${part_name} on ${part} start and end with dd" + # dd if=/dev/zero of=$part bs=512 count=34 2>/dev/null + # dd if=/dev/zero of=$part bs=512 count=34 seek=$((`blockdev --getsz $part` - 34)) 2>/dev/null + fi + done + + if [ ${BACKUP_CREATED} -eq 0 -o "${dev}" != "${by_dev}" ]; then + ilog "Creating disk label for $dev" + parted -s $dev mktable gpt + ilog "... done" + fi +done + +# Zap all disks except for the install disk +for dev in $STOR_DEVS; do + if [ ${dev} != "${by_dev}" ] ; then + ilog "Zapping ${dev}" + sgdisk -Zo ${dev} + fi +done + +wlog "Destroy otaroot partitions on root disk" +for oldrootlabel in otaroot otaroot_1 otaroot_b otaroot_b_1 +do + oldrootpart=$(blkid --label $oldrootlabel) + [ -z "$oldrootpart" ] && continue + + oldinstdev=/dev/$(lsblk $oldrootpart -n -o pkname) + ilog "... destroying ${oldrootpart} on ${oldinstdev}" + + # sgdisk - Command-line GUID partition table (GPT) manipulator + # Zap the entire partition + ilog "... zapping ${oldinstdev}" + sgdisk -Zo ${oldinstdev} + + # partprobe - inform the OS of partition table changes + # root@(none):/# partprobe /dev/sda -s + # /dev/sda: gpt partitions 1 2 3 4 5 6 + ilog "... probing ${oldinstdev}" + partprobe ${oldinstdev} + + # wipefs - wipe a signature from a device + ilog "... wiping ${oldinstdev}" + wipefs --all --backup ${oldinstdev} +done + +# Override installer variable to not prompt for erasing the disk +export INSTW=0 + +true +%end + +########################################################################### + +%part --interpreter=/bin/bash +HOOK_LABEL=" part" +. /tmp/lat/ks_functions.sh +ilog "****************************************************" +ilog "*** Partition - Partition Disks & Create Volumes ***" +ilog "****************************************************" + +ilog "Allocate host partitions (MB) first:$first" + +## NOTE: updates to partition sizes need to be also reflected in +## _controller_filesystem_limits() in sysinv/api/controllers/v1/istorconfig.py + +ROOTFS_PART_PREFIX=${INSTDEV} +#check if disk is nvme +case $INSTDEV in + *"nvme"*) + ROOTFS_PART_PREFIX=${INSTDEV}p + ;; +esac + +########################################################### +# From pre_disk_controller.cfg +########################################################### + +# Only controllers have a persistent partition +# Allocate platform backup partition +if [ "${controller}" = true ] ; then + + PLATFORM_BACKUP_SIZE=${DEFAULT_PERSISTENT_SIZE} + + if [ -z "$persistent_size" ]; then + # Default backup partition size in MiB + ilog "Platform Backup persistent size not on command line ; defaulting to ${DEFAULT_PERSISTENT_SIZE}" + persistent_size=${DEFAULT_PERSISTENT_SIZE} + fi + + if [ ${persistent_size} -lt ${DEFAULT_PERSISTENT_SIZE} ] ; then + wlog "Cannot set persistent_size smaller than default size of ${DEFAULT_PERSISTENT_SIZE} KB" + else + PLATFORM_BACKUP_SIZE=${persistent_size} + fi + ilog "Platform Backup partition size: ${PLATFORM_BACKUP_SIZE}" + + if [ -d /sys/firmware/efi ] ; then + ilog "UEFI Firmware" + else + ilog "BIOS Firmware" + fi + + if [ ${BACKUP_CREATED} -eq 0 ] ; then + ilog "Platform Backup partition not detected: CREATING" + else + BACKUP_PERSISTED=1 + ilog "Platform Backup Partition was detected: PERSISTING" + fi + + if [ ${aio} = true ] ; then + ilog "AIO Controller: platform_pv partition - minimizing space allocation" + get_aio_controller_provisioning_sizes + fi + + grub_pt_update + end=$(($first+($PLATFORM_BACKUP_SIZE*1024*1024/$lsz)-1)) + a="$a -n $p:$first:$end -c $p:${BACKUP_PART_LABEL} -t $p:${BACKUP_PART_GUID}" +fi + +# Allocate platform pv +grub_pt_update +if [ ${aio} = true ] ; then + end=$(($first+(${MINIMUM_PLATFORM_PV_SIZE}*1024*1024/$lsz)-1)) +else + ilog "Standard Controller: platform_pv partition - using all remaining disk space" + end=$last +fi +a="$a -n $p:$first:$end -c $p:platform_pv -t $p:8E00" + +STOR_DEVS=$(echo "$STOR_DEVS" | xargs -n 1 | sort -u | xargs) +[ -z "$STOR_DEVS" ] && report_failure_with_msg "No storage devices available." +ilog "STOR_DEV_FDS Updated ; $STOR_DEV_FDS" + +# reset $dev to INSTDEV as LAT installer will partition the disk corresponding +# to that variable +dev=$INSTDEV + +dlog "Requesting ${dev} Partition Table: ${a}" + +true +%end + +########################################################################### + +%mkfs --interpreter=/bin/bash +HOOK_LABEL="mkfs" +. /tmp/lat/ks_functions.sh +ilog "****************************************************" +ilog "** Mkfs - Create Volume Groups & Logical Volumes **" +ilog "****************************************************" + +####################################################### +# From pre_disk_aio +###################################################### + +ilog "LAT size parameters: FSZ=${FSZ} BSZ=${BSZ} RSZ=${RSZ} VSZ=${VSZ} gb:${gb}" + +if [ "${controller}" = true ] ; then + LOG_VOL_SIZE=8000 + SCRATCH_VOL_SIZE=16000 + + if [ ! -z "$persistent_size" ]; then + # Default backup partition size in MiB + persistent_size=${DEFAULT_PERSISTENT_SIZE} + fi + # PLATFORM_BACKUP_SIZE=${persistent_size} + ilog "Persistent Size: $persistent_size ${PLATFORM_BACKUP_SIZE}" +fi + +if [ "${aio}" = true ] ; then + get_aio_controller_provisioning_sizes +elif [ "${controller}" = true ] ; then + get_std_controller_provisioning_sizes +fi + +ilog "MINIMUM_PLATFORM_PV_SIZE : ${MINIMUM_PLATFORM_PV_SIZE}" +ilog "SCRATCH_VOL_SIZE : ${SCRATCH_VOL_SIZE}" +ilog "ROOTFS_SIZE : ${ROOTFS_SIZE}" +ilog "LOG_VOL_SIZE : ${LOG_VOL_SIZE}" +ilog "PLATFORM_BACKUP_SIZE : ${PLATFORM_BACKUP_SIZE}" + +ilog "BACKUP_PART : ${BACKUP_PART}" +ilog "BACKUP_PART_NO : ${BACKUP_PART_NO}" +ilog "BACKUP_PART_LABEL : ${BACKUP_PART_LABEL}" +ilog "BACKUP_PART_GUID : ${BACKUP_PART_GUID}" + +vg="volume group" +lv="logical volume" +dev=$(get_disk "${INSTDEV}") + +# Only init Platform Backup partition filesystem if the partition was just created +pi=$((pi+1)) +if [ ${BACKUP_PERSISTED} -eq 0 ] ; then + ilog "Platform Backup Partition was CREATED. Initialize filesystem on ${BACKUP_PART}" + mkfs.ext4 -F -L ${BACKUP_PART_LABEL} ${BACKUP_PART} + [ ${?} -ne 0 ] && report_failure_with_msg "Failed Platform Backup partition filesystem init ${BACKUP_PART}" +fi + +# Log important LVM config settings +log_lvm_conf + +# Create Volume Group +pi=$((pi+1)) + +case ${dev} in + *"nvme"*) + pv_part=${dev}p${pi} + ;; + *) + pv_part=${dev}${pi} + ;; +esac + +ilog "cgts--vg-log--lv size: ${LOG_VOL_SIZE} MB" +ilog "cgts--vg-scratch--lv : ${SCRATCH_VOL_SIZE} MB" +ilog "Install disk: ${INSTDEV}" +ilog "Current disk: ${dev} ; current partition index:$pi" +ilog "Physical Volume: ${pv_part}" + +ilog "Create ${vg} 'cgts-vg' ${pv_part} ; $STOR_DEV_FDS" +exec_no_fds "$STOR_DEV_FDS" "vgcreate -y --force cgts-vg ${pv_part} 2>/dev/null" 5 0.5 +[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${vg} 'cgts-vg' ${pv_part}" + +# Create and Init the '/var/log' logical volume +ilog "Create ${lv} 'log-lv' ; $STOR_DEV_FDS" +exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n log-lv --size ${LOG_VOL_SIZE}MB cgts-vg 2>/dev/null" 5 0.5 +[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'log-lv'" + +ilog "InitFs ${lv} 'log-lv'" +mkfs.ext4 -F /dev/cgts-vg/log-lv +[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'log-lv'" + +# Create and init the '/scratch' logical volume +ilog "Create ${lv} 'scratch-lv' ; $STOR_DEV_FDS" +exec_no_fds "$STOR_DEV_FDS" "lvcreate -y -Wy -Zy -n scratch-lv --size ${SCRATCH_VOL_SIZE}MB cgts-vg 2>/dev/null" 5 0.5 +[ ${?} -ne 0 ] && report_failure_with_msg "Failed to create ${lv} 'scratch-lv'" + +ilog "InitFs ${lv} 'scratch-lv'" +mkfs.ext4 -F /dev/cgts-vg/scratch-lv +[ ${?} -ne 0 ] && report_failure_with_msg "Failed to init ${lv} 'scratch-lv'" + +####################################################################### +# From post_lvm_on_rootfs.cfg (all hosts) +####################################################################### + +# uncomment the global_filter line in lvm.conf +perl -0777 -i.bak -pe 's:(# This configuration option has an automatic default value\.\n)\t# global_filter:$1 global_filter:m' /etc/lvm/lvm.conf +perl -0777 -i -pe 's:(# Example\n)\t# preferred_names:$1 preferred_names:m' /etc/lvm/lvm.conf + +# Get the LVM disk partition and add it to the lvm.conf file +LV_ROOTDISK=$(exec_no_fds "$STOR_DEV_FDS" "pvdisplay --select 'vg_name=cgts-vg' -C -o pv_name --noheadings") +[ -z ${LV_ROOTDISK} ] && report_failure_with_msg "Failed to identify logical volume rootdisk via pvdisplay" + +# Edit the LVM config so LVM only looks for LVs on ${LV_ROOTDISK} +ilog "Edit the LVM config so LVM only looks for LVs on the root disk" +sed -i "s#^\( *\)global_filter = \[.*#\1global_filter = [ \"a|${LV_ROOTDISK}|\", \"r|.*|\" ]#" /etc/lvm/lvm.conf + +# Log important LVM config settings +log_lvm_conf + +##################################################################### +# From pre_disk_setup_tail.cfg +##################################################################### + +# Close all FDs and wait for udev to reshuffle all partitions. +wlog "Releasing storage device locks and FDs." +for fd in $STOR_DEV_FDS +do + flock -u "$fd" + exec {fd}>&- +done +sleep 2 +udevadm settle --timeout=300 || report_failure_with_msg "udevadm settle failed" + +#lsblk -o name,mountpoint,label,size,uuid + +# Rescan LVM cache to avoid warnings for VGs that were recreated. +pvscan --cache 2>/dev/null + +true +%end + +########################################################################### + +%post --interpreter=/bin/bash +HOOK_LABEL="post" +. /tmp/lat/ks_functions.sh +ilog "****************************************************" +ilog "**** Post - Traits & Platform Config File update **" +ilog "****************************************************" + +set -- `env` +dlog "env: $*" + +if false ; then +# TODO: Why does LAT break into prompt when I do this +for e in $*; do + case "$e" in + *=*) + eval $e 2>/dev/null + log "env : $e" + ;; + esac +done +fi + +# Set node traits' state +[ "${controller}" = true ] && ilog "Controller Function" +[ "${storage}" = true ] && ilog "Storage Function" +[ "${worker}" = true ] && ilog "Worker Function" +[ "${lowlatency}" = true ] && ilog "Low Latency Function" +[ "${controller}" = true -a ${worker} = true ] && aio=true + +# Parse traits to nodetype, subfunction and system_type +# ----------------------------------------------------- + +# Set nodetype from traits +if [ "${controller}" = true ] ; then + nodetype=${TRAIT__CONTROLLER} + ilog "Controller Function" +elif [ "${storage}" = true ] ; then + nodetype=${TRAIT__STORAGE} + ilog "Storage Function" +elif [ "${worker}" = true ] ; then + nodetype=${TRAIT__WORKER} +else + elog "No personality traits specified ; defaulting to All-In-One" + controller=true + worker=true + nodetype=${TRAIT__CONTROLLER} +fi +ilog "nodetype=${nodetype}" + +# Set system type and subfunction +subfunction="" +system_type="" +[ "${controller}" = true -a "${worker}" = true ] && aio=true +if [ "${aio}" = true ] ; then + ilog "${SYSTEM_TYPE__AIO} System" + system_type="${SYSTEM_TYPE__AIO}" + if [ "${lowlatency}" = true ] ; then + subfunction="${SUBFUNCTION__AIO_LOWLATENCY}" + else + subfunction="${SUBFUNCTION__AIO}" + fi +else + ilog "${SYSTEM_TYPE__STANDARD} System" + system_type="${SYSTEM_TYPE__STANDARD}" + if [ "${worker}" = true ] ; then + subfunction=${SUBFUNCTION__WORKER} + elif [ "${storage}" = true ] ; then + subfunction=${SUBFUNCTION__STORAGE} + else + subfunction=${SUBFUNCTION__CONTROLLER} + fi +fi +ilog "subfunction=${subfunction}" +ilog "system_type=${system_type}" + +# Create and Update /etc/platform/platform.conf +# --------------------------------------------- + +if [ -e "${PLATFORM_CONF}" ] ; then + wlog "removing temp platform.conf" +fi + +################################################################# +# From post_platform_conf_controller.cfg +# From post_platform_conf_aio.cfg +# From post_platform_conf_aio_lowlatency.cfg +################################################################# + +ilog "create platform.conf and set personality traits" +[ ! -d "/etc/platform" ] && mkdir -p -m 0775 /etc/platform +cat < ${PLATFORM_CONF} +nodetype=${nodetype} +subfunction=${subfunction} +system_type=${system_type} +EOF + +# Set http port +# Persist the default http port number to platform configuration. +# This will get overwritten when by manifest during sw configuration phase. +if [[ "${insturl}" == *"http"* ]] ; then + http_port=$(echo $(cat /proc/cmdline |xargs -n1 echo |grep '^insturl=' | sed -r 's#^[^/]*://[^/]*:([0-9]*)/.*#\1#')) +else + http_port=8080 +fi +update_platform_conf "http_port=${http_port}" + +############################################################# +# From post_common.cfg (all hosts) +############################################################# + +# Ensure quick command response (i.e. sudo) +rm /etc/hostname + +# TODO: is this needed with LAT ?? +# If using a serial install make sure to add a getty on the tty1 +conarg=`cat /proc/cmdline |xargs -n1 echo |grep console= |grep ttyS` +if [ -n "$conarg" ] ; then + echo "1:2345:respawn:/sbin/mingetty tty1" >> /etc/inittab +fi + +blkid >> ${LOGFILE} + +# TODO: See if other post_common.cfg content is needed + +true +%end + +########################################################################### + +%post --interpreter=/bin/bash +HOOK_LABEL="post" +. /tmp/lat/ks_functions.sh +ilog "****************************************************" +ilog "*** Post - Set Kernel Args ****" +ilog "****************************************************" + +########################################################### +# From post_kernel_controller.cfg +# From post_kernel_aio_worker.cfg +########################################################### + +. /etc/platform/platform.conf + +# Prepare the disk boot kernel comand line +# ---------------------------------------- +KERN_OPTS="${KERNEL_PARAMS}" +ilog "Building up KERN_OPTS: ${KERN_OPTS}" + +function add_kernel_option() +{ + option="${1}" + ilog "... adding: ${option}" + + # avoid adding leading space on first option + if [ "${KERN_OPTS}" = "" ] ; then + KERN_OPTS="${option}" + else + KERN_OPTS="${KERN_OPTS} ${option}" + fi +} + +# If the installer asked us to use security related kernel params, use +# them in the grub line as well (until they can be configured via puppet) +security_feature="" + +# Handle security options +# TODO: Create a list and loop over it +security_options="nopti nospectre_v2 nospectre_v1" +for o in ${security_options} +do + grep -q ${o} /proc/cmdline + if [ $? -eq 0 ]; then + add_kernel_option "${o}" + if [ "${security_feature}" = "" ] ; then + security_feature="${o}" + else + security_feature="${security_feature} ${o}" + fi + fi +done + +# TODO: Remove as it turns out that this is not added by kickstarts. +# Remove all reference to 'security_feature' above as well. +# +# add security_feature to platform.conf ; be sure not to add as empty. +# [ -z "${security_feature}" ] && security_feature=none +# update_platform_conf "security_feature=${security_feature}" + +[ "${KERN_OPTS}" != "" ] && ilog "Learned kernel params: ${KERN_OPTS}" + +if [ "${aio}" = true ] ; then + + ilog "Adding ${SYSTEM_TYPE__AIO} kernel options" + if [ -e /etc/init.d/cpumap_functions.sh ] ; then + + # Update grub with custom kernel bootargs + source /etc/init.d/cpumap_functions.sh + + n_cpus=$(cat /proc/cpuinfo 2>/dev/null | \ + awk '/^[pP]rocessor/ { n +=1 } END { print (n>0) ? n : 1}') + ilog "cpumap: n_cpus:${n_cpus}" + + n_numa=$(ls -d /sys/devices/system/node/node* 2>/dev/null | wc -l) + ilog "cpumap: n_numa:${n_numa}" + + KERN_OPTS="${KERN_OPTS} iommu=pt" + KERN_OPTS="${KERN_OPTS} hugepagesz=2M hugepages=0 default_hugepagesz=2M" + + # If this is an all-in-one system, we need at least 4 CPUs + if [ "${aio}" = true -a ${n_cpus} -lt 4 ]; then + report_failure_with_msg "At least 4 CPUs are required for ${SYSTEM_TYPE__AIO} node." + fi + + # Add kernel options for cpu isolation / affinity + if [ ${n_cpus} -gt 1 ] ; then + + base_cpulist=$(platform_expanded_cpu_list) + ilog "cpumap: base_cpulist: ${base_cpulist}" + + base_cpumap=$(cpulist_to_cpumap ${base_cpulist} ${n_cpus}) + ilog "cpumap: base_cpumap: ${base_cpumap}" + + avp_cpulist=$(vswitch_expanded_cpu_list) + ilog "cpumap: avp_cpulist:${avp_cpulist}" + if [ -e /etc/vswitch/vswitch.conf ] ; then + # Update vswitch.conf + sed -i "s/^VSWITCH_CPU_LIST=.*/VSWITCH_CPU_LIST=\"${avp_cpulist}\"/" /etc/vswitch/vswitch.conf + else + wlog "Missing /etc/vswitch/vswitch.conf ; update bypassed" + fi + + norcu_cpumap=$(invert_cpumap ${base_cpumap} ${n_cpus}) + ilog "cpumap: norcu_cpumap:${norcu_cpumap}" + + norcu_cpulist=$(cpumap_to_cpulist ${norcu_cpumap} ${n_cpus}) + ilog "cpumap: norcu_cpulist:${norcu_cpulist}" + + if [ "${lowlatency}" = true ]; then + KERN_OPTS="${KERN_OPTS} nohz_full=${norcu_cpulist}" + fi + + KERN_OPTS="${KERN_OPTS} rcu_nocbs=${norcu_cpulist}" + KERN_OPTS="${KERN_OPTS} kthread_cpus=${base_cpulist}" + KERN_OPTS="${KERN_OPTS} irqaffinity=${norcu_cpulist}" + fi + else + wlog "Missing /etc/init.d/cpumap_functions.sh ; cpumap setup bypassed" + fi + + # Add kernel options to set NMI watchdog + if [ "${lowlatency}" = true ] ; then + add_kernel_option "nmi_watchdog=0 softlockup_panic=0" + else + add_kernel_option "nmi_watchdog=panic,1 softlockup_panic=1" + fi + + if [[ "$(dmidecode -s system-product-name)" =~ ^ProLiant.*Gen8$ ]]; then + add_kernel_option "intel_iommu=on,eth_no_rmrr" + else + add_kernel_option "intel_iommu=on" + fi + + # Add kernel option to disable biosdevname if enabled + # As this may already be in GRUB_CMDLINE_LINUX, only add if it is not already present + grep -q '^GRUB_CMDLINE_LINUX=.*biosdevname=0' /etc/default/grub + if [ $? -ne 0 ]; then + add_kernel_option "biosdevname=0" + fi + + # Add kernel options to disable kvm-intel.eptad on Broadwell + # Broadwell: Model: 79, Model name: Intel(R) Xeon(R) CPU E5-2699 v4 @ 2.20GHz + if grep -q -E "^model\s+:\s+79$" /proc/cpuinfo + then + add_kernel_option "kvm-intel.eptad=0" + fi + + # k8s updates: + #KERN_OPTS="${KERN_OPTS} cgroup_disable=memory" + add_kernel_option "user_namespace.enable=1" + + # Add kernel option to avoid jiffies_lock contention on real-time kernel + if [ "${lowlatency}" = true ] ; then + add_kernel_option "skew_tick=1" + fi + +elif [ "${controller}" = true ] ; then + + ilog "Adding ${TRAIT__CONTROLLER} function kernel options" + + ## Custom kernel options + add_kernel_option "intel_iommu=off usbcore.autosuspend=-1" + + ## Setup the loop module to support up to 15 partitions so that we + ## can enable the customer to manually resize images if needed. + ## + add_kernel_option "loop.max_part=15" + + ## Add kernel options to ensure an selinux is disabled + add_kernel_option "selinux=0 enforcing=0" + + # Add kernel options to ensure NMI watchdog is enabled, if supported + add_kernel_option "nmi_watchdog=panic,1 softlockup_panic=1" + + # Add kernel option to panic on a softdog timeout + add_kernel_option "softdog.soft_panic=1" + + # Add kernel option to disable biosdevname if enabled + # As this may already be in GRUB_CMDLINE_LINUX, only add if it is not already present + grep -q '^GRUB_CMDLINE_LINUX=.*biosdevname=0' /etc/default/grub + [ $? -ne 0 ] && add_kernel_option "biosdevname=0" + + # k8s updates + add_kernel_option "user_namespace.enable=1" +else + wlog "TODO: system node install type kernel parameters, worker and storage" +fi + +# Make sure that we are using cgroups v1 +add_kernel_option "systemd.unified_cgroup_hierarchy=0" + +ilog "Adding these kernel params to disk boot: ${KERN_OPTS}" +if [ -n "${KERN_OPTS}" ] ; then + grep -q "^kernel_params=" /boot/efi/EFI/BOOT/boot.env + if [ ${?} -ne 0 ]; then + # Add line + sed -i "1 a kernel_params=${KERN_OPTS}" /boot/efi/EFI/BOOT/boot.env + else + # Update existing + sed -i "s/^kernel_params=.*/kernel_params=${KERN_OPTS}/" /boot/efi/EFI/BOOT/boot.env + fi +else + wlog "no kernel options added" +fi + +###################################################################### +# From post_system_aio +###################################################################### +if [ "${aio}" = true ] ; then + + ## Reserve more memory for base processes since the controller has higher + ## memory requirements but cap it to better handle systems with large + ## amounts of memory + TOTALMEM=$(grep MemTotal /proc/meminfo | awk '{print int($2/1024)}') + ilog "${SYSTEM_TYPE__AIO} MemTotal:${TOTALMEM}" + + if [ -e /sys/devices/system/node/node0 ]; then + RESERVEDMEM=$(grep MemTotal /sys/devices/system/node/node0/meminfo | awk '{printf "%d\n", $4/1024}') + else + RESERVEDMEM=$(grep MemTotal /proc/meminfo | awk '{print int($2/1024/4)}') + fi + + if [ ${RESERVEDMEM} -lt 6144 ]; then + RESERVEDMEM=6144 + elif [ ${RESERVEDMEM} -gt 14500 ]; then + RESERVEDMEM=14500 + elif [ ${RESERVEDMEM} -gt 8192 ]; then + RESERVEDMEM=8192 + fi + + ilog "${SYSTEM_TYPE__AIO} Reserved Memory: ${RESERVEDMEM}" + sed -i -e "s#\(WORKER_BASE_RESERVED\)=.*#\1=(\"node0:${RESERVEDMEM}MB:1\" \"node1:2000MB:0\" \"node2:2000MB:0\" \"node3:2000MB:0\")#g" /etc/platform/worker_reserved.conf + worker_reserved=$(grep WORKER_BASE_RESERVED /etc/platform/worker_reserved.conf) + ilog "${SYSTEM_TYPE__AIO} '${worker_reserved}'" + + # Update WORKER_CPU_LIST + N_CPUS=$(cat /proc/cpuinfo 2>/dev/null | awk '/^[pP]rocessor/ { n +=1 } END { print (n>0) ? n : 1}') + sed -i "s/^WORKER_CPU_LIST=.*/WORKER_CPU_LIST=\"0-$((N_CPUS-1))\"/" /etc/platform/worker_reserved.conf + + worker_cpu_list=$(grep WORKER_CPU_LIST /etc/platform/worker_reserved.conf) + ilog "${SYSTEM_TYPE__AIO} '${worker_cpu_list}'" +fi + +true +%end + +########################################################################### + +%post --interpreter=/bin/bash +HOOK_LABEL="post" +. /tmp/lat/ks_functions.sh + +ilog "****************************************************" +ilog "*** Post - Interface Setup ***" +ilog "****************************************************" + +########################################################### +# From post_pxeboot_controller +# From post_net_common.cfg +########################################################### + +# TODO: Not needed on a USB install. +# TODO: Need to adjust fault handling or condition on USB install. + +# Obtain the boot interface from the PXE boot +BOOTIF=$(cat /proc/cmdline |xargs -n1 echo |grep BOOTIF=) +BOOTIF=${BOOTIF#BOOTIF=} +mgmt_dev=lo +mgmt_vlan=0 +if [ -n "$BOOTIF" ] ; then + BOOTIF=$(echo $BOOTIF | sed -r -e 's/.*(..-..-..-..-..-..)$/\1/' -e 's/-/:/g') + ndev=`ip link show |grep -B 1 $BOOTIF |head -1 |awk '{print $2}' |sed -e 's/://'` + if [ -n "$ndev" ] ; then + # convert to predictive name + mgmt_dev=$(get_iface_from_ethname $ndev) + if [ "${mgmt_dev}" == "" ] ; then + elog "failed to get predictive altname from ${ndev}" + mgmt_dev=${ndev} + + # get vlan info for system node installs + system_node=$(is_system_node_install) + if [ "${system_node}" = true ] ; then + # Retrieve the management VLAN from sysinv if it exists + ilog "Querying system inventory for management vlan id" + mgmt_vlan=`curl -sf http://pxecontroller:6385/v1/isystems/mgmtvlan` + if [ ${?} -ne 0 ] ; then + # TODO: uncomment to force install failure for product + # report_failure_with_msg "Unable to communicate with System Inventory REST API. Aborting installation." + wlog "ERROR: Unable to communicate with System Inventory REST API." + fi + fi + else + ilog "Management Interface: ${ndev} -> ${mgmt_dev}" + fi + else + elog "ERROR:POST: Unable to determine mgmt interface from BOOTIF=$BOOTIF." + # TODO: MAKE Default - Should not get here without BOOTIF set ; LAT guarantees that. + # report_failure_with_msg "Unable to determine mgmt interface from BOOTIF=$BOOTIF." + fi +else + elog "ERROR:POST: BOOTIF is not set. Unable to determine mgmt interface." + # TODO: MAKE Default - Should not get here without BOOTIF set ; LAT guarantees that. +fi + +if [ ! -e "/etc/network/interfaces" ] ; then +cat << EOF >> /etc/network/interfaces +# This file describes the network interfaces available on the system +# and how to activate them. For more information , see interfaces(5) +source /etc/network/interfaces.d/* +EOF +fi + +if [ ! -d "/etc/network/interfaces.d" ] ; then + mkdir -p -m 0775 /etc/network/interfaces.d +fi + +# Build networking scripts, starting with the localhost interface +cat << EOF >> /etc/network/interfaces + +# The loopback network interface +auto lo +iface lo inet loopback +EOF + +if [ $mgmt_dev != "lo" ]; then +cat << EOF >> /etc/network/interfaces + +# management network interface +allow-hotplug $mgmt_dev +auto $mgmt_dev +iface $mgmt_dev inet dhcp + +EOF +fi + +ilog "Setup network scripts" + +if [ $mgmt_vlan -eq 0 ] ; then + + # Persist the boot device to the platform configuration. This will get + # overwritten later if the management_interface is on a bonded interface. + update_platform_conf "management_interface=$mgmt_dev" + + # Build networking scripts + cat << EOF > /etc/network/interfaces.d/ifcfg-lo +auto lo +iface lo inet static +address 127.0.0.1 +netmask 255.0.0.0 + post-up echo 0 > /proc/sys/net/ipv6/conf/lo/autoconf; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_redirects +EOF + + + cat << EOF > /etc/network/interfaces.d/ifcfg-$mgmt_dev +auto $mgmt_dev +iface $mgmt_dev inet manual + pre-up sleep 20 + post-up echo 0 > /proc/sys/net/ipv6/conf/lo/autoconf; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_redirects +EOF + +else + + # Check whether to use inet or inet6 + ipv6_addr=$(dig +short AAAA controller) + if [[ -n "$ipv6_addr" ]] + then + mgmt_address_family=inet6 + ipv6init=yes + dhcpv6c=yes + dhclientargs=-1 + else + mgmt_address_family=inet + ipv6init=no + dhcpv6c=no + dhclientargs= + fi + + # Persist the boot device to the platform configuration. This will get + # overwritten later if the management_interface is on a bonded interface. + update_platform_conf "management_interface=vlan$mgmt_vlan" + + # Build networking scripts + cat << EOF > /etc/network/interfaces.d/ifcfg-lo +auto lo +iface lo $mgmt_address_family static +address 127.0.0.1 +netmask 255.0.0.0 + post-up echo 0 > /proc/sys/net/ipv6/conf/lo/autoconf; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_redirects +EOF + + cat << EOF > /etc/network/interfaces.d/ifcfg-$mgmt_dev +auto $mgmt_dev +iface $mgmt_dev $mgmt_address_family manual + pre-up sleep 20 + post-up echo 0 > /proc/sys/net/ipv6/conf/lo/autoconf; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_redirects +EOF + + cat << EOF > /etc/network/interfaces.d/ifcfg-vlan$mgmt_vlan +auto vlan$mgmt_vlan +iface vlan$mgmt_vlan $mgmt_address_family dhcp + vlan-raw-device $mgmt_dev + pre-up sleep 20 + post-up echo 0 > /proc/sys/net/ipv6/conf/lo/autoconf; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_ra; echo 0 > /proc/sys/net/ipv6/conf/lo/accept_redirects +EOF +fi + +true +%end + +########################################################################## + +%post --interpreter=/bin/bash +HOOK_LABEL="post" +. /tmp/lat/ks_functions.sh +ilog "****************************************************" +ilog "*** Post - Kickstart Finalize Install UUID ***" +ilog "****************************************************" + +# Create a uuid specific to this installation +# install_uuid under /var needs to match what is written to /etc/platform/platform.conf +# When instflux=0 (/var not on a dedicated fluxdata partition) +# When instflux=1 (/var is part of the two different sysroot deployments). +# Therefore check if the file has been written and use that, otherwise generate it +ilog "Add install uuid to feed and platform.conf" +if [ -e "${LAT_DIR}/INSTALL_UUID" ]; then + INSTALL_UUID=$(< "${LAT_DIR}/INSTALL_UUID") +else + INSTALL_UUID=`uuidgen` + echo "${INSTALL_UUID}" > ${LAT_DIR}/INSTALL_UUID +fi + +[ ! -d "/var/www/pages/feed/rel-22.06" ] && mkdir -p -m 0755 /var/www/pages/feed/rel-22.06 +echo ${INSTALL_UUID} > /var/www/pages/feed/rel-22.06/install_uuid +update_platform_conf "INSTALL_UUID=${INSTALL_UUID}" + +true +%end + +########################################################################## + +%post --interpreter=/bin/bash +HOOK_LABEL="post" +. /tmp/lat/ks_functions.sh +ilog "****************************************************" +ilog "*** Post - Log Filesystem Setup ***" +ilog "****************************************************" + +display_volume_info "final" + +true +%end + +########################################################################## + +%post --interpreter=/bin/bash --nochroot +HOOK_LABEL="post_nochroot" +. /tmp/lat/ks_functions.sh + +# This needs to update all available ostree based rootfs + +ilog "****************************************************" +ilog "*** Post Nochroot - Set up /etc/fstab ***" +ilog "****************************************************" + +mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/opt/platform-backup +mkdir -p ${IMAGE_ROOTFS}/var/rootdirs/scratch +mkdir -p ${IMAGE_ROOTFS}/var/log +echo -e "LABEL=platform_backup\t/var/rootdirs/opt/platform-backup\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab +echo -e "/dev/mapper/cgts--vg-scratch--lv\t/var/rootdirs/scratch\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab +echo -e "/dev/mapper/cgts--vg-log--lv\t/var/log\text4\tdefaults\t1 2" >> ${IMAGE_ROOTFS}/etc/fstab + +eject $(eject -d | awk -F\` '{print $2}' | awk -F\' '{print $1}') + +# Create first_boot flag +touch ${IMAGE_ROOTFS}/etc/platform/.first_boot + +true +%end +